Always replace these bushings when u replace your fork seals. They r worth every penny.
Write your review and you'll automatically be entered in our monthly drawing. Include an image or video to DOUBLE your chances to win!Write Your Review
I bought this kit thinking that it be as good of quality as the rest of the products I've used from All Balls but no. The bushings didn't fit right or stay in place, and because of that the fork seals leaked first bounce off the stand. Really frustrated by this. Now I have to do the job all over again, but this time I will be buying from ktm.
A must have when rebuilding Fork seals, All Balls Products are Excellent !!
None of the o-rings or copper washers included in the kit fit the fork on my 1995 cr125, except for the largest o-ring for the fork cap. Luckily, the old o-rings and copper washers were still viable somehow, although judging by the state of the oil in the forks, they may not have ever been rebuilt. The seals and bushings fit fine and work fine, but I shouldn't have to worry about whether or not the old bits that are supposedly included in the kit can be reused.
Everything fit as it should, although, the bushings are shown with a Teflon coating on both sets......only one set had the Teflon. I'm hoping it won't matter. Time will tell. The OEM ones I removed had it and that's how you tell when they are bad.
Decent kit but no sense in putting o rings in the kit that don't fit anything.
Couldve used the o rings for the valves in the kit.
Over the years, have used these on a 2008 Honda 250 crf, a 2003 Suzuki DRZ 400, and most recently on a 2016 KTM 450 sx-f. The kits always had everything I needed, and never any fit or quality issues.
These bushings fit right up. The bikes forks haven’t been done in years and this product fit perfectly. Not sure over all how they will perform only a couple of rides. Pleased with this product
I've rebuilt motorcycle forks many times; everything was included in this kit and everything fit nicely when re-assembling.