Shopping CartCLOSE
A'ME Utility ATV Hand Warmers
Most Recent Hand Warmers Reviews
A'ME Off-Road Full Waffle Heated Grips
Jason - Indiana AME heated grips "Installed these on a husqvarna fe450 installation was fairly straight forward. Called AME and made sure you could cut the ends of the grips for bark buster handgaurds and you can. I used a carbide burr to bore a hole in the end and opened it up to the diameter of the bars. Grips have 6 heat settings 1-6. Rode in 10 degree weather with gauntlets yesterday and had the grips set on 2 but was wearing a shift racing cold weather glove and hands were nice and warm. I would imagine with a higher setting a thin moto glove he could be worn. Grip compound is a little stiff compared to a pro grip 788 or a renthal diamond soft. They are a little wider than the a regular grip I had to move my e start button to the inside of front brake to get my lever position right. So far they work great."See all reviews for this product
A'ME Off-Road Full Waffle Heated Grips
XYooper906 - Fayetteville, GA, USA The controller buttons deteriorate quickly! "I've had these grips installed on my 2012 Triumph Tiger 800XC since 2012. The original set of controllers had the buttons turn soft and gooey, much like partially-cured silicone sealer. The internal switches take a fairly firm push to activate. They work fine when new, but as the button material softens, it's nearly impossible to push them with gloves on. You must take your glove off, and use a very firm push with the end of your finger. A'ME warranted my controllers in 2013. The replacement controllers deteriorated within the same time frame. In 2014, though outside the warranty period, they generously warranted them again. They told me that the buttons had improved UV and chemical resistance. It's true, they did last longer, but now in 2016, they have softened enough to make them difficult to push. It really makes it difficult to change heat settings on the fly! I don't store my bike outdoors, and I have never used any harsh chemicals or solvents on the buttons. The grip performance has been fine, but with the poor material choice on the controllers, I wouldn't recommend them to anyone. A'ME, please redesign your controllers!"See all reviews for this product