The F2 Carbon represents race-inspired lightweight helmet technology utilizing lightweight Carbon / Kevlar construction. Though it shares many of the same construction features as the leading Formula model, the F2 Carbon has its own unique style and identity.
Shell is constructed using state-of-the-art, aircraft-grade woven carbon fiber and DuPont Kevlar composite materials, which create superior strength while remaining extremely light.
Dual-density EPS liner has two layers of EPS (expanded polystyrene), one softer along with one slightly harder, that combine to provide more progressive impact absorption for different levels of impact.
Three shells and four EPS sizes for a precise fit.
Multi-port air induction cooling system includes 10 intake and 4 exhaust vents that create massive airflow to keep your head cool.
Quad-vent goggle anti-fog vents above goggle eye port draw air from goggle to help clear away fog.
Custom molded rubber trim with integrated nose guard helps keep rocks and debris away from your nose.
New quick-release washable CoolMax comfort liner and cheek pads absorb sweat, provide plenty of ventilation, and are easy to remove and wash.
High-Flow ventilation system has EPS (expanded polystyrene) and comfort liner align to maximize airflow.
Helmet is constructed using super-strong, lightweight machined aluminum visor screws and stainless steel rivets and D-rings for superior strength and years of worry-free use.
Optional carbon fiber intake vent wing (sold separately) can be added to the helmet for increased direction of airflow on the front vents.
Includes a soft fleece helmet bag.
Cold weather kit includes a breath guard and vent plug kit.
Meets or exceeds the toughest safety standards on the market. SNELL 2015, DOT FMVSS 218 approved.
DUPONT AND KEVLAR ARE REGISTERED TRADEMARKS OF THE E.I. DUPONT DE NEMOURS AND COMPANY AND ARE USED WITH PERMISSION.
There have been no questions asked about the Fly Racing 2018 F2 Carbon Cold Weather Helmet.
20.8 - 21.625" (53 - 54 cm)
21.25 - 22" (55 - 56 cm)
6 7/8 - 7
22 - 23" (57 - 58 cm)
7 1/8 - 7 1/4
23 - 23.75" (59 - 60 cm)
7 3/8 - 7 1/2
24 - 24.5" (61 - 62 cm)
7 5/8 - 7 3/4
24.5 - 25.25" (63 - 64 cm)
7 7/8 - 8
18.25 - 19" (47 - 48 cm)
5 7/8 - 6
19 - 19.75" (49 - 50 cm)
6 1/8 - 6 1/4
20.5 - 21.25" (51 - 52 cm)
6 3/8 - 7 1/2
1. Measure your head size. To do this, pass a tape measure horizontally around your head at a height of about one inch above your eye- brows. When done properly, you will have measured the largest part of your head.
2. Check your measurement with the helmet sizing chart and select the closest size. As the helmet may not always meet your head size exactly, and your head measurement may fall between two sizes, first try the smaller size.
WHEN YOU RECEIVE YOUR HELMET
1. Expand the helmet opening by pulling outwards on each chinstrap, and slide your head into the helmet. If you are unfamiliar with helmets you may be reluctant to pull the helmet down, as it may feel too tight. Even if the helmet is difficult to put on, please use the smallest helmet possible. The helmet should feel snug. If the helmet is not tight, it is too big for you. New helmets will break in and loosen slightly over time.
2. Once the helmet is on:
Check that the helmet inner lining fits snugly all around your head.
Check that the top pad presses on the top of your head.
Check that the cheek pads press up against your cheeks. When you open and close your mouth, you should drag your teeth along the inside of your cheeks.
Check to make sure that you cannot easily slide your finger into the helmet along the side of your temple.
Hold the helmet with one hand on each side. Without moving your head, try to move the helmet up and down, and side to side. You should feel the skin of your head and face being pulled as you try to move the helmet. If you can move the helmet around easily, it is too big. Try a smaller size. Please note that during this check, the chinstraps should be properly fastened.