Easily install any Kuryakyn by Kellermann or other custom L.E.D. turn signals with the Rear Signal Splitter Module available in two versions to accommodate any custom turn signal application.
- Modules are plug-and-play into stock wiring harness and stock taillight remains in place.
- Custom turn signals need to be hardwired to pigtails that can then be plugged into the module outputs.
- Module Details:
- P/N 2584 (3-wire: run power, brake/turn power and ground); left and right outputs provide run and brake / turn functionality, and module can be used as a completely plug-and-play upgrade to Kuryakyn Rear Fender Strip Lights (P/N's 5690, 2898, 2899; sold separately) to convert them from Run-Brake to Run-Turn-Brake.
- P/N 2585 (4 wire: run power, brake power, turn power and ground); left and right outputs provide run, brake and turn functionality.
- P/N 2587 (3-wire: run power, brake and turn power, and ground); allows replacement of stock amber turn signals with red custom turn signals for additional run and brake and turn lighting to the rear of the bike.
- P/N 2588 (4-wire: run power, brake power, turn power and ground); allows removal of stock amber turn signals to replace with custom turn signals that provide additional red run, red brake as well as amber (or red) turn lighting to the rear of the bike.
