Tag Universal Bar Mounts

Tag Universal Bar Mounts
Tag Universal Bar Mounts

Unfortunately, we no longer carry this item. It may be discontinued or have just sold out.

Please contact Customer Service (1-888-676-8853) or search for another product if you continue to see this message.

Find other: Tag Bar Mounts

  • Description
  • 4 Reviews
  • 4 Questions
Description Item #

Allows fitment of T2, XT1 or any other brand of oversized 1-1/8" bars to your OEM 7/8" clamps. Precision machined from 6061 T6 aluminum.

  • 7/8" to 1-1/8" conversion.
  • Machined from 6061 T6 aluminum.
  • Raises bars 2/3" over stock height.
  • Should not be used with rubber mounted clamps.

Read More
4 Reviews
3.3 out of 5 stars
5 Star   1 4 Star   0 3 Star   2 2 Star   1 1 Star   0
Missouri, USA
One issue

Good quality machine work on the bar mounts. One bolt was not machined/ formed correctly and would've stripped the threads in the triple clamp. Seems like a .50 cent part is shedding a bad light on these quality mounts. Be careful when mounting them...

Verified Purchaser
Pensacola, FL
Good Setup but 1 small problem

These risers are slick, and solid, but there was 1 small problem. One of the bolts on the throttle side mount that connects to the bike was apparently mis-manufactured. The threading was gummed with metal about 1/8th inch down and cause me to have to muscle the bolt on to the bike, and presumably strip the existing female threading. If I ever have to remove them, I will probably need a whole new triple clamp.

Verified Purchaser
muncy pa

nice clamps went on easy alook nice havent got to test durability

Top 500 Contributor
Work good

These over sized bar clamps work good but are very expensive! Seems like the only reason they are charging you 70 dollars for this is because they can. Didn't like how there was no diagram or picture of how these should go. I know your thinking this is simple but the clamps are offset and can either offset to the outside or inside of the stock mounts. Wasn't sure how they should go but quickly found out when my bar pad wouldn't fit.

Read More
4 Questions
Answered:   4
Not Yet:   0
Location: San Antonio, TX, USA
Q: Will these fit my triple clamps??
1 year 5 months ago
on my 2012 KX 85 there is no bottom clamp its the triple clamp ad then the top clamp...i wouldn't see how you would screw in a bottom clamp, when the bottom clamp is the triple clamp.. thanks
MotoSport Staff Expert
1 year 5 months ago
A: Yes the Tag Universal Bar Mounts will work on your 2012 KX85. The universal oversized bar mounts bolt to your stock clamp/bar mount. Feel free to give us a call at 888-676-8853 and we would be happy to help you out with your order.
Q: Is there a noticable handling difference with these, or is the rise barely noticable?
1 year 11 months ago
Expert MotoSport Staff
1 year 11 months ago Location: Portland, OR, USA
A: These clamps will raise the bars 2/3" over stock height. It shouldn't really effect the handling of the bike and you can compensate for the clamp being higher if you were to run a bit lower bar.
Q: Fit fast flexx bar?
2 years 2 months ago
Will this product fit onto a fast flexx handlebars?
MotoSport Staff Expert
2 years 1 month ago
A: Yes, these will allow you to use Flexx bars on a bike with 7/8ths bar clamps. If your bike has an aftermarket option for a 1-1/8th triple clamp, I would suggest replacing the entire top clamp.
Location: Michigan, USA
Q: Strength?
2 years 10 months ago
It would seem that this product would break easily if you were to crash since your adding on to your triple clamp mount. The bolts don't seem strong enough. I've been determing to get this product but 2nd guessing that it will break easily. Can anyone give me insight of how tough an long lasting these bar adapters are? Thanks.
MotoSport Staff
2 years 10 months ago Location: Portland, OR, USA
A: I have not had any issues with customers breaking these. The way they are machined makes them fit snugly into the existing 7/8ths bar mounts makes them just as strong as the original setup. They are not recommended for use on rubber mounted bar mounts as they do create extra leverage on the mount bolt through the triple clamp which can cause them to bend easier in the even of a crash.
1-4 of 4

Read More

Find More