Fly Tri-Stand

Fly Tri-Stand
Fly Tri-Stand

$24.99 $26.95
7% Off - Save $1.96

In Stock - Ships Tomorrow!
Description See Also: 22 Reviews 5 Questions
Item #FYL007X

Read More
22 Reviews
3.1 out of 5 stars
5 Star   8 4 Star   2 3 Star   3 2 Star   2 1 Star   7
Write a Review

Write your review and you'll automatically be entered in our monthly drawing. Include an image or video to DOUBLE your chances to win!

Write Your Review Write a review to win $500
All Reviews
Brandon
PA
Decent, but there are better designs

Ordered originally for my 96 YZ125 fits perfect. I would recommend red loctite on the pin that screws into the stand. Does not fit all size axles such as my 04 RM250. Can be a little tricky to setup on uneven ground due to the flat design (corners of the stand dont really dig in). I would prefer if it was made of steel instead of aluminum. I highly recommend you check out the motosport steel triangle stand it fits more bikes and the design is much better and should support the 4 stroke bikes fine.

sposatmi
Brentwood, CA
Lightweight Duty Only

My pin snapped where the threads start. I got the remains of the original pin out of the stand and emailed Fly about obtaining another pin. They never responded. Bottom line is you can't stress this stand or the pin will break. Save your money and buy something else.

YZ250F892
Sucks!

the stand broke, bike fell over, smashed radiator. this is junk!!

mmarquez
Saltillo, MX
Nice product

Nice stand very light and fit to many wheel size

dirtrider666 Top 250 Contributor
Denver, CO
OK Stand

So i bought this at my local motorsports dealer, i got about 5 or 6 months use of it. the other day i stood up on my bike (09 yz250f, i weight 205 pounds) and the stand broke. since its aluminum i cant weld it together. its a good stand, just dont stand on the bike with it. ill probably be buying another one

ieatv8s
Midland, TX
Worst Stand Ever

I bought one of these for my KX450F and within two minutes of using the stand, the cheap cast aluminum pin sheared sending my bike to the ground. I would not recomended this unless your using it for an 85 or smaller - but why take the risk of damaging your bike.

yzalltheway
Great stand

i bought this for a 2006 yz 85 works great there is also interchangable parts to use for a bigger bike great stand its a little pricey but its worth it if you dont have a stand

Fly Tri-Stand
KXrider51 Top 500 Contributor
Jackson, MI
Fly racing tri-stand

nice looking strong stand, i like it a lot but just a little bit pricey for what your getting other than that great product

yzman09
Tampa Florida
GREAT STAND

i bought this stand because i got a bike with no stand.
it works great for my yz85. i can lean it straight up or at an angle. does not fall over. great stand worth the money. buy it

derjuicen
so cal
Pins Are Made Of Pot Metal!

the pins that come with this stand are made of a a horrible cast pot metal and are very weak. the thre pins snap right at the threads and sent my bike to the ground bending my asv lever. gonna be welding a solid piece of round aluminum instead of trying to use a pin again, that should hold up. DO NOT BUY ONE OF THESE STANDS!

dirtbikekid125
JENSEN BEACH, FLORIDA
THE STOCK STAND FOR MY RM125 IS 100X BETTER

I BOUGHT THIS STAND FOR A 2003 RM125.... PIECE OF JUNK.... FIRST OF ALL, THE PIN TO GO INTO THE BIKE IS TOO SHORT AND THE BIKE LEANS WAY OVER. 2ND, THE PIN DOESNT TIGHTEN UP TO WELL AND ALWAYS LOOSENS UP, A FEW TIMES IT EVEN CAME OUT AND FOUND MY 125 ON THE GROUND.. 3RD, THE PIN IS REALLY WEAK AND BENT.... I WOULD NOT RECOMEND, AND WILL NOT BUY AGAIN... I JUST THREW IT OUT.... MY FRIEND BOUGHT A LIFT STAND FOR HIS 125, AND UNTIL I HAVE THE MONEY TO BUY ONE MYSELF. I USE THE STOCK STAND FROM HIS RM125....
I HAD TO GIVE IT ONE STAR BECAUSE THERE WERE NO NEGATIVE STARS

