Woodcraft three-piece split clip-on risers are specially designed to make installation and removal a snap. The three-piece design is race proven and makes it easy to service your clipons below the triple clamp without having to disassemble the entire front end.
- Special attention has also been taken to save weight wherever possible on these clamps.
- The bars themselves are available in both 12 and 13.5 inch lengths and are easily adjusted to whatever custom width you desire.
- Racers no longer have to worry about replacing an expensive complete clip-on assembly after a crash because these risers use an inexpensive universal handlebar.
- Having an adjustable bar angle that uses a standard bar is a difference that will make your riding experience better!
- These clip-ons have a 75 mm rise over a conventional race clip-on PLUS they have an adjustable bar angle between 2 and 12 degrees.
- This clip-on will give you the ability to have a race style clip-on assembly with the option to get the bars up higher for rider comfort.
- Different risers can be ordered in the future if you want a higher or lower setup.
- Notes: The 75 mm designation is not a rise over your stock clip-ons (since every stock clip-on is different). Please note that you will need to assess your motorcycle for both handlebar clearance and available cable / brake line length. This is a universal unit that is not model specific. Some additional work may be required for fitment.
