I haven't gotten around to asking for replacement grip glue. Both tubes i received are crusted on the inside with dry glue. Unlike Renthal glue, this is more like superglue, and the container isn't 100% sealed (no tip to cut off). Bad design
Tag Metals Grip Glue
Write your review and you'll automatically be entered in our monthly drawing. Include an image or video to DOUBLE your chances to win!Write Your Review
When I recieved this grip glue I took it out of the package to use and it was as hard as a rock. Not even one drop of glue. Im assuming the glue was also very old.
I applied exactly as instructions said and 1 it was the least "slippery" glue I've ever used and 2 after 2 full days of setting the grips still twist. Spray paint works better
This stuff works really well holding the grips on but WOW is it tough to deal with. It dries in seconds so don't waste any time getting the grip on the bike or you aren't going to be able to position it. This glue also caused the throttle to stick due to leaking under the throttle. I had to take the bars apart, scrape out the excess, sand the throttle side and graphite the inside of the mechanism in order to have a freely moving throttle.
Holds great, but dries really fast so don't waste time.
This stuff works great. It locks the grips to the bars and they do not spin. Just make sure you dont get this on your hands, because you can glue your hands together reletivly quick
Wow these slid right on. Dont get on your hands as it seems just like superglue.
This stuff works great. Sets fast. Make sure you put the glue inside the grip and on bar, slips right on. Definitely a better product than other brands contact glue type adhesive.
This product works great...Definitely does not mess around. Make haste when positioning your grips after you apply the glue because it sets up quickly.
this stuff holds great just dont try to put it on the bars then slide the grips on because you only have 20 seconds to do so. put on the grip then roll one half of it back and apply glue then put the grip back down. repeat for the other half of the grip
I race Desert on my YZ450 , i used this grip glue on my TAG grips & this glue holds!!!! i have used other glues & i cant seem to go though a race without it staying glued though the hole race , this stuff works!
This glue is def tuff, just like crazy glue...it was a fight to put the grips on though, had to put a LITTLE dish soap in the 2nd grip with glue on the handlebar and it was all good!
amazing glue, sticks soo good to the point where my fingers were stuck together for 2 hours till the skin just came off............ anyways this glue works amazing and sticks really good. no need to worry about grips slipping off at all