empty
Pivot Works Fork Seal & Bushing Kit
Pivot Works Fork Seal & Bushing Kit

$58.45 - $75.55
10% Off - Save up to $8.40

Description See Also: 62 Reviews 6 Questions Fitment Part Numbers
Item #PVW000B

Read More
62 Reviews
4.3 out of 5 stars
5 Star   42 4 Star   10 3 Star   6 2 Star   3 1 Star   4
Write a Review

Write your review and you'll automatically be entered in our monthly drawing. Include an image or video to DOUBLE your chances to win!

Write Your Review Write a review to win $500
All Reviews
Verified Purchaser
San Jose CA
Good

Fixed the leaking Showa forks on a 2002 CR250. Last year I rode after a week of heavy rain, mud had passed by the fork seal and destroyed the rubber. The damage finally caught up.
This was my first time rebuilding forks, I just followed the DIY video here and went at it. The job is actually quite simple (pending you have the right tools). I refilled with 2.5W synth oil
No long term report but so far so good

Don't purchase lasted one ride

First time I have ever used a pivot works kit and only got one ride out of them. I have never had seals only last one ride in 20 years of riding. I could not get the KYB parts in time so I went with these. All correct tools were used to install and 20 years of experience as well. Called customer service; all they said was they can direct me to pivot works which won't help me anyways. Motosport wouldn't step up either. My business will go elsewhere from now on.

Top 1000 Contributor Verified Purchaser
Millboro va
Good purchase

Ordered this product several times and am very satisfied and will continue to order this product

Verified Purchaser
Mt Pleasant, TX 75455, USA

This was great had all the seals and bushings and gaskets I needed

Missing a critical part for 2008 RM 250

I love Pivot Works products and have used them extensively for many rebuilds. In this case however, a critical o-ring is missing for the damper assembly (OEM part # 51175-37F80). This o-ring is usually one of the reasons the damper assembly fails. If they say that the kit includes everything then it should include everything. The only option is to order this part separately (2 required).

Verified Purchaser Top 250 Contributor
Pleasant Prairie, WI, USA
Fork seal and bushing kit

Used this kit on a 2012 yz 85. Works good, but did not include the o rings for the bottom valve that can leak oil. It did include o rings for top caps that cant leak oil unless bike is upside down. Do not understand that one.

Easy Install

Blew out my left front fork seal, super easy to take apart, as well as reassemble with the new parts. Great product so far, have yet to have any problems with it. The right fork isn't as easy (running a '13 RMZ250, with the spring compression, had to use some mcgayver techniques) but all in all really simple to install.

Verified Purchaser
west tenn
Fork kit

fixed my yz450

Verified Purchaser
Suffield ct
Seals blew in one ride.

I had these seals done by a local suspension company they lasted me one ride before they both blew out pretty pathetic

Northern California, CA
Good Purchase

It has seemed to work good so far, and was fairly easy to install if you know what your doing. I've been running these for about 5 months now with proper maintenance and they are holding up well. I will buy this as well as other Pivot Works products again when necessary.

Verified Purchaser
Nyack
Pivot works is where it's at

Pivot works is the only kit I've used for the past 5 years. I've done all my bike when needed and 7 of my friends bikes. No one has issues at all, no leaks and no missing parts. The kit is just what you need to have your bike feeling right.

Verified Purchaser
Freetown, ma
Perfect fit

Had all the parts I needed to rebuild, no problem going together.

Verified Purchaser
Tacoma, WA, USA
Great fork seal kit

I took it upon myself to replace my fork seals and figured while I was in there I should do the bushings as well. The pivot works kit included all the bushings and o-ring seals needed to freshen up my forks and cost less than a lot of other kits. I will use this kit again the next time I need to do my fork seals

Verified Purchaser
Works every time

I have been racing for many years and have used this product several times. I recommend it with complete confidence. If your fork seals are leaking go ahead and change the bushings as well you will thank me later. Have a great day

09 kx240f

Great kit includes everything you need to replace your seals and bushings. I rebuilt my forks myself for the first time and everything fit correctly and sealed as it should. Great product great price.

Verified Purchaser
Monterey, CA, USA
Great for the price

The fork seal and bushing kit includes EVERYTHING for both your outer fork tubes and inner damping assembly for a COMPLETE rebuild. They are easy to install yourself with a little common knowledge and have held up well after 5 rides. This kit did not come with fork bleeder o-rings however for my 2013 CRF250R but isn't a big deal. I would recommend the product to save some money over OEM replacement parts to anyone who needs a rebuild.

Top 1000 Contributor Verified Purchaser

Great product with a great fit!!!

Verified Purchaser
Warren,oh
Nice product!!

