Turner Performance Products Oversized Bar Mounts With Pro Taper Evo Handlebar Combo

Turner Performance Products Oversized Bar Mounts With Pro Taper Evo Handlebar Combo
Turner Performance Products Oversized Bar Mounts With Pro Taper Evo Handlebar Combo

Unfortunately, we no longer carry this item. It may be discontinued or have just sold out.

Please contact Customer Service (1-888-676-8853) or search for another product if you continue to see this message.

Find other: Turner Performance Products Clamp/bar Combos

Description See Also: 5 Reviews 11 Questions Fitment
Item #

Read More
5 Reviews
4.4 out of 5 stars
5 Star   3 4 Star   1 3 Star   1 2 Star   0 1 Star   0
Write a Review

Write your review and you'll automatically be entered in our monthly drawing. Include an image or video to DOUBLE your chances to win!

Write Your Review Write a review to win $500
All Reviews
Bruce Verified Purchaser
Tampa Bay, Florida, USA
Comfortable

Easy to install. Excellent quality.fast response. All very good quality.

m462
walkerton in
Money well spent

Money well spent. The bars feel great.
The clamps fit perfect and are holding up really good.

Cole Verified Purchaser
Bent easily

They bars are sweet looking but i barley laid my bike down and the bars bent. I'd go with Twin walls next time.

maddog0311

put the bars on and they felt a little narrow from the stock bars which is why i got them. took about three rides to get used to it. but after that i love them.

rm85Lriderrrrrr Top 500 Contributor
Haverford, PA
Great Buy

these bars are tough and cant go though ALOT!! these bars are a great but and can save u some $$$$

11 Questions
Answered:   11
Not Yet:   0
wumbo
Location: Lakeside, CA, USA
Q: Best fit?
2 years 11 months ago
Best bend for a 2013 crf 150rb
MotoSportRyanT
Expert MotoSport Staff
2 years 11 months ago Location: Portland, OR, USA
A: All of the bars in this combo would be more for 250/450 sized bikes, you would need a bend that is specifically a "Mini" Bend to fit your Honda CRF150RB.
RM125num431
Q: Will it work on my 1996 suzuki rm 125?
Over 6 years ago
Will it work on my 1996 suzuki rm 125? because my stock clamps look alot diffrent from the ones in the picture
Nichro
Top 10 Contributor Top 25 Contributor
Over 6 years ago Location: Mays Landing, NJ
A: If you have a stock bar and clamps, the evo will not fit because it is oversized. You need to get the oversized bar clamps as well.
MotoSportExpert
MotoSport Staff Expert
2 years 4 months ago
A: Yes, you will need to choose the solid mount bar clamps for your 1996 RM125.
wonderboytj
Q: Will my stock 7/8 throttle tube fit on these bars?
Over 6 years ago
MotoX331
Top 500 Contributor Top 1000 Contributor
Over 6 years ago Location: Austin, TX
A: Yes.

The diameter for the bar ends does not change for any oversized bar. The diameter gradually tapers to a larger size beyond the grip area.
Nichro
Top 25 Contributor Top 10 Contributor
Over 6 years ago Location: Mays Landing, NJ
A: Yes, the bar ends are 7/8" in diameter. only the clamping portion is oversized. It then tapers down to allow all stock perches, etc.
wonderboytj
Q: Will my throttle tube off of my 01 RM250 fit these bars or do I have to buy a new one?
Over 7 years ago
Metalhed
Over 6 years ago Location: Pottstown,PA
A: Yes
Nichro
Top 25 Contributor Top 10 Contributor
Over 6 years ago Location: Mays Landing, NJ
A: It will fit. all ends are a 7/8" stock diameter
cltn450r
Q: What bend is closest to stock 04 trx 450r? maybe a little taller?
Over 7 years ago
Tuckere
Top 1000 Contributor
Over 7 years ago
A: fatbars have a lower bend that are compensated by the mounts..the cr high bend is probably one of the most comfortable fatbar bends. you can save money by getting the 7/8 bars and they have a higher rise without the clamps and are cheaper and just as strong as the fatbars
motoxcrazy119
Q: What Bend should i get?
Over 7 years ago
I really like the bend of the stock 7/8" renthals on my 08 Crf 250R. What bend would be the most similar?
james718
Expert MotoSport Staff
Over 7 years ago Location: Portland, OR
A: The stock Renthal Handlebar was the 971 Carmichael / Windham Bend. The Pro Taper EVO Bar that matches exactly is the Windham MX bend.
YZGodSpeed
Location: Michigan
Q: Can i just get the Evo bar, and have the stock mounts fit on my 05 yz125 or do i have to get this kit?
Over 7 years ago
james718
Expert MotoSport Staff
Over 7 years ago Location: Portland, OR
A: The EVO bars are 1 1/8" in diameter and stock bar mounts for an 05 YZ125 is 7/8". The EVO bar will only adapt if you purchase the aftermarket oversized bar mounts.
Nichro
Top 25 Contributor Top 10 Contributor
Over 6 years ago Location: Mays Landing, NJ
A: The evo is an oversized bar so your 7/8" stock bar clamps will not fit these bars. You need oversized clamps as well, which come in this kit.
kxkid94
Q: What color is the magneisium, is it the color of the bars in the picture?
Over 7 years ago
james718
Expert MotoSport Staff
Over 7 years ago Location: Portland, OR
A: The color in the picture depicts the color magnesium.

I've attached a little better image of the bar, you should be able to see the color mentioned.
Nichro
Top 25 Contributor Top 10 Contributor
Over 6 years ago Location: Mays Landing, NJ
A: Yes, that's the color. Evo's only come in black and magnesium.
kxboy08
Q: Will these fit my kx250f?
Over 7 years ago
will this mount kit fit on my stock tripple clamp
JesseC
MotoSport Staff
Over 7 years ago Location: Tualatin
A: Yes the turner mount kit will fit the stock kawi and honda clamps.
Nichro
Top 25 Contributor Top 10 Contributor
Over 6 years ago Location: Mays Landing, NJ
A: Yes, if you put in your correct make and model, this kit will fit onto your triple clamp.
kxkid94
Q: If i have moose bars would i need to buy the over size clamp for these protaper bars?
Over 7 years ago
JesseC
MotoSport Staff
Over 7 years ago Location: Tualatin
A: As long as they are the oversize 1-1/8" bar, you won't need the clamps.
1-10 of 11
Fitment
See all bikes that this part fits...
See Fitments