How to Change the Coolant in a 2010 Husaberg FE450
Shop parts for your ride now. Shop parts for a 2010 Husaberg FE450 Dirt Bike. for radiators, gaskets, coolant hoses, and tools tailored to your bike.
Maintaining the cooling system in your 2010 Husaberg FE450 is essential for reliable engine performance on and off the trail. This guide details a robust, step-by-step approach to changing coolant in your FE450 – keeping it proprietary to MotoSport's standards and with unique notes for this model.
Why Fresh Coolant Matters
The FE450's high-revving engine generates significant heat. Regular coolant service prevents overheating, especially in these bikes which are known for their strong off-road performance – and sometimes localized hot spots at the head near exhaust valves. Using the correct coolant brings optimal corrosion resistance and ensures the water pump seals last as designed. Consider using a high-quality motorcycle coolant or a waterless option; both offer robust boil-over and anti-corrosion protection.
What You'll Need
- Fresh coolant (check your manual or choose a performance motorcycle coolant)
- Drain pan
- Basic hand tools (socket/wrench set, screwdrivers)
- Protective gloves and rags
- Distilled water if flushing
Step-by-Step Coolant Change Instructions
-
Preparation
Let the engine cool completely. Place the bike securely on a stand to keep it level. Remove the seat and shrouds if they block access to the radiator cap or hoses. -
Drain the Old Coolant
Locate the radiator cap – remove it carefully to relieve any pressure. Position a drain pan under the water pump. On the FE450, the coolant drain bolt is typically found at the lowest point of the water pump cover. Remove the bolt and allow all coolant to drain into the pan.
Tip: Check for signs of contamination or corrosion as it drains. If you observe oil in the coolant, inspect your water pump seals at the next opportunity. -
Flush the Cooling System (Recommended)
With the drain bolt still out, briefly pour distilled water into the radiator to flush residual old coolant. Allow it all to drain out. Reinstall the drain bolt and torque it securely. -
Refill with Fresh Coolant
Carefully pour coolant into the radiator until the level is 10 mm above the fins. For the 2010 Husaberg FE450, do not overfill, as the system needs expansion room for heated coolant.
Replace and tighten the radiator cap. -
Bleed Air from the System
Start the engine with the radiator cap off (if safe) or open the bleed screw briefly if equipped. Let the engine idle momentarily to circulate coolant. Watch for the coolant level to drop as air escapes; top off as needed. Replace the cap once air bubbles stop appearing. -
Check for Leaks & Proper Level
After warming up the bike and allowing it to cool, check the coolant level again and top off if needed. Inspect around the water pump, hoses, and drain bolt for leaks.
Special Notes for 2010 Husaberg FE450 Owners
- This model's water pump features dual seals (one for coolant, one for oil) with a weep hole between them. If you ever find coolant coming out of the weep hole, plan to replace seals to prevent cross-contamination, as long-term mixing will damage internal components.
- Localized "hot spot" boiling can occur near the exhaust-side head – maintaining clean, effective coolant minimizes this risk.
- The cooling system should be checked for airlocks after refilling; revisit the bleeder or crack a high point hose if you suspect trapped air.
- Monitor the condition of radiator hoses, clamps, and radiator fins periodically, as off-road riding can expose them to damage.
When to Replace Coolant
- Change the coolant at least once every two years, or more frequently if you ride in harsh conditions or compete regularly.
Final Tips
- Never open a hot radiator cap.
- Use only recommended coolant types for your FE450 to maintain seal and gasket life.
- If you routinely ride in extreme temperatures, consider a high-boiling-point or waterless coolant for added protection.
Stay proactive with your FE450’s coolant maintenance for maximum engine life and performance. MotoSport has all the parts you need whether you’re servicing your cooling system or tackling more extensive repairs.
Related Shopping Categories
Shop Radiators for a 2010 Husaberg FE450 Dirt Bike.
Shop Coolant for a 2010 Husaberg FE450 Dirt Bike.
Shop Temperature Sensors for a 2010 Husaberg FE450 Dirt Bike.
Shop Tools for a 2010 Husaberg FE450 Dirt Bike.
Shop Radiator Hoses for a 2010 Husaberg FE450 Dirt Bike.
Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.
