Everything arrived quickly. The product performed as advertised.
- 4 reviews
- 0 reviews
- 0 reviews
- 0 reviews
- 2 reviews
end tore off from trying to get the clamp tight enough.
The boots appear identical and feel like the originals I replaced. The bands work and look like OEM. They came with plenty of grease too. I think they're going to hold up just fine.
The banding strip is a joke you got to have a special tool to get it tight . Their are other brands out their that come with a banding that don't need a special tool to pull it tight. Yamaha cv boot kit is a better kit and you don't need the tool to get the banding tight. I do not recommend this kit.
The only thing hard about this job was pulling the axle. Boot materials are as good or better than the factory. The clamps are easy to install and tightened up to a very tight fit, WITHOUT SPECIAL TOOLS. I would definitely suggest to a friend and purchase again if there ever is another failure. Fit my 2002 Polaris Sportsman 500HO without a single issue, I barely even got my hands dirty.
as good as o.e.m.
- Answered: 5
- Not Yet: 0
Question asked by Mountainman
Question:Q: Will this work on the inner and outer boots for my 2002 sportsmanQuestion asked Over 4 years ago
Question answered by MotoSportExpertUser's contributor status: Expert MotoSport StaffQuestion answered Over 4 years agoAnswer: A: Once you machine has been selected the drop down box will let you select between the inner or outer boot. Also, feel free to give us a call at 888-676-8853 and we would be happy to help you out with your order.
Question asked by Matt
Question:Q: Will this work inbound on my 06 brute 750?Question asked Over 5 years ago
Question answered by MattUser's contributor status: MotoSport Staff ExpertQuestion answered Over 5 years agoAnswer: A: Motor Master has CV boot kits listed for the inboard side of the CV axle for the front and rear axles! Please be sure to select the correct fitment in the pull down menu.
Question asked by Bobby
Question:Q: Does this boot fit the front inner and outer cv?Question asked Over 5 years ago
Question answered by MotoSportRyanTUser's contributor status: MotoSport Staff ExpertQuestion answered Over 5 years agoAnswer: A: This kit would only fit the Outbound CV on your Honda Rancher 350 4x4. I would recommend taking a look at the All Balls CV Boot Kits as they are available for both the Inner and Outer CV Joints on your Rancher. You can find the All Balls Kits here: http://www.motosport.com/utility/2006-HONDA-TRX350R4X4--all-balls-cv-boot-kit?mmy_source=topnav
Question asked by builder
Question:Q: The Forman boot kits, do you need to remove the axel to put on?Question asked Over 10 years ago
Question answered by james718User's contributor status: MotoSport Staff ExpertQuestion answered Over 10 years agoAnswer: A: The boots are not split down the middle, so the axle must be removed to install the new boot.
Question asked by LosDos
Question:Q: What is the difference in the inboard kit by motormaster vs the outboard kit.Question asked Over 10 years ago
Question answered by JesseCUser's contributor status: MotoSport StaffQuestion answered Over 10 years agoAnswer: A: The inboard kit is for the inner cv joint and the outboard kit is for the outer cv joint