2013 Husaberg TE300 Torque Specs: Two-Stroke Enduro Fastener Values
Shop parts for a 2013 Husaberg TE300 Dirt Bike.
The 2013 Husaberg TE300 is a 293cc two-stroke enduro machine that combines the TE chassis with an engine producing broad, accessible power across the rev range. Popular among enduro veterans who prefer the light weight and controllable powerband of a big-bore two-stroke over a heavier four-stroke alternative, the TE300 requires attentive fastener maintenance to deliver consistent performance through a demanding competition season.
Engine Fastener Reference
Two-stroke power valve hardware is a unique engine fastener consideration compared to four-strokes. The power valve assembly and its fasteners must be secure for correct powerband delivery—inspect and verify power valve housing hardware whenever the cylinder is removed for service.
| Fastener | Torque (ft-lb) | Torque (Nm) |
|---|---|---|
| Spark plug | 18–22 | 24–30 |
| Cylinder head bolts | 22–26 | 30–35 |
| Cylinder base bolts | 18–22 | 24–30 |
| Flywheel nut | 36–43 | 49–58 |
| Clutch hub nut | 36–43 | 49–58 |
Chassis & Suspension
The 2013 TE300's chassis pivot hardware specifications are consistent with 2012. Linkage and swingarm bearings should be serviced at every major interval—the high-frequency vibration of the two-stroke engine transmits more energy into the chassis than a comparable four-stroke, accelerating bearing wear in pivot points that are already heavily loaded.
| Fastener | Torque (ft-lb) | Torque (Nm) |
|---|---|---|
| Fork clamp bolts — upper triple clamp | 11–15 | 15–20 |
| Fork clamp bolts — lower triple clamp | 15–19 | 20–26 |
| Handlebar clamp bolts | 18–22 | 24–30 |
| Swingarm pivot bolt | 54–61 | 73–83 |
| Rear shock upper mount | 29–36 | 39–49 |
| Rear shock lower mount | 29–36 | 39–49 |
| Shock linkage bolts | 29–36 | 39–49 |
Wheels, Brakes & Drivetrain
Chain and sprocket service on the 2013 TE300 should follow a more aggressive schedule than a four-stroke equivalent, given the higher instantaneous torque peaks from the two-stroke power delivery. Thread locker on sprocket bolts and disc fasteners is standard procedure at every assembly.
| Fastener | Torque (ft-lb) | Torque (Nm) |
|---|---|---|
| Front axle nut | 36–43 | 49–58 |
| Rear axle nut | 47–54 | 64–73 |
| Rear sprocket bolts | 22–29 | 30–39 |
| Chain adjuster lock nuts | 18–22 | 24–30 |
| Front caliper mounting bolts | 18–22 | 24–30 |
| Front brake disc bolts | 14–17 | 19–23 |
| Rear caliper mounting bolts | 18–22 | 24–30 |
| Rear brake disc bolts | 14–17 | 19–23 |
Related Shopping Categories
Shop Torque Wrenches for a 2013 Husaberg TE300 Dirt Bike.
Shop Wrenches and Sockets for a 2013 Husaberg TE300 Dirt Bike.
Shop Thread Locker for a 2013 Husaberg TE300 Dirt Bike.
Shop Additional Tools for a 2013 Husaberg TE300 Dirt Bike.
Shop Penetrating Oil for a 2013 Husaberg TE300 Dirt Bike.
Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.
