Perhaps the most fabled name in the entire Arai lineup, the Corsair has long been renowned as one of the most advanced, highest quality helmets available anywhere in the world. It represents the culmination of Arai's vast experience in helmet design and unwavering focus on rider protection. And with features like the ingenious VAS shield mechanism, dramatically improved air flow and ventilation and an antimicrobial Eco-Pure liner, the Corsair-X has certainly earned its place as Arai's flagship model.
The Corsair-X has Arai's Intermediate Oval (IO) interior fit shape.
VAS Shield Mechanism:
The SAI shield on the Corsair-V has only a single axis pivot point but the Corsair-X has the new VAS mechanism with a variable axis incorporating a moving pivot point. By combining the pin trajectory, which is based on an imaginary axis, with the two trajectories of the double pivot point slot, the shield opens and closes smoothly even with the much lower shield mount position.
A dual-function lever releases both the side cover / pod and shield pin for quick and simple shield removal. Being able to see the shield mechanism allows for easier shield changes.
Improved Glance Off Ability:
The VAS pivot cover is now smaller and lower than the previous design, yielding an average of 24 mm more area above the cover. The shell is now smoother along the Snell test line in the temple area, thus increasing the helmet's ability to glance off objects during an impact.
Compared with the shell of the Corsair-V, the smooth area around the temple is increased by an average of 24 mm on the new VAS model. Having a rounder, smoother shell over a larger area increases the ability of a helmet to glance off objects more easily.
Improved Shield Latch:
The VAS latch captures and securely holds the shield closed to help prevent unexpected opening. In addition to the de-mist function, the larger latch allows for intuitive and seamless shield operation.
Created from super fiber and special synthetic fibers, and assembled by Arai experts, the shell provides both superb tensile strength and flexibility characteristics. Like the metal bands used to hold a wooden barrel together, a variety of carefully placed materials, combined with newly developed resins result in strong shells with less weight.
Diffuser Type 12:
New Type 12 diffusers are 20 mm longer and take in 19% more air than the previous design. In addition, the new air intake vents have three positions and are designed to help provide improved sealing which decreases road noise and water intrusion.
The fully removable interior comfort liner has been improved and updated with Eco-Pure material, which helps maintain a neutral pH level close to the skin. In addition, the new, soft frame material is more comfortable and features removable temple padding and brand new removable / replaceable crown pad to allow for a customized fit.
VAS Max-V (BV) Shield:
VAS Max Vision shield is standard to provide better visibility in all seasons and for all types of riding. A clear Pinlock insert is standard with the Corsair-X.
The new IC Duct-5 provides 11% more air flow than the previous Delta Duct 5. The new, bigger switch features three positions, is easier to open, and limits water intrusion when fully closed.
The new chin curtain accentuates the egg-shaped form of the outer shell. In addition, it blocks the intrusion of turbulent air from the underside of the helmet and increases negative pressure to enhance the function of the chin vent by drawing more air from the mouth area.
DOT and SNELL 2015 certified.
Notes: Helmet ships with a Clear face shield. Fluorescent and/or bright finishes fade over time and exposure to sunlight. This is normal and is not covered by warranty.
There have been no questions asked about the Arai Corsair X Helmet - Rea 2019.
20" - 20 1/2" (51 - 52 cm)
20 7/8" - 21 1/4" (53 - 54 cm)
6 1/2 - 6 5/8
21 5/8" - 22" (55 - 56 cm)
6 3/4 - 6 7/8
22 1/2" - 22 7/8" (57 - 58 cm)
7 - 7 1/8
23 1/4" - 23 5/8" (59 - 60 cm)
7 1/4 - 7 3/8
24" - 24 3/8" (61 - 62 cm)
7 1/2 - 6 5/8
24 3/4" - 25 1/8" (63 - 64 cm)
7 3/4 - 7 7/8
25 1/2" - 26" (65 - 66 cm)
8 - 8 1/8
1. Measure your head size. To do this, pass a tape measure horizontally around your head at a height of about one inch above your eye brows. When done properly, you will have measured the largest part of your head.
2. Check your measurement with the helmet sizing chart and select the closest size. As the helmet may not always meet your head size exactly, and your head measurement may fall between two sizes, first try the smaller size.
WHEN YOU RECEIVE YOUR HELMET
1. Expand the helmet opening by pulling outwards on each chinstrap, and slide your head into the helmet. If you are unfamiliar with helmets you may be reluctant to pull the helmet down, as it may feel too tight. Even if the helmet is difficult to put on, please use the smallest helmet possible. The helmet should feel snug. If the helmet is not tight, it is too big for you. New helmets will break in and loosen slightly over time.
2. Once the helmet is on:
Check that the helmet inner lining fits snugly all around your head.
Check that the top pad presses on the top of your head.
Check that the cheek pads press up against your cheeks. When you open and close your mouth, you should drag your teeth along the inside of your cheeks.
Check to make sure that you cannot easily slide your finger into the helmet along the side of your temple.
Hold the helmet with one hand on each side. Without moving your head, try to move the helmet up and down, and side to side. You should feel the skin of your head and face being pulled as you try to move the helmet. If you can move the helmet around easily, it is too big. Try a smaller size. Please note that during this check, the chinstraps should be properly fastened.