Good quality product but havent rode the bike yet to
Comment on longevity.

Verified Purchaser
Georgia
Works

Fit ok on my cr250. Working well after a couple of rides. I would prefer OEM parts but this is an easy and inexpensive way to order everything in one package.

Verified Purchaser
GA
Top Of The Line

We have always used and replaced our factory seals and bushings with Pivot Works they are simply the "BEST".

See 20 More Reviews
6 Questions
Answered:   6
Not Yet:   0
HuffyPuffy
Q: Will it work for a 2013 crf450r?
4 months 18 days ago
i have a 2013 crf450r with air forks is their any difference between spring fork seals and air fork seals?
Isaac
Top 100 Contributor Top 250 Contributor Top 50 Contributor Top 25 Contributor
4 months 1 day ago
A: Looking at just the fork seals for a 2013 Honda CRF450R Pivot Works shows they fit 09-14 models and many other makes and models that are not air forks. So it looks like there is not a difference in the seals for your model.
mike
Q: Does the kit include the fork dust seals?
1 year 5 months ago
MotoSportExpert
MotoSport Staff Expert
1 year 5 months ago
A: Yes the Pivot Works Fork Seal & Bushing Kit in clues wipers (dust seal).
Includes fork seals, wipers, upper and lower Teflon bushings and O-rings.
Frank
Q: Will these fit the 94 YZ250 forks? I don't think the forks changed between 1991 and 2012. Are these just not verified as working on the 94 model?
Over 3 years ago
MotoSportGrantK
Top 1 Contributor Expert MotoSport Staff
Over 3 years ago
A: No, the forks are different. Unfortunately Pivot Works doesn't currently offer their Fork Seal & Bushing Kit for the 1994 Yamaha YZ250. You can find replacement seals and bushings in our OEM section here: http://www.motosport.com/dirtbike/oem-parts/YAMAHA/1994/YZ250/FRONT-FORK
Barton
Q: I would like to verify that this seal kit will work with 43mm forks?
Over 3 years ago
MotoSportExpert
Top 1 Contributor
Over 3 years ago
A: Pivot Works Fork Seal & Bushing Kit are designed for specific models of bikes. As long as you are using the OEM forks on your 2002 KTM 250EXC, you will receive the correct kit. KTM had both the 43mm and 48mm forks depending on the bike model that year.
Joseph
Q: Does this kit come with a fork seal driver?
Over 4 years ago
MotoSportExpert
MotoSport Staff
Over 4 years ago Location: Portland, OR, USA
A: Unfortunately, the fork seal driver is not going to be included with this kit and must be purchased separately. The Motion Pro fork seal drivers work great. Size will vary depending on bike and you will need to order the fork seal driver that matches the diameter of your lower fork tube.
NC762
Over 4 years ago Location: Richlands, NC
A: No it doesn't. You can purchase a fork seal driver separate or very carefully use your old ones to tap the new ones in place.
Racerx5
Over 4 years ago Location: Holly Springs, MS 38635, USA
A: it doesn't come with fork seal driver but motosports sells one for great price!!!
AndyMX47
Over 4 years ago Location: Charlotte NC
A: No it does not - and you will need a fork seal driver. You can make one out of pvc pipe - but the motion pro drivers you buy work a lot better than home-made.
Blum503
2 years 1 month ago Location: Mayflower
A: It does not. It also does not come with oil. It is, however a complete parts set to rebuild both forks.
Fxlukefx
1 year 9 months ago Location: Texas, USA
A: No it does not you will need to purchase one separately.
Hondaman
1 year 7 months ago
A: It does not. You can purchase one in the tools section. You'll also need to buy oil to do this. You can also go to a local dealer tip have them install. Cost around $150.
Justin742
1 year 2 months ago Location: Massachusetts
A: No it does not. You would have to purchase the fork seal driver separately.
YAMAHA217
Q: Are these just for one fork or for both?
Over 7 years ago
rmzrider250
