I put this on my 06 Ninja 650R and love it. Comes with good instructions, but if you aren’t that familiar with wiring, I would watch a couple of you tube videos first. It only requires cutting one wire on the bike (the one that makes the brake light brighter when the brakes are applied; I recommend doing this on the final wiring harness by the brake light so that either brake will activate the module).
Write your review and you'll automatically be entered in our monthly drawing. Include an image or video to DOUBLE your chances to win!Write Your Review
Create more visibility and conspicuity when you are stopped or stopping when you install the BackOFF-XP™.
Compact size. - 2-1/4"L x 1-5/8"W x 5/8"H and can be mounted easily with included double sided tape!
Large power capacity: - 12 volts DC, Maximum Capacity 10 Amps!
Sealed Weather Resistant heat sink case.
Limited Warranty - One Year!
This compact solid state electronic module converts your ordinary brake lights into your choice of two attention getting visual alerting signals when you apply your brakes:
User Selected Mode One:
Emit a visual signal of 4 short light flashes, followed by 1 long light flash (3.5 seconds). The signal automatically repeats itself as long as the brakes are applied. This pattern is not random, but has been selected because of its ability to retain following drivers attention.
User Selected Mode Two:
Emit a visual signal of 5 short flashes, followed by a steady on light that remains steady on as long as the brakes are applied.
This specific mode is now LEGAL. If you live in Tennesee and would like to know more, have a look in your Tennesee Motorcycle Handbook. In all other states motorcycle handbooks recommend that you flash your brakes to increase rear end visibility while stopping, which is what our BackOFF control modules do for you while you're stopped or stopping. Now it is not only recommended in Tennessee but legal to have a control module to do it for you!
Motorcycle Emergency Flasher or Automobile Back-Up
Most states drivers handbooks recommend that you flash your brakes when slowing or stopping. The BackOFF-XP™ automatically facilitates compliance and enhances safety. Install the BackOFF-XP™ and see how much more effective your brake light can be.