The VTS1 Open Face Motorcycle Helmet by Vega Helmets is the ideal helmet for motorcyclists looking for more comfortable protection, featuring a removable anti-microbial plush liner, lightweight communications-ready EPS shell, six-position outer touring shield, and so much more.
Optically Correct Shield - The optically correct clear shield and open-face design on the VTS1 motorbike helmet brings you closer to the open road and allows you to see things in a their true light. When things get too bright simply flip down the built-in sunshield and cruise on.
Comfort - The VTS1 converts from a full face helmet to half face with its INCLUDED visor and is packed with additional features to keep you comfortable during those long rides on your cruiser, scooter, touring bike, moped, or street bike.
No Need for Sunglasses - The built-in drop-down sun shield allows for easy transition from dark to bright riding conditions. With just the flip of the switch, you're off and riding!
Quick-Release Chinstrap - No more fighting with the traditional D-ring closure...Easily remove or strap your helmet, even without removing your gloves.
Comfort Tech Liner - Every VTS1 comes standard with the Comfort-Tech Liner, the softest liner on the market, guaranteed to make even the longest ride, a little more comfortable.
Included Visor - Transform your touring helmet into an open face by using the included visor.
Pre-Drilled EPS - Easy communication installation (communication system sold separately) with the speaker-ready pockets pre-drilled into the EPS.
Safe - The VTS1 Motorbike Helmet meets or exceeds US DOT standard FMVSS 218 and ECE R 22.05 and is engineered with a thick, high-density fully-vented EPS liner to greatly absorb impact.
Warranty and Accident Replacement Protection - Your VTS1 Helmet is backed by Vega's industry-leading five-year warranty, and in the event of an accident they will replace your helmet at no cost to you with the same or similar product.
Note: Ships with Clear face shield, other tints sold separately.
A: You will have to reach out to Vega to see if they have that part available for sale, or if they warranty that issue for you.
6-5/8 - 6-3/4
20.87" - 21.26" (53 - 54 cm)
6-7/8 - 7
21.65" - 22.05" (55 - 56 cm)
7-1/8 - 7-1/4
22.44" - 22.83" (57 - 58 cm)
7-3/8 - 7-1/2
23.23" - 23.62" (59 - 60 cm)
7-5/8 - 7-3/4
24.02" - 24.41" (61 - 62 cm)
7-7/8 - 8
24.8" - 25.2" (63 - 64 cm)
8-1/8 - 8-1/4
25.6 " - 26" (65 - 66 cm)
8-3/8 - 8-1/2
26.4" - 26.8" (67 - 68 cm)
8-5/8 - 8-3/4
27" - 27.5" (69 - 70 cm)
19.15" - 19.5" (49 - 50 cm)
20.1" - 20.45" (51 - 52 cm)
20.87" - 21.26" (53 - 54 cm)
1. Measure your head size. To do this, pass a tape measure horizontally around your head at a height of about one inch above your eyebrows. When done properly, you will have measured the largest part of your head.
2. Check your measurement with the helmet sizing chart and select the closest size. As the helmet may not always meet your head size exactly, and your head measurement may fall between two sizes, first try the smaller size.
WHEN YOU RECEIVE YOUR HELMET
1. Expand the helmet opening by pulling outwards on each chinstrap, and slide your head into the helmet. If you are unfamiliar with helmets you may be reluctant to pull the helmet down, as it may feel too tight. Even if the helmet is difficult to put on, please use the smallest helmet possible. The helmet should feel snug. If the helmet is not tight, it is too big for you. New helmets will break in and loosen slightly over time.
2. Once the helmet is on:
Check that the helmet inner lining fits snugly all around your head.
Check that the top pad presses on the top of your head.
Check that the cheek pads press up against your cheeks. When you open and close your mouth, you should drag your teeth along the inside of your cheeks.
Check to make sure that you cannot easily slide your finger into the helmet along the side of your temple.
Hold the helmet with one hand on each side. Without moving your head, try to move the helmet up and down, and side to side. You should feel the skin of your head and face being pulled as you try to move the helmet. If you can move the helmet around easily, it is too big. Try a smaller size. Please note that during this check, the chinstraps should be properly fastened.