Pro Taper Contour Handlebars - Oversized 1-1/8

$74.99
$67.49 (10% off)
4.90 out of 5 stars
Fitment Expert:
Dirt Bike Dirt Bike ATV Make Year Model
 
Pro Taper Contour Handlebars - Oversized 1-1/8
Pro Taper Contour Handlebars - Oversized 1-1/8
  • Description
  • Reviews (109)
  • Q&A (53)
  • Sizing Chart
  • Fitment

In 1991, Pro Taper introduced the 1-1/8-inch Taperwall handlebar and the industry hasn't been the same since. The Corona, CA based company expanded its product line to include clutches, sprockets and grips, among others, but Pro Taper never turned its back on what landed them in the motocross world.

The Pro Taper Contour Handlebar - Oversized is a best seller and made with the same quality as its Standard 7/8-inch Pro Taper brother, it's just, well, oversized! Check out the features that come with this solid beast and you'll understand why it's a must-have on the race course by riders like Nate Adams, Levi Sherwood and Robbie Maddison.

  • Made with aerospace-grade aluminum with 5 mm wall tubing.
  • Chemically applied scratch and peel-resistant "un-sticker" graphics.
  • Knurled clutch side for secure grip hold.
  • 1/4" cut guides for precise width modification.
  • Includes high-density molded pad.
  • Great value for bar / pad combo.
  • Bend and color for every application.
  • Note: Pro Taper Contour Handlebars require the use of 1-1/8 inch oversized handlebar clamps (sold separately).
4.9 out of 5 stars (109)
4.9 out of 5 stars
5 star   93
4 star   12
3 star   2
2 star   1
1 star   1
See Terms and Conditions
1-10 of 109
Overall 5 out of 5 stars
Location: Louisiana, USA
LoganW
Best Bars Out There!

These are amazing handle bars, bought the atv mid bend and they feel, look, and perform great, will buy again if they ever bend

Overall 5 out of 5 stars
yfzguy450
Great Bars

Amazing bars, they hold up like no other. My steering stem bent before my bars did

Overall 5 out of 5 stars
Top 1000 Contributor
Location: Houston
Kelly231
Best Bars Period !

Have been using Pro Tapers over 20 years. They takes spills that other bars can't . That simple .

Overall 5 out of 5 stars
Top 1000 Contributor
Location: Jonesville, NC 28642, USA
hondarider3
Great bars

Great bars have on both my bikes much better then stock worth the money

Overall 5 out of 5 stars
Verified Purchaser
Location: Hamptonville, NC
hondarider
Great bars

Best bars for the money have a pair for both of my bikes

Overall 5 out of 5 stars
Verified Purchaser
HONDACRF450R
Better than I expected

Works good and makes my CRF450R handle much better.

Overall 5 out of 5 stars
Top 1000 Contributor Verified Purchaser
Location: Walkerton IN
maher462
Great bars

I have been running pro taper for years and absolutely love them. Have hit these pretty hard on the ground and they usually with stand it. But every bar bends at some point in time.

Overall 5 out of 5 stars
Top 25 Contributor Verified Purchaser Top 50 Contributor Top 100 Contributor
mikesean
Strong Bars

Very strong bars the only time i have bent these it has resulted in broken bones. meaning they get the job done and as long as you don't break yourself chances tare these will still be good to go.

Overall 5 out of 5 stars
Verified Purchaser
Location: Waynesville, OH
droscoe5
Pro Taper CR High

Excellent bars for woods riding. They never seem to bend when you hit a tree or fall in a creek. Recommend these bars to those individuals who have a hard time with bending bars after crashes or falling over.

Overall 5 out of 5 stars
racer381
Durable Handlebars!

I run Protaper cr highs on both my bikes. Ive crashed hard and the bars didnt bend even when my clamps did, a set of clamps are cheaper than a new handlebar though.