Captain250o
ID
Stand

I have bought two of these stands from a local shop and both of the stands pins broke sending my bike to the ground. The stand itself was ok but the pins that came with it are garbage. will not purchase again

jojopratt Top 1000 Contributor
DO NOT BUY THIS STAND!

this stand is the biggest piece of junk i have ever bought, DO NOT BUY! i took my bike out of the trailer, and set it on my driveway, and when i came back from taking the other bike out of the trailer, it was laying on the ground, the stand didnt snap, wind nocked it over, the stand is hollow aluminum, and it sits so close to the bike, DO NOT BUY!

Wingmn02
Warrenton Va

Be very carefull with this stand!!! After about 2 months the Pin that attached to the stand snaped in half and I found by RM 250 laying on its side just missing my 1998 Mustang GT!!!in my garage! Not happy with this stand!!!!!

chadlampy
No good

used for about 3 months and it snapped. a little breeze knocked my bike over and bent this thing in half. no good.

DirtBikeMurray
Albany, NY
Does not fit CRF 85 Model

I purchased this because the CRF 85 I have did not come with a stand. The stand hole on the 85 sits higher than my 125 or 250 so the bike leans way over and does not stay up with this stand.

I will look for another stand and probably end up using this one on one of my other bikes.

yzrdr Top 1000 Contributor
Kalamazoo, MI

This is a great cheap good looking stand. The only problem i have with it is that it makes it more difficult to lube the chain. I just orderd a lightweight lift stand because of that problem.

Niall8or
Great Sidestand

Great Looks! Great Quality! Great Price!
Bought a used CR125, and it only came with a center stand. Stand came with two pin sizes to fit whatever bike. Way cooler than stock, and cheaper too!

corbear Top 25 Contributor
Fallbrook, CA
Fly stand

this stand is extremely convenient. It is great when you dont need a full bike stand. worth the money!

YAMAHARIDER47 Top 50 Contributor
wilmington, NC
Good UNIVERSAL stand

fantastic stand it fits my yz125 and my kx250f. it comes with two pins which is fantastic soo u know ur getting the right stand for your bike

See 2 More Reviews
5 Questions
Answered:   5
Not Yet:   0
mfielder123
Location: Hartford, CT, USA
Q: Will this fit a 2003 honda cr85?
Over 3 years ago
MotoSportExpert
MotoSport Staff
Over 3 years ago Location: Portland, OR, USA
A: Yes, this stand will fit the frame mounted receiver on the CR85.
UOfootball
Top 500 Contributor
Q: Will this fit a 1993 Honda CR250?
Over 7 years ago
james718
Expert MotoSport Staff
Over 7 years ago Location: Portland, OR
A: Yes this should work just fine.
yamaharacer93
Q: Does it fit a 2001 yamaha yz80?
Over 7 years ago
james718
MotoSport Staff Expert
Over 7 years ago
A: You might have an issue if your axle doesn't have the center drilled out. If you axle is a solid piece this will not work.
yzman09
Over 6 years ago Location: Tampa Florida
A: yes this will fit your YZ80. it comes with 2 bolts. the smaller one will work. i bought this for my 05 yamaha yz85 and it works great!
willierides
Location: NY...out in the country!
Q: What size "tips" does this come with?
Over 7 years ago
What are the diameters of the tips included...what size hole in an axle will they fit?
james718
MotoSport Staff Expert
Over 7 years ago
A: This will fit most standard axles on most mfg bikes. Unfortunately we don't have our warehouse close enough to run out and measure the diameter. These do fit most MX bikes from 65-450's.
dirtrider666
Top 250 Contributor
Over 6 years ago Location: Denver, CO
A: theres a smaller pin for older bikes (1 cm wide) and a larger pin for newer bikes (1.5 cm wide) and im sure it would fit in your bike. hope this helps!
yz80
Location: California
Q: What size bikes will it fit and can it go in an axle?
Over 8 years ago
DirtBikeMurray
Over 8 years ago Location: Albany, NY
A: Works ok on my CRF 250. Does not fit my CRF 85 however.
1-5 of 5