How to Change a Spark Plug in a 1979 Honda CR250

Maintaining your 1979 Honda CR250 is essential for optimal performance, and changing the spark plug is a key part of that maintenance. This guide will walk you through the process, ensuring your dirt bike runs smoothly. Shop parts for a 1979 Honda CR250 Dirt Bike.

Tools and Materials Needed

  • Spark plug socket
  • Ratchet wrench
  • New spark plug (check your owner's manual for the correct type)
  • Gap tool
  • Anti-seize lubricant

Step-by-Step Guide

Step 1: Prepare Your Bike

Ensure your CR250 is on a stable surface and the engine is cool to the touch. Disconnect the spark plug wire by pulling it straight off the plug.

Step 2: Remove the Old Spark Plug

Use the spark plug socket and ratchet wrench to carefully unscrew the old spark plug. Turn counterclockwise until it is free from the engine.

Step 3: Check the New Spark Plug

Before installing, check the gap on the new spark plug using a gap tool. The correct gap for the 1979 Honda CR250 is typically around 0.028 to 0.031 inches. Adjust if necessary.

Step 4: Install the New Spark Plug

Apply a small amount of anti-seize lubricant to the threads of the new spark plug. Carefully thread it into the engine by hand to avoid cross-threading. Once hand-tight, use the spark plug socket and ratchet to snug it up – do not over-tighten.

Step 5: Reattach the Spark Plug Wire

Firmly push the spark plug wire back onto the new spark plug until it clicks into place.

Important Notes for 1979 Honda CR250 Owners

The 1979 Honda CR250 is a classic model known for its robust performance and reliability. Regular maintenance, including spark plug changes, is crucial to keep it running at its best. Always use the recommended parts and follow the manufacturer's guidelines for maintenance intervals.

By following these steps, you can ensure your 1979 Honda CR250 remains in top condition, ready for your next ride. Remember, regular maintenance not only enhances performance but also extends the life of your dirt bike.

Related Shopping Categories

Shop Spark Plugs for a 1979 Honda CR250 Dirt Bike.

Shop Engine Tools for a 1979 Honda CR250 Dirt Bike.

Shop Feeler Gauges for a 1979 Honda CR250 Dirt Bike.

Shop Batteries for a 1979 Honda CR250 Dirt Bike.

Shop Tools for a 1979 Honda CR250 Dirt Bike.

Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.