1-10 of 109
Total Questions (53)
Questions with answers:
  53
Questions without answers:
0
1-10 of 53
kevin Over 5 months ago
I have a 2013 WR 250 R I am 6 feet tall and I ride trails I usually like to stand what bars would be comfortable for me?
MotoSport Staff Expert
Over 5 months ago
MotoSportExpert
Really handlebar bend is all about personal preference. It would be hard for me to recommend a specific bar you would like. I would recommend looking at the Size Chart for the Measurement dimensions of each of the handlebar bends.
jessie Over 5 months ago Location: chatsworth
Which bend is the closest to the oem bars for a 2012 yz450f ?
MotoSport Staff Expert
Over 5 months ago
MotoSportExpert
Unfortunately we do not have handlebar specs for your ATV. Using the sizing cart to the right of the Q&A tab you can match up the closest bar with measurements from your stock bars.
Hunter Over 5 months ago Location: Arkansas
Can I use the stock clamps on my bike with these bars?
1999 rm125
Expert MotoSport Staff
Over 5 months ago
MotoSportExpert
no, you would need the universal 1-1/8" bar mounts for your 1999 Suzuki RM125.
Bobby56 Over 5 months ago Location: GA
2012 RM85?
I bought this new for my son and looking to get some ProTaper SE bars. Which bend of the SE will be close to the stock bar except for taller?
Top 1 Contributor
Over 5 months ago
MotoSportExpert
You can find a reference of the OEM bars for your RM85 on Renthal's website: http://www.renthal.com/shop/fit-my-bike Renthal also makes the fat bars that are similar to the Contours that you can purchase.
Alex Over 7 months ago
What size handlebars will fit my 1999 yz250?
Expert MotoSport Staff
Over 7 months ago
MotoSportExpert
The 1999 Yamaha YZ250 came with a solid 7/8" bar mount. To run the 1 1/8" bars you will need a universal 1 1/8" bar mount which will bolt into your stock clamp.
MORGAN Over 7 months ago Location: Leicestershire, UK
KTM 525 XC ATV which one would be the best for my quad?
I was happy with my stock one but after accident I damage it and need replacment.
MotoSport Staff Expert
Over 7 months ago
MotoSportExpert
Really handlebar bend is all about personal preference. It would be hard for me to recommend a specific bar you would like. I would recommend looking at the Size Chart for the Measurement dimensions of each of the handlebar bends.
DSBogran650X Over 7 months ago Location: Dallas
What's the best handlebars option for my Bombardier DS 650X? I need help please...?
I need to change the handlebars for my atv but not sure what type or bend to get... I use my atv mostly on the track... Also any tips on clutch kits for it...
Expert MotoSport Staff
Over 7 months ago
MotoSportExpert
Really handlebar bend is all about personal preference. It would be hard for me to recommend a specific bar you would like. I would recommend looking at the Size Chart for the Measurement dimensions of each of the handlebar bends. Feel free to give us a call at 888-676-8853 and we would be happy to help you out with your order.
rich Over 8 months ago Location: Richmond, CA, USA
What is the best bend for my 2000 cr 500?
Top 1 Contributor
Over 8 months ago
MotoSportExpert
The stock bar is listed as a "CR LOW" bend for your Honda CR500
jake Over 8 months ago Location: Missouri, USA
Is the Carmichael bend a good choice for mid to high range bend?
My stock 2007 RMZ250 bars seem super low to me.
MotoSport Staff Expert
Over 8 months ago
MotoSportExpert
The Windham bend is a "Tall" handlebar. You can find handlebar measurements in the sizing chart to the right of the Q&A tab
nitromx458 Over 9 months ago
What bend should I buy for a 2008 ttr 125?
Im buying the different clamps
Top 1 Contributor
Over 9 months ago
MotoSportExpert
Handle bar bends are a personal preference. Renthal list a bend that is close to stock as the CRF150/230F bend they make, the 799 bend. A bend close that I would suggest would be the KX High, but they will be wider than stock.
1-10 of 53
Pro Taper Handlebars

