Turner Performance Products Universal Bar Mounts - Oversized 1-1/8 Bars

Turner Performance Products Universal Bar Mounts - Oversized 1-1/8 Bars
Turner Performance Products Universal Bar Mounts - Oversized 1-1/8 Bars

Unfortunately, we no longer carry this item. It may be discontinued or have just sold out.

Please contact Customer Service (1-888-676-8853) or search for another product if you continue to see this message.

Find other: Turner Performance Products Bar Mounts

Description See Also: 20 Reviews 29 Questions
Item #

Read More
20 Reviews
4.2 out of 5 stars
5 Star   11 4 Star   7 3 Star   4 2 Star   0 1 Star   1
Write a Review

Write your review and you'll automatically be entered in our monthly drawing. Include an image or video to DOUBLE your chances to win!

Write Your Review Write a review to win $500
All Reviews
2wheelin247 Top 500 Contributor Verified Purchaser
Tea, SD
Not a direct replacement for 2003 Ktm 65

These have to be used with a 7/8 handle bar bottom clamp. I thought that they were a direct replacement and a direct bolt onto the triples, but that is not true unfortunately.

Burnt Hills, Ballston, NY 12027, USA
Nice mounts but has a few issues.

These mounts definitely look nice with my pro taper fuzion handlebars, the only problems i had with them is that the top clamp is too big and gave me trouble putting my bar pod on. The other issue is in-between the two clamps where you bar sits there is a gap, so the clamps don't fully touch each other. It also causes a clicking sound when i turn the bars. Other than that it was a nice product.

Turner Performance Products Universal Bar Mounts - Oversized 1-1/8 Bars
Validnickname Verified Purchaser
Solid product

Fit and finish is fantastic. Price is right. Would have been a bonus if they had markers for the bars.

Turner Performance Products Universal Bar Mounts - Oversized 1-1/8 Bars
Lowell ma
Bolts rust

Clamps seem to be able to do the job, wish you could get different colors ,but as a combo with renthal twin walls, main problem is the bolts rusted after the first wash, not even 12 hours old

RobK Verified Purchaser

good product... easy to install... would recommend

Alaskanwheelie Verified Purchaser
Great product and amazing customer service

These bar clamps were exactly what I was looking for, perfect height and look great. Also Motosport did an amazing job with their great customer service which makes everything easier! Overall great product!

Zoltan Verified Purchaser
New Jersey, USA
Good Product

It's a great product. I just wish it gave you instructions on which way to mount it. I had to research for that information.

Alaska, USA
Another clamp, be aware of size

The clamps look great and feel tougher than your standard OEM clamps. My only disappointment was that there is quite the gap between the lower and upper clamp when installing them with my Renthal Twinwall 997's. I don't believe there should be any gap at all.

Mazatk Verified Purchaser
2015 CRF150RB

No instructions or installation guide. Which way to face them, torque specs? Seem to be good quality other wise

Ready2rise Verified Purchaser
St. Louis, MO, USA
Little more than Expected

These risers are of very nice quality and look nice. I had to grab a set of the silver because black was sold out at the time and find that I actually prefer them! One downside is that they are advertised as having a 1/4 rise when indeed they are more of a 3/4 to 1 inch over standard just something to take note of when buying!

Honda820 Verified Purchaser
North Carolina, USA
Good Quality Clamps

This is the third set of Turner clamps that I have purchased. These clamps are top quality with an affordable price. Very nice fit and finish. As usual, Motosport came through with fast, reliable shipping.

Southbury, CT
Awesome 4 the price

These bar mounts are a great buy for the buck. I would stay away from the universal ones however because they raise your handlebars, buy the ones with the D-bolt. Also make sure you got a good fitted alan wrench because they like to strip easy!

MXCRF2008 Top 250 Contributor
Decatur, IL
Great Purchase

They are at a great price. Very easy to install. I highly recomend them if you have crashed and need to replace the bar mounts. Try these before you replace the entire top clamp.

Awesome Great buy

These things are awesome they save you lots of money by not having to buy a new triple clamp. They also bolt right on straight out of the package and look better then stock ones and fit my Renthal Twin Wall bars great.

wadestown west virgina
Barr mounts

there so easy to put on."and they look sick

invst4u Top 500 Contributor
Very Nice Mounts

I was a little concerend about buying this mount. After using placing them on the bike and using for two races. That concern was unfounded. Great bar mounts and I would buy again. One think to take note of. When mounting on the bike, one side is a bit longer than the other and it is difficult to tell which is which. Make sure they are the same direction, otherwise it will be off by about 1/8".

holly springs, NC

i think i have a better chance of bending me triple clamp then bending these, and there so easy to put on.

