Mike 3 months 21 days ago Location: Perth WA, Australia
Mount Kit suitability for KXF?
Can you please advise if the mount kit is suitable for the Kawasaki KXF bikes? From the Works Connection website it appears that the mount kit for the Kawasaki has a different part number as it contains a spacer washer and longer tank mounting bolt?
3 months 20 days ago Location: Florida, USA
I mounted mine on a 2005 KX 250. It used the same (stock) bolt for the top tank mount. (by the triple tree) I cant remember if I did or didn't reuse the washer and used the mount as the washer instead. I will have to look at it again.
I hope this helps. Dewy002 in FLA.
Top 50 Contributor 3 months 20 days ago Location: Tuscaloosa, AL
I bought this meter from MotoSport for my 2009 KX250F and it fit perfectly. You need to get the one that comes with the mounting bracket. You remove the bolt that holds your tank in place then put that bolt through the bracket and back into your tank. The other screws mount the meter to the bracket. I don't think the KXF design has changed so you should be good to go.
MotoSport Staff Expert 3 months 20 days ago Location: Portland, OR, USA
Yes. This kit would work perfect for your 2011 KX250F. The mount kit simply installs where your tank bolts up right behind the next of the frame. It is a very clean set up and allows you to easily see the hour/tach reading on your bike.
2 months 28 days ago Location: Oxford, MS, USA
Yes, I understand that there is a different spacer size, but thats a preference (the spacer that came with the kit above, required longer tank bolts to fit correctly. I believe I just installed without the long spacer, but still used the bolts in the kit. I received the kit, and installed it on my 2013 kx250f. Here's a pic!