EVO
BendWidthHeightRiseClamp AreaSweepControl Area
Carmichael 31.5in (80cm) 3.0in (7.7cm) 1.6in (4cm) 7.7in (19.5cm) 2.2in (5.5cm) 7.1in (18cm)
Henry/Reed 31.5in (80cm) 3.6in (9.2cm) 2.6in (6.6cm) 8.1in (20.6cm) 2.2in (5.7cm) 7.1in (18cm)
Pastrana MX/RM LOW 31.5in (80cm) 2.9in (7.4cm) 2.2in (5.6cm) 8.0in (20.3cm) 2.2in (5.5cm) 7.1in (18cm)
Windham/RM MID 31.5in (80cm) 3.9in (9.9cm) 2.9in (7.4cm) 8.6in (21.9cm) 2.1in (5.3cm) 7.1in (18cm)
Factory Suzuki/KTM Stock 31.5in (80cm) 3.6in (9.2cm) 2.4in (6.2cm) 8.5in (21.7cm) 1.9in (4.7cm) 7.1in (18cm)
Woods HIGH 31.5in (80cm) 3.8in (9.7cm) 2.7in (6,9cm) 8.3in (21.1cm) 2.4in (6.1cm) 7.1in (18cm)
CR HIGH 31.5in (80cm) 3.7in (9.5cm) 2.8in (7.1cm) 8.0in (20.4cm) 2.4in (6cm) 7.1in (18cm)
YZ HIGH 31.5in (80cm) 3.3in (8.4cm) 2.2in (5.6cm) 8.0in (20.2cm) 2.0in (5.2cm) 7.1in (18cm)

Contour
BendWidthHeightRiseClamp AreaSweepControl Area
Carmichael 31.5in (80cm) 3.0in (7.7cm) 1.4in (3.6cm) 7.7in (19.5cm) 2.2in (5.5cm) 7.1in (18cm)
Henry/Reed 31.5in (80cm) 3.6in (9.2cm) 2.4in (6.1cm) 8.1in (20.6cm) 2.2in (5.7cm) 7.1in (18cm)
Pastrana FMX 31.5in (80cm) 4.8in (12.1cm) 2.8in (7cm) 9.3in (23.6cm) 2.2in (5.5cm) 7.5in (19cm)
Pastrana MX/RM LOW 31.5in (80cm) 2.9in (7.4cm) 2.1in (5.4cm) 8.0in (20.3cm) 2.2in (5.5cm) 7.1in (18cm)
Windham/RM MID 31.5in (80cm) 3.9in (9.9cm) 2.8in (7cm) 8.6in (21.9cm) 2.1in (5.3cm) 7.1in (18cm)
Factory Suzuki/KTM Stock 31.5in (80cm) 3.6in (9.2cm) 2.4in (6.2cm) 8.5in (21.7cm) 1.9in (4.7cm) 7.9in (20cm)
Woods LOW 31.5in (80cm) 2.8in (7.1cm) 2.6in (6.6cm) 8.3in (21.1cm) 2.4in (6cm) 7.7in (19.5cm)
Woods HIGH 31.5in (80cm) 3.7in (9.5cm) 2.6in (6.6cm) 8.3in (21.1cm) 2.2in (5.7cm) 7.1in (18cm)
KX HIGH 31.5in (80cm) 4.3in (10.8cm) 2.8in (7cm) 9.3in (23.6cm) 2.2in (5.6cm) 7.9in (20cm)
CR MID 31.5in (80cm) 3.2in (8.2cm) 2.2in (5.6cm) 9.1in (23cm) 2.2in (5.7cm) 7.9in (20cm)
CR HIGH 31.5in (80cm) 3.7in (9.5cm) 2.6in (6.7cm) 8.0in (20.4cm) 2.4in (6cm) 7.1in (18cm)
YZ HIGH 31.5in (80cm) 3.3in (8.4cm) 2.1in (5.3cm) 8.0in (20.2cm) 2.0in (5.2cm) 7.1in (18cm)
Universal LOW 31.5in (80cm) 2.8in (7.1cm) 1.5in (3.8cm) 8.8in (22.3cm) 2.2in (5.5cm) 7.9in (20cm)
ATV BendsWidthHeightRiseClamp AreaSweepControl Area
ATV LOW 32.0in (81.3cm) 3.7in (9.5cm) 2.6in (6.7cm) 9.0in (22.9cm) 2.4in (6cm) 7.9in (20cm)
ATV MID 32.0in (81.3cm) 4.3in (10.8cm) 2.8in (7cm) 9.3in (23.6cm) 2.2in (5.6cm) 7.9in (20cm)
ATV HIGH 32.0in (81.3cm) 4.8in (12.1cm) 2.8in (7cm) 9.3in (23.6cm) 2.2in (5.5cm) 7.9in (20cm)
Raptor 32.0in (81.3cm) 5.6in (14.3cm) 4.5in (11.5cm) 9.3in (23.6cm) 3.4in (8.7cm) 7.9in (20cm)
Mini Bike BendsWidthHeightRiseClamp AreaSweepControl Area
Mini LOW 30.5in (77.5cm) 3.1in (8cm) 2.1in (5.3cm) 8.5in (21.6cm) 2.0in (5cm) 7.9in (20cm)
Mini HIGH 30.5in (77.5cm) 4.1in (10.5cm) 3.0in (7.6cm) 8.7in (22.1cm) 2.0in (5.2cm) 7.9in (20cm)

