Write your review and you'll automatically be entered in our monthly drawing. Include an image or video to DOUBLE your chances to win!Write Your Review
Once I got it all hooked up it works great. Only problem is it only works on two lights. So if you want to hook up more then two LED turn signals you need to leave at least one pair of stock lights on your bike so they will work right.
I have an 05 R6 and the relay worked perfectly with the LP LED signals. A quick search online and I found where the relay was located on my bike (under the seat) but it would have been nice if the relay came with instructions or a diagram for this purpose. Also, this relay isn't exactly like the factory one. The way it secures to the bike is different so I couldn't use the factory hold down.
The relay works just as intended. I have the LED turn signals in the front as well as an LED (integrated) taillight in the back and with this relay installed I get the correct flash pulse without having to wire resistors to every light on the bike. this relay makes it really easy to fix by just removing the seat, plugging it in, and going for a ride.
After all the c**p I've bought from many reputable dealers that didn't fit or work, it is a very pleasant change to find an item that fits (2002 Yamaha FZ1) without any unpleasant surprises and works just as was stated.
Installed Proton LED turn signals (with electronic resistance compensation) and they worked good but the stock rear turn signals were a little bit fast and out of sync. Quickly installed the Lockhart Phiillips LED relay and everything works as it should.
Shipped quickly and fast delivery by Motosport.
Just as the other reviews say Great product, easy to install
You may have to adapt it to your bike. Connector plugged right up, but my OEM flasher was 3-wire (had it's own ground), while the L-P unit's only got power in and flash feed out to the turn signals. This means that, as long as the indicator bulb was installed in the dash, I got 4-ways instead of blinkers with the switch on in either direction. Once I pulled the indicator bulb it worked fine, with a steady, normal flash rate. So as long as you're able to make it work with your OEM wiring, it's a great inexpensive solution.
Works great, Easy plug and play. Corrected my fast flash rate
Works well with Lockhart flush mount turn signals. Slows down the led lights back down to normal, flashes very fast without the relay
great product easy deal i just unplugged the old relay and plugged in the new one simple as that !