For orders of $49.00 or more
Orders over $49.00 will receive free 3-day express shipping. This is a residential delivery service, with deliveries Monday through Friday from 9:00am to 8:00pm.
I love the fact I can change from a long throw throttle to a short throw throttle throw in a matter of minutes.
5 out of 5 stars
Ease of Installation
1 year 9 months agoLocation: Ocala, FL, USA
Easy install, great throttle response
I swapped out to the largest reel from my stock throttle assembly and it made a world of difference. Only knock I have is i had a slow crash on the right side and the grip provided split towards the end of the bar. Not a huge deal, but the pro-taper grips I've had on there have never been damaged in any of my many crashes. The installation was a breeze and I kicked myself for putting it off for so long not wanting to mess with the throttle cables and such thinking back to when i raced I4s and messing with that carb/throttle cable assembly...
5 out of 5 stars
Top 1000 Contributor
Over 4 years agoLocation: Jackson, WY
'09 CRF 450R: The Motion Pro throttle assembly is a complete kit, from the carb/throttle body to the grips. After a pretty hard trip to the ground I noticed my throttle was sticking and further inspection showed a broken throttle tube and kinked pull side cable. Finding a complete kit with 4 different cam sizes made my day. After taking my time to route the cables and adjust them the cams can be switched out with minor adjustment on the topside cable adjusters. Sweet kit, from the cables & cams to the grips, I only wish motosport would carry the billet throttle tube for this kit.
kx450fguy2 days 14 hours agoLocation: California, USA
I have a kx450f would it help to make the throttle a bike stiffer since i feel like its to sensitive?
i just use it for trails and sometimes i feel like i'm twisting just a little but the bike accelerates too fast, would this kit make it so it requires me to twist the throttle more so that the throttle can open.
Can I still run my Acerbis bark busters? The ones that bolt into the ends of the handlebars?
My bark busters bolt onto my bars like normal and wrap around to the ends and bolt into the ends of the bars. Would the throttle tube not allow me to run these.
2 months 26 days ago
The Motion Pro Revolver Throttle Kit (MX/Off-road) includes the Titan throttle tube which has a non removable end cap that would have to be removed. However, Modification of this product voids warranty.
Would this fit inside my start controls on my 2007 gsxr 1000?
Top 1 Contributor
Over 8 months ago
Here are the notes from the manufacturer on the product for your 07 GSXR1000 Suzuki:
For use with stock throttle bodies. Stock reel is 33.4 mm. IMPORTANT - The stock twist throttle assembly on this model incorporates an on/off switch, mode switch, and starter button. The Motion Pro 11-0098 accessory switch only has an on/off switch and starter button, and cannot be used to replace the original switching functions on the stock throttle assembly. In order to install the Rev2 kit and retain all the necessary switching functions, owners of this model will need to install longer aftermarket handlebars (at least 50 mm longer than stock on the right side) and use the stock throttle assembly mounted behind the Rev2 throttle housing. The stock twist throttle assembly can be modified to remove the throttle reel holder portion and leave just the necessary switches. This modification makes it narrower and uses less space on the handlebar. Rev2 Kits have cables specifically designed for fitment on specific models, but the Rev2 throttle itself is not model specific. Therefore, in some situations, the Rev2 kit may not be a direct bolt on installation due to space limitations on the stock handlebar. In some installations, it may be necessary to move other control components on the stock handlebar, shorten the Rev2 throttle tube and grip, install longer aftermarket handlebars, or possibly all of the above. It is up to the end user to determine the best method for fitment on their motorcycle, and ensure that the Rev2 kit is installed properly and with the correct clearances for safe operation. Installation should be done by a qualified mechanic and carefully checked for proper function. Warning: Improper installation could result in great bodily injury or death.
I have a 1985 Cagiva Alazzurra 650 twin.
i am installing clipons on this bike & would like to use your
Revolver throttle kit -- will this product work for my desired
2 years 6 months agoLocation: Portland, OR, USA
We don't have an application for your model unfortunately. You could possibly get it to work, but may take some modifications. The throttle cables themselves may need to be built specific to your application to be used with the Revolver kit.