SEVEN EIGHTHS
BendWidthHeightRiseClamp AreaSweepControl Area
Carmichael 31.5in (80cm) 3.0in (7.7cm) 1.6in (4cm) 7.4in (18.8cm) 2.2in (5.6cm) 8.1in (20.6cm)
Henry/Reed 31.5in (80cm) 3.6in (9.2cm) 2.4in (6cm) 8.9in (22.5cm) 2.2in (5.7cm) 7.3in (18.6cm)
Pastrana MX/RM LOW 31.5in (80cm) 2.9in (7.4cm) 2.1in (5.4cm) 9.0in (22.8cm) 2.2in (5.5cm) 7.4in (18.9cm)
Windham/RM MID 31.5in (80cm) 3.9in (9.9cm) 2.7in (6,9cm) 9.6in (24.3cm) 2.1in (5.4cm) 7.4in (18.9cm)
Factory Suz/KTM Stock 31.5in (80cm) 3.6in (9.2cm) 2.4in (6.1cm) 9.2in (23.3cm) 1.9in (4.7cm) 7.5in (19cm)
CR LOW 31.5in (80cm) 2.8in (7.1cm) 2.2in (5.5cm) 9.1in (23.1cm) 2.7in (6.8cm) 7.7in (19.5cm)
CR MID 31.5in (80cm) 3.2in (8.2cm) 2.2in (5.6cm) 9.1in (23cm) 2.2in (5.7cm) 7.7in (19.5cm)
CR HIGH 31.5in (80cm) 3.7in (9.5cm) 2.6in (6.7cm) 9.2in (23.3cm) 2.4in (6cm) 7.3in (18.6cm)
KX LOW 31.5in (80cm) 2.8in (7.1cm) 2.1in (5.4cm) 9.1in (23.1cm) 2.4in (6cm) 7.7in (19.5cm)
KX HIGH 31.5in (80cm) 4.3in (10.8cm) 2.8in (7cm) 9.2in (23.3cm) 2.2in (5.6cm) 7.2in (18.4cm)
RM HIGH 31.5in (80cm) 3.2in (8.2cm) 2.1in (5.3cm) 8.8in (22.3cm) 2.9in (7.3cm) 7.7in (19.5cm)
YZ LOW 31.5in (80cm) 2.6in (6.7cm) 1.9in (4.8cm) 8.6in (21.9cm) 2.8in (7cm) 7.7in (19.5cm)
YZ HIGH 31.5in (80cm) 3.3in (8.4cm) 2.1in (5.3cm) 8.7in (22.2cm) 2.0in (5.2cm) 7.7in (19.5cm)
ATV BendsWidthHeightRiseClamp AreaSweepControl Area
ATV LOW 32.0in (81.3cm) 5.5in (14cm) 3.5in (8.8cm) 9.0in (22.8cm) 3.3in (8.4cm) 8.1in (20.6cm)
ATV MID 32.0in (81.3cm) 5.9in (15cm) 3.7in (9.3cm) 9.3in (23.7cm) 3.0in (7.6cm) 8.1in (20.6cm)
ATV HIGH 32.0in (81.3cm) 6.3in (16cm) 4.1in (10.4cm) 9.3in (23.6cm) 3.9in (10cm) 7.8in (19.9cm)
Raptor 30.3in (77cm) 5.6in (14.3cm) 4.5in (11.5cm) 6.3in (16.1cm) 3.4in (8.7cm) 8.1in (20.6cm)
Trials BendsWidthHeightRiseClamp AreaSweepControl Area
Trials LOW 32.5in (82.5cm) 3.9in (9.9cm) 2.1in (5.4cm) 6.6in (16.7cm) 1.9in (4.9cm) 8.1in (20.6cm)
Trials MID 32.1in (81.5cm) 4.2in (10.6cm) 3.0in (7.7cm) 6.8in (17.3cm) 2.0in (5cm) 7.9in (20cm)
Trials HIGH 32.1in (81.5cm) 4.4in (11.3cm) 3.3in (8.4cm) 6.8in (17.3cm) 1.9in (4.9cm) 8.1in (20.6cm)
Mini Bike BendsWidthHeightRiseClamp AreaSweepControl Area
Honda Mini 28.7in (73.0cm) 4.6in (11.7cm) 3.5in (8.9cm) 6.5in (16.6cm) 2.0in (5cm) 7.7in (19.5cm)
Kawasaki Mini 28.7in (73.0cm) 3.7in (9.4cm) 3.2in (8.1cm) 6.9in (17.6cm) 2.0in (5cm) 7.3in (18.6cm)
Suzuki Mini 28.7in (73.0cm) 4.0in (10.2cm) 3.1in (8cm) 6.8in (17.2cm) 2.0in (5cm) 7.3in (18.6cm)
Yamaha Mini 28.7in (73.0cm) 3.9in (9.9cm) 2.8in (7cm) 6.3in (16cm) 2.3in (5.8cm) 7.3in (18.6cm)
Schoolboy Low 28.1in (71.5cm) 3.1in (7.8cm) 2.0in (5.1cm) 5.4in (13.7cm) 1.9in (4.7cm) 7.7in (19.5cm)
Schoolboy High 28.1in (71.5cm) 3.5in (8.8cm) 2.4in (6.1cm) 5.7in (14.4cm) 1.8in (4.5cm) 7.7in (19.5cm)
Schoolboy Pro 29.3in (74.5cm) 3.1in (8cm) 2.8in (7.2cm) 7.9in (20cm) 2.0in (5.2cm) 7.9in (20cm)
XR50 28.5in (72.4cm) 6.7in (17.1cm) 6.0in (15.2cm) 7.2in (18.4cm) 1.7in (4.4cm) 6.3in (16.1cm)
KTM50 25.5in (64.8cm) 3.1in (8cm) 2.8in (7.2cm) 6.2in (15.7cm) 1.7in (4.4cm) 6.6in (16.7cm)
KLX110 / DR-Z110 / CRF110 31.5in (80cm) 5.6in (14.3cm) 4.8in (12.3cm) 7.2in (18.4cm) 1.7in (4.4cm) 7.9in (20cm)

