Sunline EC-2 Clutch Perch Assembly With Sunline Forged Lever

$40.00
2.80 out of 5 stars
 
Sunline EC-2 Clutch Perch Assembly With Sunline Forged Lever
Sunline EC-2 Clutch Perch Assembly With Sunline Forged Lever
  • Description
  • Reviews (20)
  • Q&A (11)
  • Fitment

The EC-2 Clutch Assembly is designed to work with any motorcycle. Forged perch with a Teflon® sleeve to allow the entire assembly to spin out of harm's way in the event of a crash yet staying firmly in place while riding. Oversized on the fly EZ-adjuster to dial in the precise feel with rubber gripper spikes for traction and sealed rubber boot. Combined with a form-fitted logo embossed front rubber cover to keep debris and water out of your lever and going down in your cable, which can cause catastrophic clutch failure. Optional Hot Start assembly sold separately.

  • Economical universal fit perch assembly with forged lever for any off-road motorcycle.
  • Forged perch and rotator clamp with Teflon® sleeve.
  • Oversized EZ-adjuster knob boot.
  • Form-fit front rubber cover with embossed logo.
  • For use with Hot Start or Non-Hot Start equipped bikes.
2.8 out of 5 stars (20)
2.8 out of 5 stars
5 star 0
4 star 0
3 star 0
2 star 0
1 star 0
See Terms and Conditions
1-10 of 20
Overall 1 out of 5 stars
Durability
Ease of Installation
Performance
Style
Nitsud248
Poor quality

Lever snapped off on the first ride. Dropped the bike in a turn and the lever snapped off at the perch.

Overall 1 out of 5 stars
Durability
Ease of Installation
Performance
Style
Verified Purchaser
Nitsud248
Worst lever ever

At first glance, this looked like a nice product. The lever didn't last one ride out on the track. Dropped the bike in a slow turn in the mud and the lever snapped off at the perch. Can not replace with the stock lever either. The stock lever is too thick to install in this perch. It's junk. Will never buy again.

Overall 1 out of 5 stars
Durability
Ease of Installation
Performance
Style
Verified Purchaser
Murloc
Did not fit its description

Attempted to install this on my pro taper bars for my 08 zuki rmz250, didnt fit even throughout extensive modification. would only recommend this for completely stock bikes needing a spare lever.

Overall 4 out of 5 stars
Durability
Ease of Installation
Performance
Style
Verified Purchaser
Berry
Not bad for the price

so far so good, easy install. good product for the money.

Overall 5 out of 5 stars
Durability
Ease of Installation
Performance
Style
Top 1000 Contributor Verified Purchaser
DUNNY
Great priced lever!

Cant beat the price of this clutch lever setup.

Overall 4 out of 5 stars
Durability
Ease of Installation
Performance
Style
Verified Purchaser
plomazto
Works well

pretty good, but nothing spectacular.

Overall 4 out of 5 stars
Durability
Ease of Installation
Performance
Style
Verified Purchaser
2smoker
Good lever for the price

Only bad thing about this product is the dust flap, ripped on my first ride.

Overall 4 out of 5 stars
Durability
Ease of Installation
Performance
Style
Verified Purchaser
Location: Omaha, NE
Alycium
Good clutch

i like the feel of the clutch and perch, easy change up while in the air. installation is kind of a pain as the plastic piece is pretty hard and doesnt mold much while trying to place the cable through but otherwise i love the look

Overall 2 out of 5 stars
Durability
Ease of Installation
Performance
Style
Location: Falmouth, MA
live2ride85
Not the best...

Lever and perch do their job but there isn't anything to keep dirt from getting in the clutch cable! Kinda sucks! You'll have dirt grinding in your clutch cable in no time! And the lever bends easily...

High point in Falmouth, MA
Overall 1 out of 5 stars
Top 500 Contributor
jackkx250f
Bad!!

