How to Change the Oil in a 2016 Can-Am Outlander 570 DPS

Maintaining your 2016 Can-Am Outlander 570 DPS is crucial for optimal performance and longevity. One of the most important maintenance tasks is changing the oil. Regular oil changes ensure that your engine runs smoothly and efficiently. Before you start, make sure you have the necessary tools and supplies: a new oil filter, the correct type of oil, a wrench, an oil catch pan, and a funnel.

Shop parts for a 2016 Can-Am Outlander 570 DPS ATV.

Step-by-Step Guide to Changing the Oil

  1. Warm Up the Engine: Start your ATV and let it run for a few minutes. This helps the oil to flow out smoothly when you drain it.
  2. Position the ATV: Ensure your ATV is on a level surface and turn off the engine. This will prevent any accidental movement and ensure all the oil drains out.
  3. Remove the Drain Plug: Place the oil catch pan under the engine. Use a wrench to remove the drain plug and let the old oil drain completely.
  4. Replace the Oil Filter: Remove the old oil filter using an oil filter wrench. Before installing the new filter, apply a little oil to the rubber seal to ensure a good fit. Screw the new filter in place.
  5. Reinstall the Drain Plug: Once all the oil has drained, reinstall the drain plug securely.
  6. Add New Oil: Use a funnel to pour the new oil into the engine. Refer to your owner's manual for the correct oil type and capacity.
  7. Check Oil Level: Start the engine and let it run for a minute. Turn it off and check the oil level with the dipstick. Add more oil if necessary.
  8. Dispose of Old Oil: Take the old oil to a recycling center or an auto shop that disposes of oil properly.

Important Notes for the 2016 Can-Am Outlander 570 DPS

The 2016 Can-Am Outlander 570 DPS is equipped with a Rotax V-Twin engine, known for its reliability and power. When changing the oil, it's important to use the recommended oil type to maintain engine performance. Additionally, regularly check the air filter and coolant levels to ensure your ATV runs smoothly. The Dynamic Power Steering (DPS) system on this model provides excellent handling, so keeping up with regular maintenance will ensure it continues to perform at its best.

By following these steps, you can keep your 2016 Can-Am Outlander 570 DPS in top condition. Regular maintenance not only extends the life of your ATV but also enhances your riding experience.

Related Shopping Categories

Shop Motor Oil for a 2016 Can-Am Outlander 570 DPS ATV.

Shop Oil Filters for a 2016 Can-Am Outlander 570 DPS ATV.

Shop Oil Drain Pans for a 2016 Can-Am Outlander 570 DPS ATV.

Shop Tools for a 2016 Can-Am Outlander 570 DPS ATV.

Shop Oil Fillers and Drain Plugs for a 2016 Can-Am Outlander 570 DPS ATV.

Disclaimer: This guide is provided for general informational purposes only and is not intended to replace your motorcycle's official owner's manual. Always refer to your manufacturer's documentation for model-specific instructions, torque specifications, safety procedures, and maintenance requirements. If you are unsure or inexperienced, consider seeking assistance from a qualified mechanic or technician.