FUZION
BendWidthHeightRiseClamp AreaSweepControl Area
Carmichael 31.5in (80cm) 2.9in (7.3cm) 1.4in (3.6cm) 7.7in (19.5cm) 2.2in (5.5cm) 8.3in (21cm)
Henry/Reed 31.5in (80cm) 3.6in (9.2cm) 2.4in (6.1cm) 8.1in (20.6cm) 2.2in (5.7cm) 7.2in (18.2cm)
Windham/RM MID 31.5in (80cm) 3.9in (9.9cm) 2.8in (7cm) 8.6in (21.9cm) 2.1in (5.3cm) 7.1in (18cm)
CR HIGH 31.5in (80cm) 3.7in (9.5cm) 2.6in (6.7cm) 8.0in (20.4cm) 2.4in (6cm) 7.1in (18cm)
YZ HIGH 31.5in (80cm) 3.3in (8.4cm) 2.1in (5.3cm) 8.0in (20.2cm) 2.0in (5.2cm) 7.5in (19cm)
SX Race 31.5in (80cm) 3.4in (8.7cm) 2.1in (5.45cm) 8.5in (21.6cm) 2.1in (5.4cm) 7.7in (19.5cm)

METAL MULISHA
BendWidthHeightPullback
Metal Mulisha MX (Henry/Reed) 31.5in (80cm) 3.6in (9.2cm) 2.4in (6.1cm)
Deegan FMX (KX HI) 31.5in (80cm) 4.3in (10.8cm) 2.8in (7cm)
Twitch FMX (Pastrana FMX) 31.5in (80cm) 4.8in (12.1cm) 2.8in (7cm)