Grafton, WV
Good Mounts

These mounts are alright. They were good enough to put my handelbars on with.

sioux falls, sd
Easy install

worked well and were easy to install

zmer550 Top 250 Contributor
Sweet risers

These risers are very affordable and look sick. They mounted up with no trouble and are very stroung, as they are billet.

29 Questions
Answered:   29
Not Yet:   0
Location: North Carolina, USA
Q: Confused if I need to get OEM rubber cones...?
1 year ago
I have a 2006 kx450f. Are the "rubber mounts" designed to fit on the existing cones and washers or does the rubber mount option include these cones and washers? Thanks!
MotoSport Staff Expert
Over 12 months ago
A: Yes the "Rubber Mounts" replace the stock bar mounts and will work with the cones and washers.
Location: Ottawa, ON, Canada
Q: Will the silver ones rise my 2001 yamaha banshee a large amount? also will they fit on my renthal bars?
1 year 1 month ago
Expert MotoSport Staff
1 year 1 month ago
A: Yes the Turner Performance Products Universal oversized Bar Mounts will work on your 2001 Yamaha Banshee and would add a 1/4" of rise. Fits oversize 1-1/8" Renthal bars. Just be sure to correctly select the Year/Make/Model of your ATV before ordering so we can be sure to send you the correct mounts for your ATV. Also, feel free to give us a call at 888-676-8853 and we would be happy to help you out with your order.
Location: Belle Vernon, PA 15012, USA
Q: Do these bolt on to my original 7/8th built into my top triple clamps?
1 year 4 months ago
MotoSport Staff Expert
1 year 4 months ago
A: Yes the Universal Bar Mounts bolt into the stock 7/8" clamps allowing you to run oversized 1-1/8" bars.
Q: Will these give me 1/4" rise if i buy the black solid mount? Also whats the difference between rubber and solid mount?
1 year 7 months ago
not looking for the rise, just want to run oversized bars. bike is 2001 cr125
Expert MotoSport Staff
1 year 7 months ago
A: For your 2001 Honda CR125 you would want the rubber mount (the CR125 has rubber mounted bar mounts to dampen vibration) . These would replace the stock bar mounts, same height, on your CR125 allowing you to run 1-1/8" bars. Feel free to give us a call at 888-676-8853 and we would be happy to help you out with your order.
Q: Will these completely replace stock top and bottom clamps on a 400ex?
1 year 8 months ago
MotoSport Staff Expert
1 year 8 months ago
A: The Turner Universal Oversized 1-1/8 Bar Mounts would replace the stock 7/8" handlebar mounts. Feel free to give us a call at 888-676-8853 and we would be happy to help you out with your order.
Q: How can I order replacement bolts for these bar mounts?
Over 3 years ago
The "D" bolts i think they are considered, but I am not sure.
MotoSport Staff
Over 3 years ago Location: Portland, OR, USA
A: Unfortunately Turner does not offer replacement hardware for these bar mounts. The easiest way to obtain replacement hardware would be to take one of the bolts to your local hardware store to match it up.
Q: Are the bolts Metric or Imperial? Can the bolts be replaced with longer ones to allow for adding spacers to raise the bars?
Over 6 years ago
MotoSport Staff Expert
Over 6 years ago
A: they would be metric and replaceable, so you could add risers.
Location: Danbury, Texas
Q: Will this work for all brands of bars?
Over 7 years ago
Expert MotoSport Staff
Over 7 years ago Location: USA
A: these bar mounts will work for any 1 1/8" diameter handlebars (oversized).
Q: Should i buy these clamps if im installing renthal twin wall handlebars.?
Over 7 years ago
MotoSport Staff Expert
Over 7 years ago Location: USA
A: If you are going from 7/8" to oversized you'll need this or something equivalent.
Q: How long are the threaded studs on the rubber mount? and how far down the stud do the threads extend?
Over 7 years ago
i have a 2006 kdx200
MotoSport Staff
Over 7 years ago Location: Tualatin
A: not sure of the length of the threads but the rubber mounts will work with your stock KDX triple clamp
1-10 of 29