If you're a taller rider, this set up is a must. The comfort level increases dramatically with the Pro Taper RC High bars with the oversized bar mounts.
Turner Performance Products Oversized Bar Mounts With Pro Taper Contour Handlebar Combo
For the price a good buy.
No matter what I purchase, the priority modification, to any of my bikes is finding the right Pro Taper Bar for my bike. I have tried multiple other bars, but Pro Taper Contour Cr Hi bend is, by far my choice!
Bolted right on, takes about 10 minutes. Feels alot better than stock!
Used on a couple weekend rides. Bars felt good and comfortable (CR high). Caught a tree 4 hours in and bent the rubber mount bolt. Unable to condemn the bars as being bent. 03CRF450r
Purchased the gold henry/ reed bend. You really get more than what you pay for! I've had a few spills and they still look brand new. The clamps are also very tough.
This Is a great deal on awesome strong bars and Very nice, strong looking clamps. the old 7/8 Renthals on my ride were tweaked pretty good and one clamp was bent beyond repair. I put the Windham mid rm bend and black clamps on my 04 CR and I love them. Very comfortable. Bike has been laid over by me and my nutcase buddies and everything is still straight.
Absolutely love the KDub bend Contour bars. It was like a brand new bike/riding experience after installing them. I'm 6'2" so the taller bend and the height added by the bar mounts made this set up perfect for me. The Turner bar mounts are beefy and look great. The only thing that is a minor issue was the bots that go through the triple clamp are a little too long and will hang up on the wire/cable guides on the steering stem frame neck on the KX450. Easily remedied by bending the guides slightly. Just make sure everything still moves freely through the guides after bending them.
installed easily and quickly
crashed test already - no problems
Just got these ProTaper mid Bars with the Turner clamps for my 04 Banshee. After trying 3 different bar setups this one works the best not only for looks but feel and comfort. Love these bars, highly recommended.
I was impressed by the turner bar mounts. I thought theyd be poorly built but theyre beautiful. This combo is sweet and comes out quite a bit cheaper than if I had bought the parts seperate. Saving money is always a plus.
bought these bars to replace the stock Renthal bars on my 2005 Yamaha wr450 and i must say they are worth every penny . not only are they Pro Taper bars but u get the mounts and bar pad for $104.00 way worth the price . buying another set for my dads 2003 yamaha wr 250 .
Ive laid it down a few times in corners and nothing has bent just make sure you have the mounts tightened completly down in your triple clamps or you will bend ur mounts (my buddy did it) but nothing a hammer cant fix! :)
i got these bars a few days ago and they are great. ive rode at the track alot and droped my bike in a corner a few times and they hold up. the bar pad looks sick too. fits right on my 07 crf250 with no problem at all.
Bought these bars after i bent a pair of Standard pro taper bars in a roll over. And let me tell you these bars are strong so strong in fact that the next time my bike was rolled the bars held up, but the steering stem was not so lucky. I ride a 400ex and would recommend these to a friend.
I got the ATV Mid bend for my DVX 400. They are a liitle wider than stock wich makes it feel like your have more control over the quad. The only reason i gave it four stars was because the mounts didnt workout. The bolts that connect the bottom part of the aftermarket mounts to the steering stem were too short because the bottom part of the stock clamp is not threaded. so i used the bolts that are used to hold the aftermarket clamps together to hold them to the steering stem and went out and got some bolts to hold the clamps together. Other than that Great product.
These bars make all the difference in the world. You will never regret buying these bars! They make the bike feel more controlled and they have a more aggressive feel to them (i got the cr high rise). They do reduce the vibration quite a bit too (I've got a cr500 and it makes a big difference). Really i can't say enough good stuff about these bars. One week after i got these bars I crashed into an atv with my bike going about 60mph and bent my triple clamps, cracked my clutch cover, and cracked my frame in half and yet these bars still did not bend.
Really I think that any of the 1 1/8 bars on this site are good, but I think that these are one of the best. Also for the price i don't know why you would even bother buying any of the more expensive bars other than to look cool or something.
Ok, so I got these bars back in June of 08 for my 2007 CRF 450R. I rode a few times but my bike fell over and the bars bent. In only my opinion, they bend alot easier than the stock ones. I ruined the stock bars after a year so take it for what it's worth. I really like the offset though.
Fits great and has not let the bars rotate in them.
Great price, seems durable and looks pretty good.
"Rubber Mounts" replace the stock removable bar mounts on CR/CRF, KX/KXF and RMZ models.