Fits perfectly and is a great piece to save your engine case from a broken/thrown chain. Does what it is supposed to without fear of shearing the bolts off in the case when impacted.
TM Designworks Case Saver
Write your review and you'll automatically be entered in our monthly drawing. Include an image or video to DOUBLE your chances to win!Write Your Review
Fast shipping like always!
fits good! very tight fit, but thats the way it should be! looks really good too
Decent product. Did not fit perfect on my KX250F had to do some trimming but once it is on it looks good and should function good.
For the TRX450R, no more hassle when it comes to changing out or clean front sprockets. The case saver is an open design that allows easy access to the front sprocket, and flows well with lines of the bike. It is a very tight fit when installed, but fits nonetheless. TM Designs does a great job when it comes to designing products that perform as well as they look.
I had a different style case saver and it broke and chain ended up braking case and costing me to fix it I know this one will not have that problem very stout and comes with bolts.
Fit was perfect on 2005 YZ250(2stroke).
Worked fine until rock sucked up into that little space between chain/counter-sprocket and case-saver. This PLASTIC case-saver compressed, and cracked under impact, however stayed in one piece. The really bad news is the rock was still able to blast a chunck out of my engine case right behind the saver.....The real winner here is JB Weld !!!!
LOOKING FOR A BETTER-MADE CASE SAVER. I think the thicker than stock is a good idea, only needs a better-stronger material.
I was excited to put this bad boy on my ride xmas morning, but that was a bust! The bolt holes don't line up, and the piece that rests against the stator case is too long. That piece could be modified, but not the holes. This does not fit a 2002 YZ250F; not even almost
Installed on a 2007 CRF450. Had to use a washer to shim between the case and part to make it fit right. Also did not align with chain, stuck out too far. Bottom line....needs to be modified to fit right.
This is made of plastic! not thick metal like it looks like. Not to mention "this product does fit your 2002 yz250f" It didnt fit at all bolt holes were not even close to lining up!
Put on a CRF 250X, fit was perfect. Butts up against the ignition cover to support the mounting points , which are prone to breaking if a chain derails , or a rock, etc gets caught between the chain and factory casesaver. Wider than the stock metal one also. Liked the fit and design so much I ordered a second one for my practice bike also.
had this case saver on my quad material is not as strong as it says... tends to bend easily and when my chain snapped it broke the case because it was able to wedge inside case saver. ill stick to the metal ones
Not much to say about a casesaver. Its there if it needs to do its job, and looks good while being there. Fit and finish is great as like the rest of the TM product line.