All KTM CNC-machined triple clamps have the following properties:
- Elegant anodized surface.
- Visual highlight.
- CNC milled aluminum triple clamp.
- Optimally tuned steering stem stiffness.
- 100% alignment of the fork tubes.
- Ideal flexibility - precisely customised to the WP fork.
- Specially optimized geometry of the fork clamping.
- No ovalization of the fork outer tube.
- Highly precise and smooth fork response.
- Maximum handling gain.
- Gain in stability at the front wheel.
- Overall, more homogeneous force flows in the entire vehicle.
- Including steering stem with steering head bearing already pressed on.
The factory triple clamp has the additional benefits of:
- Fork clamping area machined after anodizing: With the same tightening torque,this increases the friction between triple clamp and fork tubes, and helps to prevent the fork tubes from twisting in the triple clamp.
- The special steering stem bracket provides additional support for this feature.
The triple clamp offset is the distance between the horizontal center line of both fork tubes and the center of the steering axis, by which the fork tubes are offset from the steering axis (referred to as dimension "X").
Offset setting options:
- Shorter offset: stability on fast straights.
- Longer offset: simpler and swifter steering into corners.
KTM PowerParts P/N: 470.01.099.020/04.
