Bell is stoked to see the resurgence of everyday people building and riding kick ass home-brewed machines in several categories of motorcycling in recent years. Those are the heart and soul of motorcycling and why Bell built this helmet. The Riot is purpose built, minimalistic, yet exceptionally functional in form. A timeless style combined with a modern interpretation in the attached, flip-up windscreen make this one a true Bell original. With five unique fiberglass composite shell sizes for a compact personal fit, and DOT/ECE certification, the Riot is taking over a street near you.
Fiberglass composite shell construction.
Five shell and EPS liner sizes ensure a low profile look.
Multi-density EPS liner.
Integrated flip-up face shield included.
NutraFog II anti-fog, anti-scratch and UV-protected shield.
Padded chin strap with leather D-ring closure.
Note: Helmet ships with Clear shield, other hues sold separately.
1. Measure your head size. To do this, pass a tape measure horizontally around your head at a height of about one inch above your eye brows. When done properly, you will have measured the largest part of your head.
2. Check your measurement with the helmet sizing chart and select the closest size. As the helmet may not always meet your head size exactly, and your head measurement may fall between two sizes, first try the smaller size.
WHEN YOU RECEIVE YOUR HELMET
1. Expand the helmet opening by pulling outwards on each chinstrap, and slide your head into the helmet. If you are unfamiliar with helmets you may be reluctant to pull the helmet down, as it may feel too tight. Even if the helmet is difficult to put on, please use the smallest helmet possible. The helmet should feel snug. If the helmet is not tight, it is too big for you. New helmets will break in and loosen slightly over time.
2. Once the helmet is on:
Check that the helmet inner lining fits snugly all around your head.
Check that the top pad presses on the top of your head.
Check that the cheek pads press up against your cheeks. When you open and close your mouth, you should drag your teeth along the inside of your cheeks.
Check to make sure that you cannot easily slide your finger into the helmet along the side of your temple.
Hold the helmet with one hand on each side. Without moving your head, try to move the helmet up and down, and side to side. You should feel the skin of your head and face being pulled as you try to move the helmet. If you can move the helmet around easily, it is too big. Try a smaller size. Please note that during this check, the chinstraps should be properly fastened.