How to Change the Oil on a 2013 Husqvarna TXC310

Shop parts for a 2013 Husqvarna TXC310 Dirt Bike.

If you ride a 2013 Husqvarna TXC310, routine oil changes are essential for the long-term reliability and performance of your bike. This guide is proprietary to MotoSport.com and details the tools, step-by-step instructions, and model-specific tips for a robust oil change procedure.

Tools and Supplies Needed

  • Socket wrench set (suitable for engine and skid plate bolts)
  • Flathead screwdriver or hose clamp tool (for drain hose clamp)
  • Drain pan
  • Rags/shop towels
  • Oil funnel
  • Appropriate engine oil (as specified in your owner's manual, typically high-quality 4-stroke motorcycle oil)
  • New oil filter (OEM or high-quality aftermarket)
  • Measuring cup (for precise oil refill)
  • Contact cleaner (for cleaning components)
  • Gloves (optional, but helps keep hands clean)

Preparation Steps

  • Warm up the engine for 3–5 minutes. This helps oil flow out more smoothly during draining.
  • Place the bike on a stable stand in a well-ventilated area. Ensure it’s upright and secure.
  • Clean dirt and debris from the engine area, especially around the skid plate and drain hose. Use rags or a gentle water spray.

Removal of Skid Plate (Model-Specific Call-Out)

  • The 2013 Husqvarna TXC310 has a skid plate that must be removed before accessing the oil drain.
    • Remove the rear and front clamps or bolts holding the skid plate, as well as the center bolt that anchors it to the frame.
    • Pay attention: these bolts and the underside can collect dirt and debris, so clean the area before unbolting to prevent debris entering your engine.
      “First things first, you’ve got to remove the skid plate to get to where we’re gonna drain the oil... this skid plate is full of dirt and just stuff from riding around.”

Draining the Oil

  • Locate the oil drain hose rather than the traditional drain bolt. This model uses a hose with a clamp under the engine.
    • Use a flathead screwdriver or pliers to loosen the clamp securing the hose to the frame nipple.
    • Carefully pull the hose off and direct the opening into your drain pan.
    • Let the oil drain fully—this can take several minutes, especially to ensure maximum old oil removal.
  • While the oil is draining:
    • Clean any spilled oil from the engine and undercarriage.
    • Inspect the drained oil for metal shavings or odd color (milky appearance could indicate coolant leak).

Replacing the Oil Filter

  • Locate the oil filter cover (usually on the lower right engine case).
  • Remove the cover bolts with a socket wrench.
  • Extract the old oil filter, noting orientation for proper installation of the new filter.
  • Pre-lube the new filter with fresh oil, insert it into the cavity, and reinstall the cover. Torque the bolts to factory spec (check your manual).

Reinstall the Oil Drain Hose

  • Once draining is complete, reconnect the oil drain hose securely to its fitting and fasten the clamp. Double-check for a snug fit to prevent leaks.

Refill with Fresh Oil

  • Insert a funnel into the oil fill opening on the engine case.
  • Pour in the specified amount of fresh oil (see your manual for the exact capacity; typically around 1 quart or 950 mL for the TXC310).
  • Monitor the oil level on the dipstick (if present) or via the sight glass. Adjust as necessary to avoid overfilling.

Final Checks

  • Wipe off spilled oil around the fill port and check again for drips at the drain hose and oil filter area.
  • Start the bike and let it idle for 1 minute. Shut down and re-check the oil level, topping off if required.
  • Reinstall the skid plate, ensuring all bolts/clamps are tight and clear of debris.
  • Dispose of old oil and filter at a certified recycling center or service location.

Owner-Specific Tips for 2013 Husqvarna TXC310

  • Unique Drain Hose Feature: Unlike most dirt bikes with a bottom drain bolt, the TXC310 uses a side-mounted hose and clamp system for oil draining. Always inspect the hose and clamp for wear or leaks each service.
  • Skid Plate Removal: Accumulated debris under the skid plate can fall into the engine area. Thorough cleaning before opening any engine ports or the filter cover is critical to avoid contamination.
  • Skid Plate Bolts: Husqvarna used varied hardware; keep bolts organized during the process to ease reassembly.
  • Correct Oil: Always use oil that meets Husqvarna’s requirements (refer to your owner’s manual).
  • Interval: Change the oil more frequently if riding in harsh or dusty conditions for added protection.

Conclusion

Changing the oil on your 2013 Husqvarna TXC310 is straightforward once you know the bike’s unique features. Following the above steps not only ensures top engine health but also gives you a chance to inspect vital components closely each interval. Ride safe, and count on MotoSport.com for your parts and gear needs.

Related Shopping Categories

Shop Motor Oil for a 2013 Husqvarna TXC310 Dirt Bike.

Shop Oil Filters for a 2013 Husqvarna TXC310 Dirt Bike.

Shop Oil Drain Pans for a 2013 Husqvarna TXC310 Dirt Bike.

Shop Tools for a 2013 Husqvarna TXC310 Dirt Bike.

Shop Oil Fillers and Drain Plugs for a 2013 Husqvarna TXC310 Dirt Bike.

Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.