Woodcraft Clip-Ons

$154.99 - $189.99
$147.24 - $180.49
5.00 out of 5 stars
 
Woodcraft Clip-Ons
Woodcraft Clip-Ons
  • Description
  • Reviews (2)
  • Q&A (4)
  • Fitment

Woodcraft 2-piece split clip ons are specially designed to make installation and removal a snap. The 2-piece design is race proven and makes it easy to service your clip-ons below the triple clamp without having to disassemble the entire front end. Special attention has also been taken to save weight wherever possible. The bars are 12" long and are easily adjusted to whatever custom width you desire.

The forks on these bikes taper just below the triple clamp to a smaller diameter, leaving traditional 50 mm clip ons with a clamping area that is not wide enough to grab the entire clip-on. Unlike standard 50 mm clip ons, Woodcraft's stepped GSX-R clip-ons allow you keep stock ride height or to lower your front end and still be able to properly clamp the fork.

Note: 2003-2004 models do not allow full lock steering to the right with stock steering stops due to the throttle cables contacting the ram air tube. Racers need to either 1) build up the steering stops, 2) rotate your throttle tube couterclockwise or 3) adapt the top exit throttle housing.

  • Makes installation and removal a snap.
  • Race proven.
  • 50 / 49 mm.
  • 12" long bars which are easily adjusted to whatever custom width you desire.
  • Stepped design for forks on bikes which taper just below the triple clamp to a smaller diameter.
  • Sold in pairs.
5.0 out of 5 stars (2)
5.0 out of 5 stars
5 star   2
4 star 0
3 star 0
2 star 0
1 star 0
See Terms and Conditions
1-2 of 2
Overall 5 out of 5 stars
Location: SoCal
tcbikes
OEM Clip-On Replacement

Installation was easy and without any problems. One drill hole on each to facilitate the power button (R clip-on) and the blinker button (L clip-on). Recommend keeping everything lose until you find the sweet spot by fully sweeping the handlebars and checking for impacts. Brake resevoir even went on without a hitch using the OEM bracket (bend it a little- its aluminium).

Overall 5 out of 5 stars
Top 1000 Contributor
Location: citrus heights, CA
Kyusun
Great clip ons

These clip ons have been great! easy to install and after test riding, ajustments where easy to. They have a good solid control feel to them.I really liked all the height/riser options to choose from.

1-2 of 2
Total Questions (4)
Questions with answers:
  4
Questions without answers:
0
Allex Location: Duncan, BC, Canada
1-4 of 4
Allex 1 month 19 days ago Location: Duncan, BC, Canada
CBR 954 with Gilles triple clamps and Ohlins 50 mm R&T forks?
Can I get 1" or 1.5" rise clip-ons that will fit the 50 mm dia Ohlins fork?
MotoSport Staff Expert
1 month 19 days ago
MotoSportExpert
If the part is available through one of our suppliers, we would be happy to order it for you. Please contact one of our sales professionals to inquire about special orders and availability. Sport Motorcycle: 1-866-677-7338
Brane 1 year 11 months ago Location: Colorado
What preset woodcraft clip ons would be the best for a Cbr250ra?
Looking for an aggressive body positioning for my cbr250r on and off the track, which woodcraft preset should I purchase to not have any issues with clearance and such?
MotoSport Staff
1 year 11 months ago Location: Portland, OR, USA
MotoSportExpert
Woodcraft is only offering their clip-ons in one style for the CBR250R. They come with a built in 1" rise.
CamB 2 years 2 months ago
46mm?
The 46mm is that the diameter of the bar or the inside diameter of the clip?
MotoSport Staff
2 years 2 months ago Location: Portland, OR, USA
MotoSportExpert
46mm will be diameter of the clamp. These would be designed to clamp to forks that have a 46mm tube diameter.
Chriss 2 years 5 months ago
What is the outside diameter of this clip on thank you?
I need this mesure because im doing some fork cover and the outside diameter of my original clip on is too small to fits with fork clamp. Sorry for my bad english
MotoSport Staff
2 years 5 months ago Location: Portland, OR, USA
MotosportStaff
The outside diameter is 2.907" for the clamp portion of this Clip-On.
1-4 of 4