The Forcefield Pro L2 Body Armor Upgrade back inserts are designed to be fitted to motorcycle jackets that have an existing body armor pocket and are CE-approved to EN1621-2:2003 Level 2. Using Nitrex Evo, a unique high-tech triangular shock absorbing material, energy can be dispersed and absorbed evenly over the whole surface whilst remaining flexible and comfortable.

• Constructed from Nitrex Evo.
• RPT (Repeat Performance Technology).
• Molds to body shape; 3D molding.
• Perforated and breathable.
• Flexible.
• Lightweight.
• Thickness: 22 mm.
• CE-approved.

Sizing:

• 001 (maximum length x width): 385 x 285 mm (15.2 x 11.2").
• 002 (maximum length x width): 445 x 340 mm (17.5 x 13.4").
• 003 (maximum length x width): 425 x 270 mm (16.7 x 10.6").
• 005 (maximum length x width): 580 x 290 mm (22.8 x 11.4").
• 007 (maximum length x width): 440 x 250 mm (17.3 x 9.8").
• 008 (maximum length x width): 390 x 250 mm (15.4 x 9.8").
• 009 (maximum length x width): 520 x 280 mm (20.5 x 11.0").
• 010 (maximum length x width): 430 x 265 mm (16.9 x 10.4").
• 011 (maximum length x width): 500 x 265 mm (19.7 x 10.4").

How does it work?

Forcefield body armor harnesses energy, slows it down and manipulates it into a lesser force before it hits your body. Where applicable, Forcefield body armor is made using a triangular grid material that they call Molded Nitrex Evo. This is made of interconnecting walls where the width of the wall at the base is always wider than at the top. This is triangular in shape and these walls all interconnect, which means that the material is structurally solid and sound. While the triangular shape they create is the 'mechanics' behind the high performance, the other important element is the formulation and technical layering system used. It's light and is robust. The ideal material is one that, on impact, compresses to a degree but then returns to its original shape and size. This means that you are maximizing the length of time so that as much energy can be absorbed as possible. So, on impact, what you are trying to do is delay as long as possible the moment of peak transmitted force. This force is what does the damage to the body. Forcefield Body Armour material slows the moment of peak transmitted force and spreads the damaging forces over the whole surface, which means that the material is used to its maximum.

Repeat Performance Technology:

Forcefield body armor has been designed to withstand multiple impacts. Most armor types deteriorate after an impact, making it un-usable and ready for the trash - not Forcefield. Their research shows that people do not throw hard armor / honeycomb types away after a crash (as they should), and instead carry on using it - yet now it is not fit for purpose. Take it a step further - in a serious, high speed crash where multiple strikes take place in the same incident, normal armor is getting weaker at the very time you need it to be strong. Forcefield body armor is as strong at the end of the crash as it was at the beginning, thus giving the wearer the best possible chance for the least amount of injury.

3D Molding Characteristics of Forcefield Body Armour:

Forcefield body armor is soft, moldable, breathable and the most non-restrictive material design available. After wearing for a short period of time, the armor custom molds itself to the wearer's body shape - therefore creating not only a two-dimensional shape of the body part, but a three-dimensional form, molding in all directions, wrapping perfectly around the body, becoming a part of the wearer. It has the ability to move and flex with the person wearing it and is not restrictive in any way - it becomes a second skin. Forcefield body armor is close fitting, slim and part of the body. And, it is breathable; each garment Forcefield body armor makes is perforated with thousands of holes to ensure the heat can pass through the product, maintaining body comfort at all times.