Top 500 Contributor
Over 7 years ago Location: Altoona, Pa
A: They come as a kit to do both forks
chaz426
Over 4 years ago
A: Both, and it has every piece you could need except the oil..
Mike
Over 4 years ago Location: Crestview, FL, USA
A: The pivot works kit come with all the bushings seals and o-rings to rebuild both front forks.
NC762
Over 4 years ago Location: Richlands, NC
A: These are for both forks.
Racerx5
Over 4 years ago Location: Holly Springs, MS 38635, USA
A: This kit comes with both.
AndyMX47
Over 4 years ago Location: Charlotte NC
A: Both forks
Blum503
2 years 1 month ago Location: Mayflower
A: It is a complete kit (minus oil and speciality tools) to rebuild both forks.
Blum503
2 years 1 month ago Location: Mayflower
A: Both
Hondaman
1 year 7 months ago
A: They are for both. You also need oil.
Justin742
1 year 2 months ago Location: Massachusetts
A: They are for both. Most kits come with both. Its recommended that you change both fork seals + bushings if your replacing one, due to putting more strain on the older seals and bushings.
1-6 of 6
Fitment
See all bikes that this part fits...
See Fitments
# Part Numbers
Product Variant Manufacturer Part #
Pivot Works Fork Seal & Bushing Kit PWFFK-H01-001
Pivot Works Fork Seal & Bushing Kit PWFFK-H02-020
Pivot Works Fork Seal & Bushing Kit PWFFK-H04-020
Pivot Works Fork Seal & Bushing Kit PWFFK-H05-001
Pivot Works Fork Seal & Bushing Kit PWFFK-H07-
Pivot Works Fork Seal & Bushing Kit PWFFK-H11-
Pivot Works Fork Seal & Bushing Kit N/A
Pivot Works Fork Seal & Bushing Kit PWFFK-H14-
Pivot Works Fork Seal & Bushing Kit PWFFK-K02-521
Pivot Works Fork Seal & Bushing Kit PWFFK-K03-021
Pivot Works Fork Seal & Bushing Kit PWFFK-K05-021
Pivot Works Fork Seal & Bushing Kit PWFFK-K06-021
Pivot Works Fork Seal & Bushing Kit PWFFK-K07-021
Pivot Works Fork Seal & Bushing Kit PWFFK-K08-021
Pivot Works Fork Seal & Bushing Kit PWFFK-K09-021
Pivot Works Fork Seal & Bushing Kit PWFFK-K11-021
Pivot Works Fork Seal & Bushing Kit PWFFK-K15-001
Pivot Works Fork Seal & Bushing Kit PWFFK-K17-
Pivot Works Fork Seal & Bushing Kit PWFFK-K18-
Pivot Works Fork Seal & Bushing Kit PWFFK-S05-021
Pivot Works Fork Seal & Bushing Kit PWFFK-S07-001
Pivot Works Fork Seal & Bushing Kit PWFFK-S08-020
Pivot Works Fork Seal & Bushing Kit PWFFK-S10-021
Pivot Works Fork Seal & Bushing Kit PWFFK-S11-020
Pivot Works Fork Seal & Bushing Kit PWFFK-S13-021
Pivot Works Fork Seal & Bushing Kit PWFFK-S18-008
Pivot Works Fork Seal & Bushing Kit PWFFK-T01-531
Pivot Works Fork Seal & Bushing Kit PWFFK-T02-531
Pivot Works Fork Seal & Bushing Kit PWFFK-T03-531
Pivot Works Fork Seal & Bushing Kit PWFFK-T04-531
Pivot Works Fork Seal & Bushing Kit PWFFK-T05-531
Pivot Works Fork Seal & Bushing Kit PWFFK-T06-531
Pivot Works Fork Seal & Bushing Kit N/A
Pivot Works Fork Seal & Bushing Kit PWFFK-Y01-421
Pivot Works Fork Seal & Bushing Kit PWFFK-Y04-400
Pivot Works Fork Seal & Bushing Kit PWFFK-Y05-400
Pivot Works Fork Seal & Bushing Kit PWFFK-Y07-400
Pivot Works Fork Seal & Bushing Kit PWFFK-Y08-000
Pivot Works Fork Seal & Bushing Kit PWFFK-Y08-400
Pivot Works Fork Seal & Bushing Kit PWFFK-Y11-008
Pivot Works Fork Seal & Bushing Kit PWFFK-Y15-000
Pivot Works Fork Seal & Bushing Kit PWFFK-H08-001
Pivot Works Fork Seal & Bushing Kit PWFFK-H09-008
Pivot Works Fork Seal & Bushing Kit PWFFK-H10-008
Pivot Works Fork Seal & Bushing Kit PWFFK-K01-020
Pivot Works Fork Seal & Bushing Kit PWFFK-K10-021
Pivot Works Fork Seal & Bushing Kit PWFFK-K19-000
Pivot Works Fork Seal & Bushing Kit PWFFK-S01-400
Pivot Works Fork Seal & Bushing Kit PWFFK-S03-021
Pivot Works Fork Seal & Bushing Kit PWFFK-S16-008
Pivot Works Fork Seal & Bushing Kit PWFFK-T08-000
Pivot Works Fork Seal & Bushing Kit PWFFK-T09-000
Pivot Works Fork Seal & Bushing Kit PWFFK-Y13-000
Pivot Works Fork Seal & Bushing Kit PWFFK-Y14-000
Report an Error