Hotbodies Racing Motorcycle Lights & Electrical

Most Recent Lights and Electrical Reviews

Hotbodies Racing Flush Mount LED Turn Signal Hotbodies Racing Flush Mount LED Turn Signal Mike Cheap but does the job "You get what you pay for! The connectors they give you are cheap and not that great. After a few of my own modifications i got them to work how i wanted!"
See all reviews for this product
Hotbodies Racing Flush Mount LED Turn Signal Hotbodies Racing Flush Mount LED Turn Signal Frihet - Petersburg Needs more thought in Hardware "The lights work as expected (light up and do their thing), but the mounting hardware provided could use a great deal more thought. The provide Nylon Washer is 1" diameter and has a 9/32" whole, but the mounting bolt is only 3/16". This means the washer flops around the bolt stud and the nut can slip partly through the whole. The electrical wire is 3/4" from the bolt stud. This means as you tighten the nut (compressing the Nylon Washer), it pinches the electrical wiring. Pinching is bad. Take a 1/4" drill bit (I used an End Mill) and route out a 1/4" notch for the cable to fit through. Oh, and add a 1/8" rubber washer (3/16" whole) to the bolt stud (between light and fairing). this will keep the light "Truly Flush" with the body of the bike."
See all reviews for this product