Begin typing to search, when autocomplete results are available use up and down arrows to review and enter to select. Selecting an options will take you to a new page. Touch device users, explore by touch.SEARCH
Search within a riding style, select an optionBegin typing to search, when autocomplete results are available use up and down arrows to review and enter to select. Selecting an options will take you to a new page. Touch device users, explore by touch.
Free shipping on orders over $79 to Illinois
Orders over $79.00 will receive free shipping. This is a residential delivery service, deliveries Monday through Friday from 9:00am to 8:00pm.
How do I choose the right brake master cylinder for a utility ATV/UTV or motorcycle?
Prioritize bore size, lever/pedal ratio, caliper piston compatibility, outlet/push‑rod thread types, and whether residual pressure is needed; then match to your vehicle type and terrain for the desired pressure, feel, and balance. Verify the product specs against your caliper piston sizes and your machine’s setup.
How does bore size change braking feel on utility rides?
Smaller bores increase line pressure and reduce lever effort for quick bite on loose surfaces, while larger bores move more fluid for a firmer pedal and shorter travel. If you add calipers or larger pistons, revisit bore size to keep front/rear balance and avoid a spongy feel.
What should I know about lever/pedal ratio with a new master cylinder?
Use a moderate ratio that delivers full braking without excessive travel, and keep the push rod nearly in-line to avoid binding. After install, confirm pads engage well before the end of lever/pedal stroke.
Do I need a residual pressure valve?
Use higher residual pressure with drum brakes or calipers that mechanically retract, a light residual when the caliper sits at or above the master to prevent backflow, and none with seal‑deflection calipers. Match the valve style to your system’s configuration and terrain demands.
What fittings and hose details should I check before ordering?
Confirm outlet thread type and seat style (concave vs. washer‑sealed), push‑rod thread style, and that your hose/pipe size and adapters match the cylinder. Choose corrosion‑resistant materials and ensure hose routing allows free suspension and steering movement.