How to Change the Oil in a 2018 Polaris Outlaw 110 EFI

Maintaining your 2018 Polaris Outlaw 110 EFI is crucial for optimal performance and longevity. One of the most important maintenance tasks is changing the oil. Regular oil changes ensure that your engine runs smoothly and efficiently. Follow this guide to change the oil in your ATV.

Shop parts for a 2018 Polaris Outlaw 110 EFI ATV.

Tools & Materials Needed

  • Oil filter wrench
  • Drain pan
  • Socket wrench set
  • New oil filter
  • Engine oil (check your manual for specifications)
  • Funnel
  • Clean rags

Step-by-Step Guide

1. Prepare Your ATV

Ensure your ATV is on a level surface and the engine is cool. This prevents burns and ensures accurate oil drainage.

2. Locate the Drain Plug

The drain plug is located at the bottom of the engine. Place the drain pan underneath to catch the old oil.

3. Drain the Old Oil

Use a socket wrench to remove the drain plug. Allow the oil to completely drain into the pan. Once drained, replace and tighten the drain plug securely.

4. Replace the Oil Filter

Use the oil filter wrench to remove the old oil filter. Before installing the new filter, apply a small amount of new oil to the rubber gasket on the filter. Install the new filter by hand, ensuring it is snug but not overtightened.

5. Add New Oil

Remove the oil fill cap and use a funnel to add the new engine oil. Refer to your owner's manual for the correct oil type and capacity. After filling, replace the oil fill cap.

6. Check Oil Level

Start the engine and let it run for a few minutes. Turn it off and wait a few minutes for the oil to settle. Use the dipstick to check the oil level, adding more oil if necessary.

7. Dispose of Old Oil

Properly dispose of the old oil and filter at a recycling center or an auto shop that accepts used oil.

Important Notes for the 2018 Polaris Outlaw 110 EFI

The 2018 Polaris Outlaw 110 EFI is designed for young riders, so regular maintenance is key to ensuring safety and performance. Always use the recommended oil type and filter to maintain engine integrity. Regularly check for oil leaks and address any issues promptly to avoid engine damage.

By following these steps, you can ensure your Polaris Outlaw 110 EFI remains in top condition, providing a safe and enjoyable riding experience for years to come.

Related Shopping Categories

Shop Motor Oil for a 2018 Polaris Outlaw 110 EFI ATV.

Shop Oil Filters for a 2018 Polaris Outlaw 110 EFI ATV.

Shop Oil Drain Pans for a 2018 Polaris Outlaw 110 EFI ATV.

Shop Tools for a 2018 Polaris Outlaw 110 EFI ATV.

Shop Oil Fillers and Drain Plugs for a 2018 Polaris Outlaw 110 EFI ATV.

Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.