RENTHAL TWINWALL HANDLEBARS - OVERSIZED 1-1/8
[+] Enlarge

More images:

  • Renthal Twin Wall Handlebars benefit from immense strength, resilience & are virtually guarantee dagainst fatigue failure due to their design. Renthal Twin Wall Handlebars are essentially two bars in one and Renthal's over engineering means they could be the last set of bars you buy for your bike.
  • Unlikely to bend except in severe crashes.
  • Specifically designed for MX & Supercross.
  • 1-1/8" (28.6mm) diameter, double-walled aluminum alloy handlebar.
  • Note: Renthal Twin Wall handlebars require the use of 1-1/8" handlebar clamps.

RENTHAL TWINWALL HANDLEBARS - OVERSIZED 1-1/8"

Our Price: $99.99
Retail:$119.99
You Save:$20.00 (17%)
Please make your selections below to view availability
Bend
Show RENTHAL TWINWALL HANDLEBARS - OVERSIZED 1-1/8
Show RENTHAL TWINWALL HANDLEBARS - OVERSIZED 1-1/8
RENTHAL TWINWALL HANDLEBARS - OVERSIZED 1-1/8   Qualifies for FREE 3-Day Express Shipping!
Quantity:
Please select a product from the options above.

You May Also Need...

RENTHAL GRIP DONUTS
RENTHAL GRIP DONUTS
Price: $2.99

RENTHAL GRIPS - TWIST THROTTLE
RENTHAL GRIPS - TWIST THROTTLE
Price: $12.99

RENTHAL DUAL COMPOUND GRIPS - TWIST THROTTLE
RENTHAL DUAL COMPOUND GRIPS - TWIST THROTTLE
Price: $15.99

RENTHAL GRIP GLUE
RENTHAL GRIP GLUE
Price: $8.99


Availability In Stock
Overall:
1 out of 5
1 out of 5
Location: Oklahoma
Weak bars
" Installed these bars and enjoyed them from the start. I have ran them in the past on my 11' CRF450R and loved them up until the first time you lay it down and find out how easily they bend. I bought another set and the very same thing happened AGAIN. I would only recommend these bars to someone who needs a tax deduction or someone that never has an incident. The non-crossbar version may be a little more forgiving but these certainly are not... "
Overall:
5 out of 5
5 out of 5
Location: Bismarck, ND
Amazingly Durable
" I have litteraly taken these bars to the center of the earth and back! I've done more bangs, crashes, and dings than i can count to these bars and they are just as good as ever! Don' buy cheap bars! you'll get what you pay for. "
Overall:
5 out of 5
5 out of 5
Location: Not Available
Don't know why I....
" Best bars I ever ran. Don't understand why I would have ever bought anything else. "
Overall:
5 out of 5
5 out of 5
Location: everett, wa
best bars ever.
" I have tried many bars, easton, pro taper, and the renthal twin wall are always the best. I like the firm and precise fit and feel they offer. I also love the Carmichal bend. I will keep using these always. "
Overall:
5 out of 5
5 out of 5
Location: Grand Rapids, MI
Renthal Twinwall`
" I used to use Renthal, then went to Pro Taper and now back to Renthal haha. These bars are the most comfortable bar I have use so far. These bars eliminate vibration well and do not bend at all in a crash. Really glad I got these and coupled with Renthal Kevlar grips your hands are in heaven. "
Overall:
5 out of 5
5 out of 5
Location: Dunkerton, Iowa
AWESOME
" very nice bars look great stronger then ever and best part if u bend them send em in "
Overall:
5 out of 5
5 out of 5
Location: birmingham,al
If you are a tall rider, these are a MUST!!!!
" I was kinda nervous about ordering these bars, but after i received them i fell in love with them. If you are a taller rider like me 6`2 you should try the windham bend it is perfect for me, and as far as the bar strength i dont think they will ever bend. these are some amazing bars!!!! "
Overall:
5 out of 5
5 out of 5
Location: Michigan
Best Bars Available
" Ive been racing for 18 years and renthals are by far the best bars ive ridden. The twinwalls are super strong and look very good. Im 6'7'' and the rc high bars are definetly the way to go for taller riders. Dont forget you need 1 1/8" mounts aswell. Its much easier to reset your rubber mounts on your tripple clamps then to buy another set of bars and install them. Spend the extra and get the best! "
Overall:
5 out of 5
5 out of 5
Location: blairsville, PA
best bars ever
" i have the red ones on my crf250r and have hit the ground pretty hard a few times and never even moved em. i highly recomend these to anyone who ones a dirt bike "
Overall:
5 out of 5
5 out of 5
Location: Watkinsville, Ga
Buy before you snap your bars.
" Renthal came out with these amazing TwinWall bars and are I think stronger than ProTaper Evo's. You would have to drop your bike off a building just to bend the bars( Please don't attempt that!). It's worth the $100! Avery348 "
