Yamaha OEM Parts GYTR OFF-ROAD FLYWHEEL [obs]

Yamaha OEM Parts GYTR OFF-ROAD FLYWHEEL [obs]
Yamaha OEM Parts GYTR OFF-ROAD FLYWHEEL [obs]

Unfortunately, we no longer carry this item. It may be discontinued or have just sold out.

Please contact Customer Service (1-888-676-8853) or search for another product if you continue to see this message.

Find other: Yamaha OEM Parts Flywheel Weights

Description See Also: 1 Review 2 Questions
Item #

Read More
1 Review
5.0 out of 5 stars
5 Star   1 4 Star   0 3 Star   0 2 Star   0 1 Star   0
Write a Review

Write your review and you'll automatically be entered in our monthly drawing. Include an image or video to DOUBLE your chances to win!

Write Your Review Write a review to win $500
All Reviews
Ryan
Troy, MI
Durability 5/5 Ease of Installation 4/5 Performance 5/5 Power 5/5
GYTR flywheel

A little tricky to put on but here's a trick I used. It's tough without a tool to hold the flywheel from spinning, but there's another option. After the cover is off the flywheel (left side) get it in 5th gear. Slide a peice of wood in between spokes of rear wheel ABOVE the swingarm so when you loosen the nut the motor won't turn. I used a survey stake, but another peice of wood will work. It didn't damage the spokes and allowed me to loosen the flywheel nut easily. Use your flywheel puller to get the stocker off (it screws in with reverse threads). Then tighten the outer bolt of flywheel puller with a socket (righty tighty). THe flywheel will pop off pretty easily. Slide new one on, add washer and nut and tighten. You'll need to put the wood stake through the spokes again BELOW the swingarm this time as you are tightening in the opposite direction. Don't use a steel bar or anything hard or you could damage spokes. Put your cover back on and you're done!

2 Questions
Answered:   2
Not Yet:   0
Nate
Q: Same Question as above...?
Over 3 years ago
Does this flywheel work with aftermarket covers??? The answer given did not address the question. Will this work under boysen and pro circuit covers????
MotoSportRyanT
MotoSport Staff Expert
Over 3 years ago Location: Portland, OR, USA
A: The GYTR Flywheel fits within the space of the OEM ignition cover only. Just like the Stealy Flywheel Weight, it will not clear under an aftermarket cover. You would still need a cover spacer to use this flywheel weight under a Boyesen or Pro Circuit Ignition Cover.
gth752y
Top 500 Contributor Top 250 Contributor
Location: Oklahoma City, OK, USA
Q: Does this Flywheel need a spacer to fit under aftermarket ingintion covers?
Over 3 years ago
Stealthy 9 oz flywheel requires a spacer to work with aftermarket ignition covers, does this product requite that as well?
MotoSportRyanT
MotoSport Staff Expert
Over 3 years ago
A: This flywheel weight should work fine with the OEM cover on your 2008 Yamaha YZ250. It shouldn't require any type of aftermarket cover.
1-2 of 2