I have stock chain length 111 links + master (112) on my 08 yz250f. If you have a stock length chain you will have to use the completely flat side of the axle blocks. The other stepped up side won't allow you to have the correct slack 2"-2.4" per manual. I had to use the flat side in order to have slack. No biggie.
Turner Performance Products Axle Blocks
Write your review and you'll automatically be entered in our monthly drawing. Include an image or video to DOUBLE your chances to win!Write Your Review
Really effed up my stock axle blocks, installed these and boy do they really spice things up. Totally recommend even if you don't need em! Fit like a charm.
Great product, looks great with the my black rear sprocket,gives the bike a bit of bling.
Every rider loves adding some bling here and there, and these axle blocks have a great clean finish, fit perfectly, and are just as light, if not lighter, than the stock blocks. Nice inexpensive way to set your ride apart from others at the track.
Axle blocks look good in blue, match my YZ450F perfect! Perfect fit, we'll see how long they last?
Stockers were pretty beat up from riding over the years. These were priced the best and came in the color I was looking for. The fit and finish was good and the hash marks for chain adjustments were easy to read.
Okay product. But, Hammerhead is the way to go. The numbers on the Hammerhead blocks are way easier to read than counting lines.
Fit perfectly and looks great... What more could you ask for? Price was bada$$ at $15!!! Installed on a 05 YZ450F.
I did some research, and found that WR250F axle blocks fit a WR250X. These blocks were half the price of any others, and the quality is very good. I used the lines to adjust my chain, then tested with a tape, and sighted down the chain, they seem to be accurate.I wanted aftermarket blocks to run a longer chain for future gearing changes. The ONLY thing I would have liked better was a deeper red anodizing, it is just a little light. I would buy these again.
These blocks are great.....they look good and work great.....
Quality seems pretty good. Went to install and they fit really tight on my bike (2005 KX125). So tight that I had to tap them into the swing arm with a rubber hammer. Will try a different brand next time.
fit great looks good way better than stock make adjusting chain way faster .
the design of the blocks makes for a tight fit... i even had to sand one down by hand inordor to get it even in the swing arm
THESE SPACERS LOOK GREAT, BUT ARE A LITTLE LENGTHY. WITH THE LOCK NUT AND BOLT TURNED ALL THE WAY IN THE SWINGARM, THIS SPACER WILL HAVE THE CHAIN SPACING STARTING AT THE CENTER OF YOUR READINGS OFF OF YOUR SWINGARM. NOT A BIG DEAL IF YOU PURCHASE A QUALITY CHAIN THAT WON'T STRETCH VERY EASILY.
I got a set for my CR and my YZ. They fit good and look nice. Nice price too.