Overall:
5 out of 5
5 out of 5
Location: Ocala, FL
Can't tweak...
" These bars are durable and stylish. You can get a color to match your bike which is awesome. Also they don't bend everytime you hit the deck which everybody does. They aren't as forgiving and flexible as bars without a crossbar but its worth it for the strength. "
Overall:
5 out of 5
5 out of 5
Location: Topeka, KS
Dont Buy Cheap Bars, Buy Twinwall!
" I use to buy cheap bars that just "got me by" for the time being. I had it all wrong. These bars are awesome! I have not bent them one time in years of racing and riding. I put these on all of my bikes. Best bars for the buck. Only thing is, if you want hand guards, its a tight fit but it works. "
Overall:
5 out of 5
5 out of 5
Location: NEPA
" i bought these bars after i twisted my stock bars and i have crashed and burned a couple of time and there still unbent the only problem i have is that i keep bending the bolts to the clamps love these bars and if i have to ill deff. buy another pair. "
Overall:
5 out of 5
5 out of 5
Location: Jacksonville, FL
Nothing compares
" These bars continue to amaze me. My son has had more than his fair share of nasty spills and these bars continue to hold up. I just loosen the cross bar, they pop back straight and I re-tighten the cross bar. We've tried others in the past and they don't hold up like Renthals. These are the only bars for me. "
Overall:
5 out of 5
5 out of 5
Location: indianapolis, in
great bars
" i do some freestyle and motox and it took alot of wrecks to hurt these bars, but i did manage to snap it into 2 pieces, it broke right where it tapers down to 7/8th, i had a really hard hit after flyin 60 feet in the air, i broke my left kneecap and the bar got jamed into my chin, 32 stitches and a broken leg later and i would still use these bars, theyre real strong "
Overall:
2 out of 5
2 out of 5
Location: Burlington, WA.
Doesn't fit 07' TRX 400 EX
" Nice bars, but there isn't enough room for the throttle box and brake control unless you want to mod them. More of a dirt bike bar..not for Hondas "
Overall:
5 out of 5
5 out of 5
Location: Eureka, CA
extremely good!
" i put a pair of these bars on my 04 kx 250f and havent regreted it since. these bars are fantastic. "
Overall:
5 out of 5
5 out of 5
Location: surprise,AZ
best overall
" this is the best and strongest bar i have ever had. i had flipped my quad and they still didnt bend great product "
Overall:
5 out of 5
5 out of 5
Location: Prairie City, OR
Great Bars
" I put these bars on my 2005 RMZ 250 and they worked great. by far the best bars ive ever owned. i took some very hard crashes with these and then never did bend. i went with the carmicheal bend which was great for me. the only downfall is you have to have oversized clamps. but its worth it "
Overall:
4 out of 5
4 out of 5
Location: Sindney Ohio
on a z400
" I bought the bar & Clamp combo for my 03 LTZ400 they are really nice but if you want to keep the stock Starter button I would not recommend these... The point from where they taper back down to 7/8 is not enough room to fit all the stock controls... I put a kill switch as my starter button so it didn't matter to me. "
Overall:
4 out of 5
4 out of 5
Location: roseburg, or.
super strong
" i like the twinwalls with the crossbar removed. it adds a little flex and the bar is plenty strong enough. or if you want you can cut the crossbar in the middle and still use the normal pad to cover it so the bar will flex more. i just use the fatbar pad. "
Overall:
5 out of 5
5 out of 5
Location: cumming
best
" would never buy another kind of bar, it never bent when i crashed or laid down the bike. highly recromend them to another person best ever, they also look cool too "
Overall:
5 out of 5
5 out of 5
Location: Houma, LA
very tough
" great handle bars that you could buy for the price, they are very durable even through some of the hardest falls, i would recomend these handle bars to anyone! "
Overall:
5 out of 5
5 out of 5
Location: Chatham VA
GRATE BARS
" i got these bars because i thought they would be long lasting and strong, witch they are, i wrecked my bike off a 90 foot table top and landed on my bars (cost a broken wrist) and they are still fine, but my clamps are bent. i still use the same pare of twin walls. grate product! "
Overall:
5 out of 5
5 out of 5
Location: katy, tx
such a thing called too strong?
