RECEIVED THE 30MM REAR WHEEL SPACERS FOR MY YFZ450 JUST BEFORE LEAVING FOR LITTLE SAHARA SAND DUNES IN UTAH, EVERYTHING I NEEDED TO INSTALL, AFTER REMOVING MY QUAD FROM THE TRAILER RIGHT THERE IN THE DUNES, FIT PERFECT GAVE ME MORE TRACTION AND STABILITY. TOOK ME A MINUTE TO GET USED TO THE NEW FEEL BUT WAS EXTREMELY WORTH THE $$$... THANK YOU GUYS AT MOTOSPORTS ...
Rock Billet Wheel Spacers
Write your review and you'll automatically be entered in our monthly drawing. Include an image or video to DOUBLE your chances to win!Write Your Review
Put 30mm on the front and 45mm on the rear of my Grizzly and with the 2" lift they set the wheeler stance perfect
They fit well and were easy as it gets to installe. My 400EX is more stable.
looks great easy to install
The only thing I don't like about this product is that they only come polished, I powder coated mine black and they look sick.
The wheel spacers are easy to install and well made. The difference in stability on my 2013 raptor350 was immediately noticable. I have wheel spacers on my jeep grand cherokee allmost ecaxtly the same, so i have no question of saftey or durability. I would recommend them to anyone.
I put these on my 2007 YAMAHA RHINO660 , it made it more stable allowing me to go faster.
great price and product
THIS IS WAY BETTER THEN BUYING EXTENDED AXLES OR LONG TRAVEL A-ARMS. FOR $150 YOU CAN GET THE SAME EFFECT OF SPENDING $600 BUCKS. INSTALLED THESE ON MY 05 YFZ 450 AND I CAN TAKE ANY CORNER TEN TIMES FASTER THAN I COULD WITHOUT. HANDLES WELL ENOUGH THAT I CANT RIDE HARD ENOUGH TO NEED THE TINY DIFFERENCE THE LONG TRAVEL A-ARMS WOULD MAKE.ONLY CON IS I WISH I HAD GOT THE 35 MM INSTEAD OF THE 45MM BECAUSE IT GETS TIGHT RUNNING BETWEEN ROCKS IN THE WASHES.
I got these 4x156 spacers for a 09 raptor 700. They install easily with just 4 lug nuts that are used to hold on your typical wheel. Torqued to the proper spec they are machined perfectly!! they sit right inside the raised ridges on the factory hub for a guided fit. They do not wobble or are out of round. I got these in conjunction with a axcaliber adjustable rear axle so I can widen out for Dunes and racing and with just about 20 min I can have front and rear back to trail width and ready to go. Great parts and super quality..
I put these spacers on my 07 Rincon after I installed 2" lift kit. The wheel spacers really made my quad stable and I am able to handle off camber situations with out the fear of rolling. Also made turning more responsive by allowing front tires to grab better. Gave my quad a better look and stance. Easy to install. Machining is perfect.
A cheap way to widen the quad. Work good
Have used these for a few months now with no issues at all. I have heard stories of use them, dont use them. I needed a budget spacer for my quad instead of adding +1 or +2 a arms. These are holding up fine and are an excellent bolt on part for an extra 1/2 inch on each side for a total of 1 inch. May not sound like much, but definitely helps in cornering over stock.
Put the front wheel spacers on my Honda 450R before heading to the Silver Lake Sand Dunes. I was already running a wide rear axle. The front spacers gave my machine a much wider stance and made it much more stable. During previous rides at high speeds over the whoop-de-doos my machine was always trying to swap ends. Now I can hit the rough sections with much more confidence that I can track in a straight line. If you widen the rear axle you owe it to yourself to extend the width on the front end also.
held up to woods riding,motocross and anything else i threw at em. when u cant afford suspension,these will do until u can.
i put these on my 2009 kfx 450 using loctite because i ride at tracks with large jumps and rode for about a total of ten hours. i was riding trails at my buddies house and took a corner hard and my left rear wheel decided to come off, wheel spacer and all. Three of my lugs got bent when my hub dug into the ground and i had to limp it back to his house on three wheels. Before i went out i even checked all the bolts holding the spacer and the rim on and they were all tight. So i dont know what happened but im definietly going with an extended axle now. Cheap junk!!
off by a like 16th of a inch on the front spacers. real pain to get on
Easy to install and widened enough to keep tires from rubbing.
Excellent fit, strong, makes quad handle hundred times better.
I put these spacers on my 2008 trx 250ex and the front ones were fine but the rear ones completely destroyed my rear hubs it stripped the heck out of them and bent my axle because it was stable and the alan wrench nuts that u bolt on your rim to loosen up
They are strong and were easy to put on have them on a 08 ricon and it turns even better now with a lil wider stance!
Just be sure to correctly select the Year/Make/Model of your ATV before ordering so we can be sure to send you the correct spacers for your ATV. Also, feel free to give us a call at 888-676-8853 and we would be happy to help you out with your order.