This piece really freshens up my ZX6R. Installation around and hour. One tool I wish I had before starting was a crimper for the splicing of the license plate led’s. However a nice set of pliers does the trick. The most difficult part of the job was placing the turn signals into the new plate. I would recommend putting a very light touch of lubrication on the rubber which makes the job easier. Super stoked I bought the yoshimura kit!!!
I will start by saying this is a top quality part and looks great on my bike. Hint: be sure to mark with tape your Left rear turn signal so you can easily keep them apart when mounting in the new brackets. You will need to go slow and be patient on the install. The hardest part for me was inserting the OEM turn signals in the new brackets provided in the kit. I used a screw driver and a lot of pressure from my fingers to get them in -- took me quite a while and my fingers were roached in the end. That was by far the worst part of the job. Also, I used a better quality set of wire connectors than what was in the kit. I wanted to eliminate the potential of separation through vibration. A neat, clean finish. A very nice design. "You will like the way it looks"--and I am not a suit salesman!
This is the second Yoshimura Fender Eliminator I have purchased. The first one went on my previous bike, so getting another one for my new bike was a no brainer. They are very easy to install, instructions explain the assembly process extremely well. I really enjoy being able to retain the factory turn signals and the addition of the LED light to illuminate the license plate. I would have rated 5 stars, but I do not like how the plate and turn signals are mounted together for my particular bike, 2013 Kawasaki ZX-6R. Other than the mounting I am extremely pleased with the kit.
It cleaned up my 2015 kawasaki ninja zx10r's tail. The oem rear fenders were begging to be eliminated. Great liscense plate lights, very bright. Lets people see your plate number while doing wheelies at night then call the cops on you. Turn signal brackets fits the oem's, would recommend getting the yosh led ones will match the FEK obviously. Overall great quality. Great value for money.
Cleaned up the look of the bike. Big difference in how the OEM plate holder looks to how much better this looks. Highly recommended. Used on a 2013 GSXR 600.
2013 650 Ninja. Worth the effort, looks great, quality parts - got rid of that UGLY rear fender. The next one I install will take 1/2 to 3/4 hours, this one, the first, took about 4 hours. No directions to speak of. You're on your own taking the wiring and fender/directional signals apart and installation is little more than a diagram; and you'll need several different tools.
There were other cheaper options to choose from but I'm glad I went with this one for my GSX R600. Install was fairly easy. I cut my wire long pretty much as close to the stock light as possible. This way I would have plenty of wire to work with especially if I had future re-work. The only thing you will need not supplied is some electrical tape to wrap up the wire nice and tight when done. Tucks nicely under seat. The look of this is very clean like its supposed to be there and gets rid of the ugly stock fender. Couldn't be happier with this purchase.
installs with very little effort. fit perfect with no modification needed
Good. The tag lights could be brighter for my liking but easy to install and fit perfectly.