" i crashed really hard, and i mean REALLY hard. bike was flipping and so was i. my bar moutnts needed re-ajustment and my forks needed to be bent back. but my renthals are still straight as an arrow. not an inch of bend, still perfect. "
Overall:
5 out of 5
5 out of 5
Location: Pittsburgh, PA
I'd buy them again, but I won't need to!
" One day, riding at a track (new track to me) I saw this double. I said to myself, "Hey, I want to jump that double". So, I tried it. It was maybe a 20-25' double, not huge. With my stock 7/8" renthals, I tried this jump. I didn't case the jump, but the back wheel was a little further back than it should have been. What's next? SNAP. The left side of my Renthals just snapped like an old stick that's been laying around for years. I was very fortunate, and I was able to react quickly without falling (I don't know how I managed to do that). Had I not reacted so quick, I could have EASILY shredded the inside of my entire left forearm on the jagged edges of the Renthal. So I bought another Renthal 7/8" bar to get me through the rest of that day, then I went home and ordered a pair of these bars. No problems yet! I've crashed, jumped, cased, near endo'ed, and the bars are still holding up, no signs of wear. If you plan on keeping your bike (and forearms) for a while, I strongly suggest these bars. "
Overall:
5 out of 5
5 out of 5
Location: Decatur, IL
Great Bars
" Happy with the bend I chose. Black bars look good. Haven't crashed with them, don't know how well they resist bending. "
Overall:
5 out of 5
5 out of 5
Location: Not Available
Excellent Strenght and Look Great
" These bars and highly recommended. Replacing bent bars is no longer something I have to do anymore. These bars can take it all! "
Overall:
5 out of 5
5 out of 5
Location: Arizona
Twinwall or 7/8". Get the twinwalls
" These bars are very strong and by far the best I have owned. If you are running a bar mounted steering damper, it will not fit under standard crossbar. They do offer one with a bent crossbar. "
Overall:
5 out of 5
5 out of 5
Location: Western, NC
Cant miss here
" Super product, looks great, performs as expected, tough as nails and lasts and lasts, all bikes should have these installed from the factory. Take the time to find the bend profile you like, put them on and forget about it, they will not fail you! "
Overall:
5 out of 5
5 out of 5
Location: Tulare, Ca.
POSITVE FEEL!
" I LIKE THE POSITIVE FEEL OF THE TWIN WALLS. VERY COMFORTABLE FOR DESERT OR MOTOCROSS. "
Overall:
5 out of 5
5 out of 5
Location: Coatesville, PA
" If you are looking for a set of bars that look cool and are the longest lasting these are the bars to purchase. These bars seem like they are unbendable. "
Overall:
5 out of 5
5 out of 5
Location: Not Available
" they are great bars and i would highly recomend them. "
Overall:
5 out of 5
5 out of 5
Location: Scappoose, OR
DURABLE
" Only bars to go with, they are durable and look very good! "
Overall:
5 out of 5
5 out of 5
Location: San Antonio, TX
One bar to rule them all!
" Easy to install and center on clamps. Sick anodizing adds some stylish points. Ever had problems dumping your bike and bending bars weekly. These bars don't bend easily. Twin wall bars are the sturdiest and very durable. Riding with out the twin walls is a mistake plain and simple. "
Overall:
5 out of 5
5 out of 5
Location: Illinois
Great Bars
" These are a great choice for any type of dirtbike riding. I have used them for racing and had no problems with bending. I have gone trail riding and slammed a tree and these bars held up just fine. Excellent handlebars. "
Overall:
5 out of 5
5 out of 5
Location: madbury NH
best bars out there
" the renthal twin walls are the strongest bars out there. i have had my bars for over 3 years. there are still in the best of shape and i have hit the ground hard. they are by far the best bars out there. "
Overall:
5 out of 5
5 out of 5
Location: md
Strongest bars
" This is probably the toughest bar made. I have run it on almost all my bikes, and have never had a problem. With all the different variety of bends available, there is a fit for everybody. They also take a lot of vibration out of the front end. The only issue that I have heard of, but never encountered was that the bars are so strong, that in a crash, the bar mount in the triple clamp bent. These dont cost much anyway, so it really isnt worth worrying about. "
Overall:
5 out of 5
5 out of 5
Location: East Quogue, NY
Nice bars