This is by far the worst clutch lever i have ever bought a piece broke right as i was installing it and threading for the bolts didnt even fit eachother, do not buy spend the extra money for a asv or arc lever there alot better

1-10 of 20
Total Questions (11)
Questions with answers:
  11
Questions without answers:
0
sfr246
1-10 of 11
hjk437 4 months 6 days ago
Does this perch and lever assembly help with easing the pull at all?
I am looking to get a little bit easier pull from a clutch lever and am wondering if this one will do it, or what one is suggested.
MotoSport Staff Expert
4 months 5 days ago
MotoSportExpert
Not necessarily but it would depend on your current perch and lever. If it is bent and/or dirty this Sunline assembly may work a lot better for you. Usually though if the pull starts getting stiff the first place to start is to lube or replace your clutch cable. Feel free to give us a call at 888-676-8853 and we would be happy to help you out with your order.
sfr246 Over 8 months ago
Handlebar Fitment?
What is max diameter handlebar that this perch can be used on? Will they fit on Pro-Taper Evo bars?
MotoSport Staff Expert
Over 8 months ago
MotoSportExpert
The Pro-Taper Evo and all offload handlebars taper down to 7/8" at the control area to allow for standard controls. The Sunline EC-2 Clutch Perch Assembly will fit your EVO bars.
sfr246 Over 8 months ago
Lever?
Is the lever forged or die-cast? The title says "w/ Sunline Forged Lever" but the description says "Economical rotating assembly with die-cast lever." Also, do you sell replacement levers for this unit?
Expert MotoSport Staff
Over 8 months ago
MotoSportExpert
This would be a Forged perch and rotator clamp with Die-cast lever.
Brent 1 year 3 months ago
Does this fold back on itself?
Expert MotoSport Staff
1 year 3 months ago Location: Portland, OR, USA
MotoSportRyanT
No this is not a folding lever. I would recommend taking a look at the Sunline Clutch Perch Assembly With Vince V-1 MDX Lever ( http://www.motosport.com/dirtbike/SUNLINE-CLUTCH-PERCH-ASSEMBLY-WITH-VINCE-V1-MDX-LEVER ) as it would be a similar design with a folding lever.
Phil 1 year 4 months ago
Will the V-1 MDX lever fit this perch?
i have a V-1 MDX in my OEM perch and i need a new perch. i was wounding if V-1 MDX that fits my OEM perch will fit in the EC-2 clutch Assembly if not do you make a perch that will fit the OEM levers. thanks Phil
MotoSport Staff Expert
1 year 4 months ago Location: Portland, OR, USA
MotoSportRyanT
No. The V-1 MDX Lever you have will not work in the EC-2 Perch. You will likely need to order an OEM replacement perch for your Suzuki RMZ450 in order for that lever to fit properly. Here is a link to the OEM page with the perch for your bike: http://www.motosport.com/dirtbike/oem-parts/SUZUKI/2013/RMZ450/HANDLE-LEVER
shawn96 2 years ago Location: Ontario, Canada
Does this lever have a hot start built in/included?
MotoSport Staff
2 years ago Location: Portland, OR, USA
MotoSportExpert
Unfortunately this does not include the hot start lever and clamp, but in can purchased separately.
JERFYNOFEAR Over 5 years ago Location: MD
DOES THIS LEVER FOLD BACK ON ITSELF?
MotoSport Staff Expert
Over 5 years ago
dirt
yes
Top 1000 Contributor
Over 5 years ago
wnyoa701
no not at all
2 years 1 month ago Location: SoCalif
Parafrog
No
ilikehotgirls66 Over 5 years ago Location: millstadt, illinois
Does this have an adjustable reach?
MotoSport Staff Expert
Over 5 years ago
dirt
no
Top 1000 Contributor
Over 5 years ago
wnyoa701
yes
Over 5 years ago
Is this for a cable clutch or hydralic??
MotoSport Staff Expert
Over 5 years ago
hondarob
this is a cable clutch set up.
Top 250 Contributor Top 500 Contributor
Over 5 years ago Location: Texas
Texas
This is for a cable actuated clutch.
Top 1000 Contributor
Over 5 years ago
wnyoa701
cable
2 years 1 month ago Location: SoCalif
Parafrog
Cable
kyle175 Over 5 years ago
Does this lever have a hotstart lever?
MotoSport Staff Expert
Over 5 years ago Location: USA
james718
Unfortunately this does not include a hot start lever.
Top 1000 Contributor
Over 5 years ago
wnyoa701
no thats why its so cheap
2 years 1 month ago Location: SoCalif
Parafrog
No
1-10 of 11