In the competitive fiberglass modular helmet category, the innovative EXO-GT3000 is quite simply in a class by itself. The profile is extremely low and aerodynamic while advanced features like the TCT-Ultra pre-preg shell, AirFit(r) liner inflation system, SpeedView(r) drop down sun visor and Everclear(r) no-fog face shield provide comfort, protection and functionality.
TCT-Ultra(r) Pre-Preg Shell - The advanced TCT-Ultra shell structure utilizes a proprietary five layer blend of interlaced and specially formulated fibers that are pre-impregnated with resin to create a strong yet lightweight shell structure.
Ellip-Tec(r) Base Plate - Scorpion's ratchet system uses an elliptical motion that creates 7.6 mm of travel which pulls the shield securely against the eye port, ensuring a proper seal. The Ellip-Tec ratchet system allows for 100% tool-less shield changing in a matter of seconds.
SpeedView(r) Retractable Sun-Visor - Retractable internal sun visor changes positions with a simple slide of a switch.
Everclear(r) No Fog Face Shield - Optically-clear shield with state-of-the art fog-free technology, anti-scratch hardened coating and 100% UV protection. City-Mode tab allows the shield to be locked or left slightly open for a gentle flow of air to the shield and helmet interior.
KwikWick(r)3 Removable/Washable Anti-Microbial Liner - The third generation of Scorpion's moisture-wicking lining material feels cool to the touch in warm weather and warm in cool weather while maintaining anti-microbial and hypo-allergenic properties.
AirFit(r) Liner Inflation System - Inflatable cheek pad system for a superior, personalized fit.
KwikFit(r) Cheek Pads - Kwikfit cheek pads allow easy on and off of the most common styles of eye glasses.
Three Dimensionally Contoured Cheek Pads - Three-dimensionally sculpted, multi-density foam that contours the rider's head shape for better comfort and fit.
Flip-Up Chin Bar - A single button release allows the chin bar to be raised or lowered with either hand.
Aero-Tuned Ventilation System - Intake ports across the front of the helmet force cool air into the helmet interior while exhaust vents maximize movement of hot air out of the helmet.
Three Shell Sizes - Having three shell sizes helps to optimize weight, fit and comfort across the entire size range of XS - 3XL.
Titanium Double D-Ring Chin Strap - High strength titanium D-ring system with industry leading durability.
Also Features: Communication system speaker pockets, aero skirt and breath deflector.
A: This helmet weighs from 2.76lbs (XS) to 4.7lbs (XXL)
SCORPION HELMETSADULT HELMETS
20.9 - 21.3in (53.1 - 54.1cm)
6-5/8 - 6-3/4
21.7 - 22in (55.1 - 55.9cm)
6-7/8 - 7
22.4 - 22.8in (56.9 - 57.9cm)
7-1/8 - 7-1/4
23.2 - 23.6in (58.9 - 59.9cm)
7-3/8 - 7-1/2
24 - 24.4in (61.0 - 62.0cm)
7-5/8 - 7-3/4
24.8 - 25.2in (63.0 - 64.0cm)
7-7/8 - 8
25.6 - 26in (65.0 - 66.0cm)
18.9 - 19.3in (48.0 - 49.0cm)
19.8 - 20.2in (50.3 - 51.3cm)
20.5 - 20.9in (52.1 - 53.1cm)
1. Measure your head size. To do this, pass a tape measure horizontally around your head at a height of about one inch above your eye- brows. When done properly, you will have measured the largest part of your head.
2. Check your measurement with the helmet sizing chart and select the closest size. As the helmet may not always meet your head size exactly, and your head measurement may fall between two sizes, first try the smaller size.
WHEN YOU RECEIVE YOUR HELMET
1. Expand the helmet opening by pulling outwards on each chinstrap, and slide your head into the helmet. If you are unfamiliar with helmets you may be reluctant to pull the helmet down, as it may feel too tight. Even if the helmet is difficult to put on, please use the smallest helmet possible. The helmet should feel snug. If the helmet is not tight, it is too big for you. New helmets will break in and loosen slightly over time.
2. Once the helmet is on:
Check that the helmet inner lining fits snugly all around your head.
Check that the top pad presses on the top of your head.
Check that the cheek pads press up against your cheeks. When you open and close your mouth, you should drag your teeth along the inside of your cheeks.
Check to make sure that you cannot easily slide your finger into the helmet along the side of your temple.
Hold the helmet with one hand on each side. Without moving your head, try to move the helmet up and down, and side to side. You should feel the skin of your head and face being pulled as you try to move the helmet. If you can move the helmet around easily, it is too big. Try a smaller size. Please note that during this check, the chinstraps should be properly fastened.