" Good looking, a variety of bends, stong as heck, never bent a pair yet. "
Overall:
5 out of 5
5 out of 5
Location: Springfield,Or
SOLID!!!!
" These bars have to be the tuffest out there. I clipped a telphone pole at 40, and the bars where still straight.. "
Overall:
5 out of 5
5 out of 5
Location: pekin,il
best bars out
" these are the best bars out right now. ive bent 7/8s 3 pairs in 2 years. but since ive bought these bars ive never had any problems excellent bars. highly recommended "
Overall:
5 out of 5
5 out of 5
Location: PEORIA, AZ
EVERLASTING
" I HAVE RUN THESE BARS ON EVERYBIKE I HAVE EVER HAD...NEVER HAD A PROBLEM "
Overall:
5 out of 5
5 out of 5
Location: michigan
one beast of a bar
" i have had these on 2 of my bikes, and ive taken some really hard falls where the bike always falls alot harder than me, and these bars just wont bend... "
Overall:
5 out of 5
5 out of 5
Location: Rockford, MI
great buy
" Great bars, very good price. Look great and preform awsome. "
Overall:
5 out of 5
5 out of 5
Location: Salem, OR
Renthal Twin Wall Bars
" These bars are STRONG! I upgraded after bending my second set of 7/8ths in as many weekends. I am a taller rider so I went with the CR HIGH bend, they make it much more comfortable to stand and not have to awkwardly be hunched over. I've had one big crash where I clipped a fur tree with the bars. Picked the bike back up and they weren't even tweaked at all. I dont know if they advertise this but I feel less vibration with the new bars than I did with the 7/8th's. Definately worth the money. "
Overall:
5 out of 5
5 out of 5
Location: PA
These Handlebars are a Must
" I have gone through more 7/8 handlebars than I would like to remember. Thank goodness for these oversize bars. These bars have taken quite a bit of abuse and have not bent for this entire racing season. At first I did not want to pay the extra (with new bar mount expense too), but believe me they are worth it! "
Overall:
5 out of 5
5 out of 5
Location: PDX
Excellent Bars!
" These bars and the strongest I've used by far. I was tired of bending bars with minor falls and these were recommended to me. Great fit on my KTM 450SXF. "
Overall:
5 out of 5
5 out of 5
Location: MA
Best bar I've owned
" These twinwalls are tough and great looking. I love this bar. "
Overall:
5 out of 5
5 out of 5
Location: trafford,PA
great handlebars
" I had the pro taper contour bars but after buying these ill probably never buy pro taper again. I have the RC bars and they really allow for a more agressive riding style. "
Overall:
5 out of 5
5 out of 5
Location: Fox River Grove, IL
The perfect bars
" I have no complaints at all about these bars. Crash tested plenty of times and still perfectly straight. Highly recommended. "
Overall:
5 out of 5
5 out of 5
Location: Port Angeles, WA
perfect!
" I bent my handle bars in a race one day, and last minute, went out and got these, i crashed again, and they diddnt bend one bit! "
Overall:
5 out of 5
5 out of 5
Location: Atascadero, Ca
Amazing Bars
" I love these things! Amazing feel and durability, wont ever change bars again!! "
Overall:
5 out of 5
5 out of 5
Location: casey, IL
Best bars ever
" i got these bars middle of the season and have had no trouble with them no bending and also reduced arm pump "
Overall:
5 out of 5
5 out of 5
Location: PRESCOTT, AZ
BEST BARS MADE
" I HAVE PERSONALLY CRASH TESTED SEVERAL PAIRS OF THE RENTHAL TWINWALLS AND CAN TELL YOU NO OTHER BAR COULD HOLD UP TO THE STRESSES THESE BARS CAN "
Overall:
5 out of 5
5 out of 5
Location: richmond, virginia
I would buy these handle bars again
" These handlebars are perfect. I have been in several serious wrecks and these handlebars are still in perfect condition. They have not bent yet and i dont think they will for a long time. "
Overall:
5 out of 5
5 out of 5
Location: New York,NY
perfect!
" I used it for 5 years...i tried so hard to bend it with a lot of crashes but i couldn't......!!!! "
size
I have a 2005 drz 110 could i use these bars with stock mounts and whats the highest bars
Asked by mxdude
no. these are oversized bars. you have 7/8 mounts.
Answered by dirt
can you take the renthal padded thinggy off becuase on my atv that is were the key goes and were the neutral and reverese light things are.
Asked by motofreaka
the bar pad is removable. I don't recommend removing the cross-bar if thats what you mean by thingy.
Answered by james718
yes you can remove the pad all it is velco
Answered by rmRideR250, NEPA
do you have to order oversized pieces for it
