For a limited time, MotoSport.com has TRIPLED the Fast Cash awarded for the purchase of this item from $15 to $45! Take advantage of this extraordinary offer while supplies last!
With a look and style reminiscent of the flowing lanes of a super highway, the Freeway graphic will definitely keep riders moving through most riding conditions, even if traffic is stopped.
The EXO-T1200 is the first helmet model to join Scorpion's new T-Series, designed with premium features to meet the needs of hardcore or leisure touring riders. The profile is aerodynamic and aggressive, while advanced features like the TCT composite shell, AirFit liner inflation system, 3-Step SpeedView drop down sun visor and VSV ventilation system enhance any type of riding experience.
TCT Composite Shell: Developed exclusively by Scorpion, the revolutionary TCT (Thermodynamic Composite Technology) process consists of a proprietary five-layer blend of interlaced and specially formulated fiberglass, Aramid and organic poly-resin fibers.
AirFit Liner Inflation System: Inflatable cheek pad system for a superior, personalized fit.
Everclear No Fog Face Shield: Optically-clear shield with state-of-the art fog-free technology, anti-scratch hardened coating and 100% UV protection.
Ellip-Tec Base Plate: Scorpion's ratchet system uses an elliptical motion that creates 7.6 mm of travel which pulls the shield securely against the eyeport, ensuring a proper seal. The Ellip-Tec ratchet system allows for 100% tool-less shield changing in a matter of seconds.
3-Step SpeedView Retractable Sun-Visor: Adjustable to 3 positions, the retractable sun-visor incorporates Everclear anti-fog technology on both sides.
KwikWick 3 Anti-Microbial Liner: The third generation of Scorpion's moisture-wicking lining material feels cool to the touch in warm weather and warm in cool weather while maintaining anti-microbial and hypo-allergenic properties.
Contour Cheek Pads: Three-dimensionally sculpted foam that contours the rider's head shape for better comfort and fit.
KwikFit Cheek Pads: KwikFit cheekpads allow easy on and off of the most common styles of eye glasses.
Emergency Release System: Tabs located under the neck roll allow easy removal of the cheek pads by trained emergency medical personnel.
VSV (Venturi Super Vent) Ventilation System: Scorpion's innovative VSV (Venturi Super Vent) System was specially designed and wind-tunnel tested to increase the venturi effect, a creation of negative air pressure. The two intake ports both serve a separate function, the first draws cool air into the helmet interior while the second draws cool air across the three exhaust ports. As the second intake port passes air through the graduated Super Vent air channel, it accelerates the flow of air over the three exhaust ports, thus increasing the venturi effect which will draw more warm air out of the helmet interior.
Three Shell Sizes: Having three shell sizes helps to optimize weight, fit and comfort across the entire size range of XS - 2XL.
Communication system speaker pockets.
Double D-ring chin strap.
Five year warranty.
Note: Sold with clear faceshield, other shield options also available and sold separately.
1. Measure your head size. To do this, pass a tape measure horizontally around your head at a height of about one inch above your eye- brows. When done properly, you will have measured the largest part of your head.
2. Check your measurement with the helmet sizing chart and select the closest size. As the helmet may not always meet your head size exactly, and your head measurement may fall between two sizes, first try the smaller size.
WHEN YOU RECEIVE YOUR HELMET
1. Expand the helmet opening by pulling outwards on each chinstrap, and slide your head into the helmet. If you are unfamiliar with helmets you may be reluctant to pull the helmet down, as it may feel too tight. Even if the helmet is difficult to put on, please use the smallest helmet possible. The helmet should feel snug. If the helmet is not tight, it is too big for you. New helmets will break in and loosen slightly over time.
2. Once the helmet is on:
Check that the helmet inner lining fits snugly all around your head.
Check that the top pad presses on the top of your head.
Check that the cheek pads press up against your cheeks. When you open and close your mouth, you should drag your teeth along the inside of your cheeks.
Check to make sure that you cannot easily slide your finger into the helmet along the side of your temple.
Hold the helmet with one hand on each side. Without moving your head, try to move the helmet up and down, and side to side. You should feel the skin of your head and face being pulled as you try to move the helmet. If you can move the helmet around easily, it is too big. Try a smaller size. Please note that during this check, the chinstraps should be properly fastened.