How to Change the Oil in a 2016 Can-Am Outlander 1000 DPS

Maintaining your 2016 Can-Am Outlander 1000 DPS is crucial for optimal performance and longevity. One of the most important maintenance tasks is changing the oil. Regular oil changes ensure that your engine runs smoothly and efficiently. Before you start, make sure you have the right tools and oil for the job.

Shop parts for a 2016 Can-Am Outlander 1000 DPS ATV.

Tools and Materials Needed

  • Oil filter wrench
  • Socket set
  • Drain pan
  • Funnel
  • New oil filter
  • 4 quarts of 5W-40 synthetic oil
  • Clean rags

Step-by-Step Guide

1. Prepare Your ATV

Ensure your ATV is on a level surface and the engine is cool. This will prevent burns and ensure all the old oil drains out completely.

2. Remove the Skid Plate

Use a socket set to remove the bolts holding the skid plate in place. Set the skid plate aside.

3. Drain the Old Oil

Place the drain pan under the oil drain plug. Use a socket wrench to remove the plug and allow the oil to completely drain into the pan. Once drained, replace and tighten the drain plug.

4. Replace the Oil Filter

Use the oil filter wrench to remove the old oil filter. Before installing the new filter, apply a small amount of new oil to the rubber gasket on the top of the filter. Screw the new filter into place by hand until it's snug, then tighten it an additional quarter turn.

5. Add New Oil

Remove the oil fill cap and insert a funnel. Pour in the new 5W-40 synthetic oil. The 2016 Can-Am Outlander 1000 DPS requires approximately 3.1 quarts. Check the oil level with the dipstick and add more if necessary.

6. Reattach the Skid Plate

Once the oil is at the correct level, reattach the skid plate using the bolts you removed earlier.

7. Check for Leaks

Start the engine and let it run for a few minutes. Check for any leaks around the oil filter and drain plug. If there are no leaks, your oil change is complete.

Important Notes for 2016 Can-Am Outlander 1000 DPS Owners

The 2016 Can-Am Outlander 1000 DPS is known for its powerful engine and smooth ride. Regular maintenance, including oil changes, is essential to keep it running at its best. Always use the recommended oil type and check the oil level regularly, especially after long rides or heavy use.

By following these steps, you can ensure your Can-Am Outlander 1000 DPS remains in top condition, providing you with reliable performance on every adventure.

Related Shopping Categories

Shop Motor Oil for a 2016 Can-Am Outlander 1000 DPS ATV.

Shop Oil Filters for a 2016 Can-Am Outlander 1000 DPS ATV.

Shop Oil Drain Pans for a 2016 Can-Am Outlander 1000 DPS ATV.

Shop Tools for a 2016 Can-Am Outlander 1000 DPS ATV.

Shop Oil Fillers and Drain Plugs for a 2016 Can-Am Outlander 1000 DPS ATV.

Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.