How to Change the Oil in a 2023 Beta 390 RR-S: A MotoSport Guide
Shop Parts for a 2023 Beta 390 RR-S Dirt Bike!
The Beta 390 RR-S is a remarkable dirt bike, renowned for its balanced power delivery and agile chassis. Regular oil changes are essential to keeping its high-performance four-stroke engine in top shape. This step-by-step guide is crafted specifically for owners of the 2023 Beta 390 RR-S, featuring proprietary tips, torque values, and model-specific notes to maximize your maintenance confidence.
What You"ll Need
- Beta-approved engine oil: 10W-50 (API SL/JASO MA2 recommended)
- New oil filter
- New O-rings for oil drain bolts, filter cover, and filler caps
- 13mm socket and wrench
- 8mm socket
- Measuring container (graduated), for precise oil quantities
- Drain pan
- Clean rags
- Torque wrench
- Optional: nitrile gloves, funnel
Step-by-Step Oil Change Instructions
- Warm up the engine for several minutes, then shut it off. This helps the oil flow more easily for thorough drainage.
- Remove the skid plate to access the drain plugs and filter zone.
- Place a drain pan under the engine. Remove both 8mm oil filter cover bolts, being prepared for a small volume of oil to drip.
- Take out the oil filter and its O-ring to fully drain used oil. Leave the cover off until drainage is complete.
- Using a 13mm socket, remove the engine oil drain bolt. Allow oil to drain completely.
- Loosen and remove the transmission oil drain bolt, draining the transmission oil completely as well.
- Inspect and replace O-rings on both drain bolts and the oil filter cover to ensure a leak-free seal.
- Reinstall the engine and transmission drain bolts. Tighten the engine drain bolt to 15 Nm and the transmission drain bolt to 20 Nm–do not overtighten.
- Confirm the oil filter orientation: the open end faces into the engine, solid end faces the cover. Install the new oil filter and new cover O-ring. Reinstall the filter cover, tightening bolts to 10 Nm.
-
Refill with oil: The 2023 Beta 390 RR-S separates engine and transmission oils. Use 750 ml for the engine and 750 ml for the transmission, as per Beta's specification.
Model-specific note: Some dealers and experienced owners use 650–750 ml in each compartment depending on riding conditions, but Beta's official fill spec remains 750 ml per side. Always fill, then run the engine for 2 minutes and check the oil sight window—the level should be near the center. If it"s slightly high or low, adjust accordingly. - Install new oil filler cap O-rings if supplied. Reinstall filler caps and snug them down.
- Double-check for leaks, reinstall the skid plate, and you"re ready to ride!
Special Model Notes for the 2023 Beta 390 RR-S
- Separate compartments: The 390 RR-S features independent engine and transmission oil systems. Always use fresh, correct-type oil in both compartments, and never swap oil between them—it is engineered for performance and longevity.
- Accurate measurement is critical: Overfilling can raise internal pressure, causing leaks or performance loss. Fill to spec, run the engine, then check the sight window—aim for the middle of the red circle.
- Frequent oil changes pay off: The 390 RR-S engine is highly tuned—Beta recommends frequent oil changes, especially if you ride hard, race, or cover many miles off-road.
Final Tips
- Discard used oil and filters responsibly. Many local shops and auto parts stores offer recycling.
- Keep a maintenance log with dates, hours, and oil type–this helps resale value and troubleshooting.
- Always use Beta-approved or high-quality filters and oils that meet or exceed recommended API and JASO ratings.
- If unsure about any step, consult your owner"s manual or seek a MotoSport service professional.
Related Shopping Categories
Shop Motor Oil for a 2023 Beta 390 RR-S Dirt Bike!
Shop Oil Filters for a 2023 Beta 390 RR-S Dirt Bike!
Shop Oil Drain Pans for a 2023 Beta 390 RR-S Dirt Bike!
Shop Tools for a 2023 Beta 390 RR-S Dirt Bike!
Shop Oil Fillers and Drain Plugs for a 2023 Beta 390 RR-S Dirt Bike!
Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.