SP Connect Brake Mount

• Product Details

  Keep an eye on your destination - and always keep an eye on the road. With the Brake Mount, your SP Connect Phone Case can be attached to the maxi-scooter, scooter or your moped so you can navigate safely and get from A to B faster.

  This bracket will fit any brake fluid reservoir between 40.5 and 61.5 mm wide (e.g. Yamaha, Peugeot, etc.). It is best to simply measure your container. Screw the bracket directly onto the lid by replacing the existing screws with the two stainless steel screws (included).

  The brake mount can be rotated 360 and fixed in a suitable position. The flexible arm can be adjusted up to a maximum of 72 and down to a maximum of 60.

  • For maxi-scooters, scooters, mopeds and other motorbikes.
  • Mounts to the lid of the brake fluid reservoir (40.5 - 61.5 mm).
  • Wide range of adjustment possibilities.
  • Mobile phone can be fixed in portrait or landscape format.
  • Note: If you are using a smartphone with a mechanical image stabilizer, SP Connect recommends using their additional vibration-dampening module, the Anti Vibration Module to best prevent possible damage to your phone's camera caused by vibrations from motorcycle engine. If you continue to have problems and are not sure, please stop using the product in combination with this smartphone and contact the manufacturer of your smartphone.

  What's included:

  • 1 x Brake Mount.
  • 1 x Head SPC+.
  • 2 x screw Torx M4x16.
  • 2 x screw Torx M4x18.

  Report Incorrect Product Information

  ---

  Read More

• SP Connect Brake Mount Review

• Ask a Question about the SP Connect Brake Mount

• # Part Numbers for the SP Connect Brake Mount

  Product Variant	Manufacturer Part #
  SPC / SPC+ SP Connect Brake Mount	53235

Find More