This product is top notch, unfortunately I had to return mine, which was the easiest return I've done in my 41 years of being on this planet, anyway, the fit was great, overall look was great, just a awesome piece, but if your going to run a high bend bar as I'm doing on my Ltr, then you need longer brake lines and possibly a few extensions on your electrical side to. The throttle and clutch seemed to be fine but I could see premature wear happening later down the road because of the tightness. If your going to run this piece on a Ltr, I would recommend longer clutch cable and brake lines.
Trail Tech Bar Clamp
Write your review and you'll automatically be entered in our monthly drawing. Include an image or video to DOUBLE your chances to win!Write Your Review
Just finished installing clamp on my 07' 450r and it took 10 minutes. Just pop hood, disconnect wires from stock dash and reinstall everything. I went with low contour bars and brake lines reached but had to adjust the brake line clamp.
The clamp is nice looking and raises the handlebars a few inches, which is what I wanted.
I bought these for my ltr450 thinking they would go great with the flexx bars i have. Not a good idea at all. They are 4 inches tall at least and make all the cables and wires pull tight when you turn hard to one side or the other. Not a very good design if you ask me. Great for the price but I wont be buying them again.
Installed on my 08 400Ex and was a breeze. The only issue is i needed to drill another hole for reverse light and 1 more for vent tube. Was easy enough with drill and looks great. Only added about 2 inches in height but it actually worked out to my advantage. Definitely get the combo with the Renthal 1 1/8 bars...worth every penny. Makes my stock bars look like a kids set!!!
Great clamp but beware when purchasing for a 2007 Honda 300ex it comes with a plastic piece not shown in the picture and contains only one cut out for neutral. You may have to cut two more holes if you want to use the reverse lamp and another hole for your gas breather.
The actual clamp looks Great and i would reccomend the Handlebar Combo.
I would also make note that the clamp does add almost 4 inches so you may want to go with a low bend.
This clamp looks great and very easy to assemble and install.
These oversized bar clamps look very nice on any machine!!
clamp looked so good i bought one for both bikes