Asked by jhmcclinon
Yes, you would have to buy the oversized mounts since these are 1 1/8th bars, unless you have them already then your golden.
Answered by Drewski, Portland, OR
Do these bars work with stabilizer?
Asked by , rhode island
iam not sure if it will fit under the brace but i think the sell custom braces that are bent to fit. if not you can remove the brace. its not needed. the owners manual says that the brace is not needed.
Answered by jake9969
you will need the bent crossbar to run that setup
Answered by rmRideR250, NEPA
I recently purchased a set of twinwalls . My question is do they come any taller like the stock height of the banshee bars?
Asked by notlate4supper
you can check the measurements on the renthal website. if not add a riser.
Answered by jake9969
turner makes a set of risers you can buy and they will fit your stock mounts i beleive they make them in 3 different heights.
Answered by rmRideR250, NEPA
Which bend??
Asked by MXHI, HONOLULU, HI
The stock bar on that bike was the Fatbars in the Suzuki RM Bend, the closest thing in a twin wall would be the Windham or the Stewart Bend.. Both of the bends are a little bit taller and wider though compared to what came stock.
Answered by Drewski, Portland, OR
How do you determine the bend for 04 CR125
Asked by motophoto
The part number for the bars should be stamped on the bars themselves, normally in the middle of the bar between your bar mounts. The stock bend on that bike was the Honda CR bend which is Renthal part number 971-08.
Answered by Drewski, Portland, OR
CR 125 bend
Asked by Strehlebear
Honda used the Renthal 971 bend (Carmichael/Windham). Hope that helps.
Answered by james718
Do that come with the mounts?
Asked by Belcher218
No, bar mounts are sold separately.
Answered by Drewski, Portland, OR
no they dont not come with the mounts (big bummer)
Answered by rmRideR250, NEPA
Renthal 722 Bend
Asked by 2Smoker, mooresville, nc
The Renthal 722 bend is the CR High bend. I hope that helps.
Answered by james718
What is the best ATV bend
Asked by ATVRider21, Oregon
The stock bars on your machine are 89mm tall. The tallest Twin Wall we have is the RC High bend at 119mm (about 3/4"). The next tallest would be the Carmichael bend at 99mm
Answered by BOB3
I have an 03 Ltz 400 I went with the CR hi bend and its perfect
Answered by chadp71, Sindney Ohio
Bend for KLX450R
Asked by Leo1, PLacerville Ca
According to renthals website it would be the Carmichael bend. http://www.renthal.com/File/fit_my_bike_process.asp?zone=USA&biketype=Off%20Road&manufacturer=KAWASAKI&model=KLX%20450R&bikedate=2008
Answered by racer3114, PDX
what bend for a xr70
Asked by tyler166, lemitar, NM
We don't have a handlebar in the Renthal Twinwall's that would be close to stock on an XR70.
Answered by james718, Portland, OR
does the renthal pad come with the bars?
Asked by 33christopher
Bar pads are included with these bars.
Answered by james718, Portland, OR
yes the pad is included with the bars
Answered by rmRideR250, NEPA
What is the best bend for Double wall Renthal bars for a yfz 450
Asked by coolkid61
closest in the twin walls would be the Carmichael bend which is 6mm lower, 18mm wider and have 32mm less pullback or the Carmichael highs (RC High) which would 14mm taller than stock.
Answered by JesseC, Tualatin
A 2008 KTM 144 has the Renthal 996 bend, which of these choices is closet or the same as the 996 bend?
Asked by DV573, Thomasville, NC
The Renthal 996 bend is the Twinwall Stewart bend. the dimensions of that bar is: width=805mm height=93mm Rise=50mm sweep (pullback)=55mm
Answered by james718, Portland, OR
What bend is the closest to a 2007 CRF250R stock handalbars?
Asked by jmoney6244
The Carmichael bend will be the same dimension.
Answered by james718, Portland, OR
What is the right bend for a stock 2008 crf150rb handle bars?
Asked by hunterjoe777
It depends on how you like your bars. Some bars are taller, wider, or have more pull back on them so it's kind of hard to make a suggestion because it depends on what makes you comfortable. Give one of our sales guys a call and tell them if you like a tall bar, wide bar, narrow and what not and they we will help you out.
Answered by Drewski, P+RTLAND
Whats the best handle bar fit for my 05 honda 300ex?
Asked by blackmagic
Handlebars are typically rider preference. I'd suggest putting a few different bends in your hands and see which feel the best to you.
Answered by james718, Portland, OR

MotoSport.com - The Guys That Ride!