The triple clamp was bent and the holes were cross threaded. Not sure how they made it through QC
Write your review and you'll automatically be entered in our monthly drawing. Include an image or video to DOUBLE your chances to win!Write Your Review
Great product awesome solution so guards dont move when tip over solid mount
Installed in minutes with cycles pro bends be advised does not come with extended hardware for triple clamps will 1/2" longer bolts. Strong product quick delivery.
Purchased these for a crf450x. They don't come with replace bolts for the fork clamp. With how thick the part is, it left me about 1/4" of threads. That was not enough to torque the fork clamps & my local hardware stores didn't have the bolts I needed to replace them. Another thing is the bend for my handlebars set the guard about 2" from the clamp. I expected a little more for $40.
Works great. An excellent alternative to bar clamps mounting system. Fit great on my 11 yz450f. As mentioned, bolts are not included. They need to be a half inch longer.
These work great on triple clamps with forward facing bolts. They mated up easily (will a bit of fiddling to get the bolt started in its thread) with my Cycra Pro Bend guards. I did have to buy longer bolts for the triple clamp so they'd reach all the way through the mounts to the threads.
I have a 2015 KTM 150. Bought these assured that they would fit and find out that the bolts on the triple clamps are backwards on the KTM. They bolt in from the inside out not the opposite as these require. Solid piece of hardware though but if you do buy these you do need to buy longer bolts about an inch or so longer.
you will need longer bolts for these but the fit is great much better than the bar mounts.
Don't bother spending money on this unless you already have the upper triple clamp fork bolts you need to attach it... they are not included and the stock bolts will be too short.
It would have been nice if they told you this in the description.
Bought these clamps to mount the cycra pro bend bar guards to my Kawi 450 about 2 years ago. They allowed me to attach the inside of the bar guards to the top of the fork tube clamps instead of the typical mounting points. They are very solid and do not let the guards rotate during hard crashes. This allows awesome protection for your levers and your hands! A must for tight single track near trees and in rocky terrain. These are the strongest clamps I've ever used and have been put through some rigorous testing! Highly recommended!
Also you could visit a local bolt supply store and get a longer bolt.