K&N Spin-on Oil Filter

• Product Details

  K&N Powersports Cartridge Oil Filters are designed to satisfy the needs of racers and engine builders as well as the average motorcycle or ATV owner who wants the best oil filter available. K&N cartridge oil filters trap harmful contaminants while the filter's construction allows for high oil flow rates. K&N Oil Filters are covered by a limited warranty to be free from defects in materials and workmanship when installed and replaced using engine and equipment manufacturer's recommended service intervals.

  • K&N Performance Motorcycle Oil Filters are constructed of resin-impregnated synthetic media, meaning high flow rate and outstanding filtration.
  • When you push your motorcycle to its limits, take comfort in knowing the K&N Performance Oil Filter is keeping up with your engine by allowing greater flow rate.
  • Large, uniform pleated synthetic filter media provides high flow rates and outstanding filtration - traps 99% of harmful contaminants.
  • K&N has developed their performance oil filter to optimize efficiency with high end synthetic and synthetic blend oils; synthetic media allows for the higher-flow rates associated with synthetic and synthetic blended oils.
  • K&N performance oil filters come with a common 17 mm nut, drilled for safety wire, mounted on the filter shell. This makes it possible to change out the oil filter with ease and no special tools.
  • K&N also uses an anti-drainback valve (where applicable) to eliminate dry starts by preventing oil from draining back into the crankcase during engine shutdown.
  • On many models, K&N also incorporates a pressure (PSI) relief valve to prevent oil system damage.
  • To prevent installation damage K&N uses a rolled thread to avoid stripping.
  • Protected by a heavy-duty canister and base plate, with a double-rolled seal.
  • Pre-lubricated base gasket is used to provide a positive seal while allowing easy install and removal.
  • K&N Limited Warranty.

  Filter Specifications:

  • K&N part number: KN-198.
  • Product style: Oil filters.
  • Anti drain back valve: Yes.
  • Bypass valve: Yes.
  • Filter material: High flow premium media.
  • Gasket material: Nitrile rubber.
  • Height: 3.313 inches (84 mm).
  • Outside diameter: 2.563 inches (65 mm).
  • PSI relief valve: Yes.
  • Removal nut: Yes.
  • Style: Canister.
  • Thread specification: M20 x 1.5.
  • Removal nut size: 17 mm.
  • Weight: 0.61 pounds (0.28 kg).

  Report Incorrect Product Information

  ---

  Read More

• K&N Spin-on Oil Filter Review

• 4 Questions about the K&N Spin-on Oil Filter

• Fitment

Find More