A must own for washing your bike!
Write your review and you'll automatically be entered in our monthly drawing. Include an image or video to DOUBLE your chances to win!Write Your Review
Definitely a must have for bike maintenance.
I like to keep my bikes clean. Theres nothing nastier than pulling up a seat and seeing an airbox caked with grease and sand. When I powerwash the bikes after riding, I pull off the seat and air filter, and pop this into place. I can then get the power washer right into the airbox. I've never had an issue with water getting into the throttle body/intake boot when using this.
The twin air air box cover is easy to use and does it’s job so you can thoroughly clean your air box, but make sure to stuff your air boot with paper towels more than you may think you need otherwise while scrubbing or pressure washing will let water in very easily
Makes cleaning the air box a snap while cleaning the rest of the bike. When I get home I pop the air filter out, install this, and wash. Gives me the confidence I need knowing that sand and dirt isn’t left behind where it can cost me on my next ride.
The design was nice and it fit in the air box very well but the seal was made out of foam and not rubber.
Does the job, a little bit of water gets by if your really pressure washing hard but the airbox will be clean.
If you are a true motocrosser that values cleaning down their bike after each practice session, then you need to have one of these to protect the airbox from water when washing down the bike. Twin Air product is steadfast with this simple and effective design. Should be in everyone’s tool kit and/or cleaning kit.
Fits well, only issue, have to cut the supplied screw an inch and clean up the threads for a 08 crf 450r. Screw is long.
Feel free to call me as I am one of the account managers here .
Jason Robbins 503-783-5613