Turner Performance Products Fork Bleeder

Turner Performance Products Fork Bleeder
Turner Performance Products Fork Bleeder

$15.99 $18.99
16% Off - Save $3.00

Description See Also: 54 Reviews 6 Questions Fitment
Item #TNP000T

Read More
54 Reviews
4.1 out of 5 stars
5 Star   37 4 Star   7 3 Star   0 2 Star   3 1 Star   10
Write a Review

Write your review and you'll automatically be entered in our monthly drawing. Include an image or video to DOUBLE your chances to win!

Write Your Review Write a review to win $500
All Reviews
2008 klx450r

i like the product they seem great. but they DO NOT fit my klx450r there too big around to fit in the recessed machined fork cap the kawi has. they did work great on my kids 2003 yzf250f. so like product but unlike what wedsite says they dont fit klx450r.

rairold Verified Purchaser
Turner performance fork bleeder

I put these on a 2007 Kawasaki klx 300r and they fit good

S1234 Verified Purchaser
Cleveland, OH, USA
Bleeder valves

Product did not fit 2008DRZ 400 S.

Ajbfire Verified Purchaser
Grafton, MA, USA
Good replacement

Product replaces stock screw bleeder. No tools needed now to bleed my forks. Easy install.

Robert Verified Purchaser

These are great fork bleeders. I prefer these over the motion pro micro ones because they're more durable. I've had issue with the micro ones leaking and stripping the top because you have to use a screwdriver to tighten them. With these ones you can use a socket to tighten them so it's way easier.

Stunami Verified Purchaser
Bristol NH
Fork bleeder

As always m.s. But shipped immediately and arrived on time.word to the side they are delicate.... do not over tighten as I did . Now I got an extra if on breaks

Idonthaveanickname Verified Purchaser
Fort Walton Beach, FL, USA
Broke off

I'm not sure if it's because it's too close to the raised part of the fork or what, but the first one I put on broke in half. Luckly I used a hammer and a Philips screwdriver and made grooves to twist the thing out. I may have just got a bad batch. Not sure.

Turner Performance Products Fork Bleeder
Garrettweems Verified Purchaser
Morristown t
Great product for the $$!

These fork bleeders are very similar to the older style motion pro brand, motion pro has since changed the design of their for bleeders, therefor this is why I choose the turner brand. Never had any problems out of them and they look great as well

Jame Verified Purchaser
Does what it says easy install works great

Easy install works great kinda addicted to pushing them to relieve the air on my rm 250

Logan Verified Purchaser
Salem, OR, USA
06 CRF 250F

Easy installation, looks great.

Motoman Verified Purchaser
Zanesville, OH 43701, USA
Best Purchase Ever

Very good design and quality. Ordered the red color for a Honda and looks awesome.

Jordan Verified Purchaser
Easy to install

These have an 8 or 9 mil head on them that allows them to be installed in a tight spot with a wrench. I bough another set from another company and they were much more difficult to install because they have a notch in the top that you have to have direct access to with a screwdriver and have to move cables and stuff out of the way to install. If I buy more in the future they will be these.

Pops Verified Purchaser
Bixby, OK, USA
Front fork air bleeders

This product keeps your suspension working for you and takes away the harsh hits in rough track conditions!!!! Well worth the investment!!!

CRdude Verified Purchaser

Design is too tall, bars shifted and broke off in the shock. Had to drill it out. Sticking to stock bleeder bolts from here on. Also got in the way of the tie down straps during transport. Lasted 2 rides. Lame

450rides Verified Purchaser
Reno, NV, USA
Turner fork bleeder

The product is poorly made, it broke before seating on the top of the fork during installation.

I installed another product constructed of stainless steel which is much more durable and far more reliable.

Advmoto Verified Purchaser
Poor design

If you need to remove the bleeder and they are too tight to remove by hand, the lower housing unit will likely be destroyed with pliers trying to remove the unit. The manufacturer should design and manufacture the lower unit suitable for using an open end wrench (ie., 6 or 8mm wrench) for removal.

COtrailguy Verified Purchaser
Colorado, USA

Does what they should do and very easy to install. Good product and well worth the price.

Mike Verified Purchaser
Southwest Michigan
Why have I never heard of these before!

So much easier than removing a cross threaded bleeder screw from your fork.

13 450 xcf

They do not fit 2013 450 xcf's.

Dirtbug Top 25 Contributor Verified Purchaser
Edgewood, NM 87015, USA
Turner Fork Bleeder

This is a MUST have item on any cartridge type fork, air bleeding using the stock screw on the KTM EXC was a big PITA, so these bleeders were a must have item. The Turner bleeders are relatively inexpensive, well made, and installation a breeze.

See 20 More Reviews
6 Questions
Answered:   6
Not Yet:   0
Location: South Carolina
Q: Will these for a 1998 KX250?
1 year 1 month ago
MotoSport Staff Expert
1 year 1 month ago
A: Yes, Just be sure to correctly select the Year/Make/Model of your bike before ordering so we can be sure to send you the correct bleeders for your bike. Also, feel free to give us a call at 888-676-8853 and we would be happy to help you out with your order.
Q: Does this come with the wrench to install the bleeder?
Over 6 years ago
MotoSport Staff Expert
Over 6 years ago
A: no wrench in this one
Over 3 years ago
A: No, it doesn't. But you should just need a 8mm wrench. It's no biggie.
Top 1000 Contributor Top 500 Contributor
Over 3 years ago Location: Alberta, Canada
A: No they don't come with wrench. Use 8mm wrench to install.
Q: 19.99 for a pair or each?
Over 7 years ago
MotoSport Staff Expert
Over 7 years ago Location: Portland, OR
A: these are sold in pairs, one for each fork tube.
Over 7 years ago Location: natick
A: If you read the description is says it comes with two. I've seen these and they are very convenient and they work well.
Over 3 years ago
A: They come in pairs. So $19.99 for a pair of bleeders.
Top 500 Contributor Top 1000 Contributor
Over 3 years ago Location: Alberta, Canada
A: For the pair.
Location: Spokane
Q: How far out of the fork do these stick out?
Over 7 years ago
Far enough that I wont have to run a flag?
Over 7 years ago Location: bay area, ca
A: They stick up pretty far. I could even remount my bars.
Location: Killeen, Tx
Q: Are these available for any rides other than a KTM?
Over 8 years ago
MotoSport Staff
Over 8 years ago Location: Portland, OR
A: These bleeders are specific to the KTM's. if you are running any other bike you will need the Turner fork bleeders SHOWA/KAYABA
Top 25 Contributor
2 years 11 months ago Location: Edgewood, NM 87015, USA
A: Yes, but order them for your specific bike model/year.
Q: Are these sold singly or in pairs?
Over 8 years ago
MotoSport Staff Expert
Over 8 years ago
A: they are sold in pairs
Top 25 Contributor Top 50 Contributor
2 years 11 months ago Location: Edgewood, NM 87015, USA
A: They come as a pair.
2 years 9 months ago Location: Colorado, USA
A: These are sold as a pair.
Over 7 months ago Location: Grafton, MA, USA
A: Sold in pairs.
1-6 of 6
See all bikes that this part fits...
See Fitments