The EXO-AT950 can be used as a full face ADV helmet with external peak visor attached, or the peak visor can be removed and you have an aerodynamic touring helmet. Scorpion's oversized eye port is extremely wide for greater peripheral vision and downward visibility, and the modular chin-bar can be conveniently flipped up when you stop to get gas or ask for directions. The internal drop down SpeedView sun visor and KwikWick II liner will keep you comfortable all day long even as lighting conditions change throughout the day. Additionally, the no-fog EverClear face shield can be removed and you can use the EXO- AT950 as a dirt helmet with goggles for off-road use. Three shell sizes made of Advanced LG Polycarbonate and dual-density EPS, result in a helmet that is lightweight, strong, and protective.
Advanced LG Polycarbonate Shell - Developed by Scorpion, the industry-leading polycarbonate shell is engineered to be lightweight, strong and maximize impact displacement.
Dual Density EPS - Advanced multi-layer EPS provides superior energy displacement.
Aero-Tuned Ventilation - Intake vents on top force cool air in while exhaust vents maximize movement of hot air out of the helmet.
Dual Position Mouth Vent - First position acts as defroster and Second position acts as defroster and ventilation.
Ellip-Tec Ratchet System - Scorpion's ratchet system uses an elliptical motion that creates 7.6 mm of travel which pulls the shield securely against the eye port, ensuring a proper seal. The Ellip-Tec ratchet system allows for 100% tool-less shield changing in a matter of seconds.
EverClear No-Fog Faceshield - Optically-clear shield with state-of-the-art fog-free technology. Anti-scratch hardened coating. 100% UV-A and UV-B protection.
Oversized Eyeport - Wide eye port allows for greater peripheral vision and downward visibility. When the faceshield is removed, the eye port accommodates most sizes and brands of goggles. (Eyeport is 11 cm tall.)
Everclear SpeedView Drop Down Sun-Visor Retractable interchangeable internal sun visor. Choose the up or down position with an easy-sliding mechanism. Also features the exclusive EverClear anti-fog coating on both surfaces.
KwikWick II Anti-Microbial Comfort Liner - KwikWick II anti-microbial fabric keeps you cool and dry in warm weather, and warm in cool weather. Liner is easily removable and washable.
KwikFit - KwikFit cheekpads allow easy on and off of the most common styles of eyeglasses.
Easy-to-use Flip-up Chin Bar - A single-lever release allows the chin bar to be raised or lowered with either hand.
Communication System Speaker Pockets.
Removable Block-off Plates - Block-off plates included for use when visor is not on helmet.
Three Shell Sizes - Having three shell sizes helps to optimize weight, fit and comfort across the entire size range of XS - 3XL.
1. Measure your head size. To do this, pass a tape measure horizontally around your head at a height of about one inch above your eye- brows. When done properly, you will have measured the largest part of your head.
2. Check your measurement with the helmet sizing chart and select the closest size. As the helmet may not always meet your head size exactly, and your head measurement may fall between two sizes, first try the smaller size.
WHEN YOU RECEIVE YOUR HELMET
1. Expand the helmet opening by pulling outwards on each chinstrap, and slide your head into the helmet. If you are unfamiliar with helmets you may be reluctant to pull the helmet down, as it may feel too tight. Even if the helmet is difficult to put on, please use the smallest helmet possible. The helmet should feel snug. If the helmet is not tight, it is too big for you. New helmets will break in and loosen slightly over time.
2. Once the helmet is on:
Check that the helmet inner lining fits snugly all around your head.
Check that the top pad presses on the top of your head.
Check that the cheek pads press up against your cheeks. When you open and close your mouth, you should drag your teeth along the inside of your cheeks.
Check to make sure that you cannot easily slide your finger into the helmet along the side of your temple.
Hold the helmet with one hand on each side. Without moving your head, try to move the helmet up and down, and side to side. You should feel the skin of your head and face being pulled as you try to move the helmet. If you can move the helmet around easily, it is too big. Try a smaller size. Please note that during this check, the chinstraps should be properly fastened.